Avaliação in vitro de superfícies de titânio irradiadas com laser de Er,Cr:YSGG

Detalhes bibliográficos
Autor(a) principal: Coletti, Felipe Leite
Data de Publicação: 2011
Outros Autores: Theodoro, Letícia Helena, Marcantonio, Adriana Rosemary Chierici [UNESP], Marcantonio Júnior, Elcio [UNESP], Garcia, Valdir Gouveia [UNESP]
Tipo de documento: Artigo
Idioma: por
Título da fonte: Repositório Institucional da UNESP
Texto Completo: http://revodontolunesp.com.br/article/51ae4aa81ef1faca3d003813
http://hdl.handle.net/11449/133604
Resumo: Introduction: As a new alternative in the complementary treatment lasers teem different systems were employed in the decontamination of dental surfaces implants however, some systems have caused significant changes in its surface. Purpose: Analyze by Scanning Electron Microscopy (SEM) the effects of laser irradiation of Er,Cr: YSGG on different surfaces of titanium. Material and method: Study of 20 titanium discs, and 10 Machined Surface (MS) and 10 surfaces treated with acid (AC). The 10 discs with the same treatment were divided into two groups with five units each, the irradiation was performed in powers of 1 W and 2 W. Result: Showed that the irradiation with 1 W of power resulted in no significant morphological changes in the MS-irradiated compared to non-irradiated surfaces. In MS surfaces, minor changes were observed in the increase of 1000× when compared to non-irradiated surface. With 2 W of power, there were no significant morphological changes in the MS, compared to non-irradiated areas. In AC some changes were observed in the increase of X 1000, showing areas of wear suggestive of treatment and some areas with melting point. Conclusion: Considering the results and the parameters used in this study it was concluded that the Er, Cr: YSGG irradiation can be used for the machined surfaces of implants, but in acid-treated surfaces irradiation parameters should be more controlled.
id UNSP_659b04ae5db20673f22d90de19f2406e
oai_identifier_str oai:repositorio.unesp.br:11449/133604
network_acronym_str UNSP
network_name_str Repositório Institucional da UNESP
repository_id_str 2946
spelling Avaliação in vitro de superfícies de titânio irradiadas com laser de Er,Cr:YSGGIn vitro evaluation of titanium surfaces treated with Er,Cr:YSGG laserLasersDental implantsScanning electron microscopyLasersImplantes dentáriosMicroscopia eletrônica de varreduraIntroduction: As a new alternative in the complementary treatment lasers teem different systems were employed in the decontamination of dental surfaces implants however, some systems have caused significant changes in its surface. Purpose: Analyze by Scanning Electron Microscopy (SEM) the effects of laser irradiation of Er,Cr: YSGG on different surfaces of titanium. Material and method: Study of 20 titanium discs, and 10 Machined Surface (MS) and 10 surfaces treated with acid (AC). The 10 discs with the same treatment were divided into two groups with five units each, the irradiation was performed in powers of 1 W and 2 W. Result: Showed that the irradiation with 1 W of power resulted in no significant morphological changes in the MS-irradiated compared to non-irradiated surfaces. In MS surfaces, minor changes were observed in the increase of 1000× when compared to non-irradiated surface. With 2 W of power, there were no significant morphological changes in the MS, compared to non-irradiated areas. In AC some changes were observed in the increase of X 1000, showing areas of wear suggestive of treatment and some areas with melting point. Conclusion: Considering the results and the parameters used in this study it was concluded that the Er, Cr: YSGG irradiation can be used for the machined surfaces of implants, but in acid-treated surfaces irradiation parameters should be more controlled.Introdução: Como uma nova alternativa no tratamento complementar, diferentes sistemas lasers têm sido empregados na descontaminação de superfícies de implantes dentários; entretanto, alguns sistemas promoveram alterações significantes nessas superfícies. Objetivo: O propósito deste estudo foi analisar, por meio de microscopia eletrônica de varredura (MEV), os efeitos da irradiação de diferentes superfícies de titânio com o laser de Er,Cr:YSGG (Erbium, Chromium, Yttrium, Scandium, Gallium, Garnet). Material e método: Foram utilizados 20 discos de titânio, sendo dez de Superfície Usinada (SU) e dez de Superfície tratada com Ataque Ácido (SAC). Os dez discos com mesmo tratamento foram divididos em dois grupos, que receberam irradiação nas potências de 1 W (5 unidades) e 2 W (5 unidades). As superfícies foram analisadas por meio de MEV. Resultado: Com 2 W de potência, não foram observadas alterações morfológicas significantes nas SU, quando comparadas às superfícies não irradiadas. Nas SAC, algumas alterações foram observadas no aumento de 1000×, apresentando áreas sugestivas de desgaste do tratamento além de algumas áreas com aspecto de derretimento. Conclusão: Diante dos resultados e com os parâmetros utilizados no presente estudo, conclui-se que o laser de Er,Cr:YSGG pode ser utilizado para irradiações de superfícies usinadas de implantes; porém, em superfícies tratadas com ácido, os parâmetros de irradiação devem ser mais controlados.Centro Universitário da Fundação Educacional de Barretos, Programa de Pós-Graduação em Ciências OdontológicasUniversidade Estadual Paulista, Departamento de Diagnóstico e Cirurgia, Faculdade de Odontologia de AraraquaraUniversidade Estadual Paulista, Departamento de Cirurgia e Clínica Integrada, Faculdade de Odontologia de AraçatubaCentro Universitário da Fundação Educacional de Barretos (UNIFEB)Universidade Estadual Paulista (Unesp)Coletti, Felipe LeiteTheodoro, Letícia HelenaMarcantonio, Adriana Rosemary Chierici [UNESP]Marcantonio Júnior, Elcio [UNESP]Garcia, Valdir Gouveia [UNESP]2016-01-28T16:55:49Z2016-01-28T16:55:49Z2011info:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/article258-254application/pdfhttp://revodontolunesp.com.br/article/51ae4aa81ef1faca3d003813Revista de Odontologia da UNESP, v. 40, n. 5, p. 258-254, 2011.1807-2577http://hdl.handle.net/11449/133604ISSN1807-2577-2011-40-05-258-254.pdf477444711812734640689213692331256100859465871929Currículo Lattesreponame:Repositório Institucional da UNESPinstname:Universidade Estadual Paulista (UNESP)instacron:UNESPporRevista de Odontologia da UNESPinfo:eu-repo/semantics/openAccess2023-10-26T06:07:23Zoai:repositorio.unesp.br:11449/133604Repositório InstitucionalPUBhttp://repositorio.unesp.br/oai/requestopendoar:29462023-10-26T06:07:23Repositório Institucional da UNESP - Universidade Estadual Paulista (UNESP)false
dc.title.none.fl_str_mv Avaliação in vitro de superfícies de titânio irradiadas com laser de Er,Cr:YSGG
In vitro evaluation of titanium surfaces treated with Er,Cr:YSGG laser
title Avaliação in vitro de superfícies de titânio irradiadas com laser de Er,Cr:YSGG
spellingShingle Avaliação in vitro de superfícies de titânio irradiadas com laser de Er,Cr:YSGG
Coletti, Felipe Leite
Lasers
Dental implants
Scanning electron microscopy
Lasers
Implantes dentários
Microscopia eletrônica de varredura
title_short Avaliação in vitro de superfícies de titânio irradiadas com laser de Er,Cr:YSGG
title_full Avaliação in vitro de superfícies de titânio irradiadas com laser de Er,Cr:YSGG
title_fullStr Avaliação in vitro de superfícies de titânio irradiadas com laser de Er,Cr:YSGG
title_full_unstemmed Avaliação in vitro de superfícies de titânio irradiadas com laser de Er,Cr:YSGG
title_sort Avaliação in vitro de superfícies de titânio irradiadas com laser de Er,Cr:YSGG
author Coletti, Felipe Leite
author_facet Coletti, Felipe Leite
Theodoro, Letícia Helena
Marcantonio, Adriana Rosemary Chierici [UNESP]
Marcantonio Júnior, Elcio [UNESP]
Garcia, Valdir Gouveia [UNESP]
author_role author
author2 Theodoro, Letícia Helena
Marcantonio, Adriana Rosemary Chierici [UNESP]
Marcantonio Júnior, Elcio [UNESP]
Garcia, Valdir Gouveia [UNESP]
author2_role author
author
author
author
dc.contributor.none.fl_str_mv Centro Universitário da Fundação Educacional de Barretos (UNIFEB)
Universidade Estadual Paulista (Unesp)
dc.contributor.author.fl_str_mv Coletti, Felipe Leite
Theodoro, Letícia Helena
Marcantonio, Adriana Rosemary Chierici [UNESP]
Marcantonio Júnior, Elcio [UNESP]
Garcia, Valdir Gouveia [UNESP]
dc.subject.por.fl_str_mv Lasers
Dental implants
Scanning electron microscopy
Lasers
Implantes dentários
Microscopia eletrônica de varredura
topic Lasers
Dental implants
Scanning electron microscopy
Lasers
Implantes dentários
Microscopia eletrônica de varredura
description Introduction: As a new alternative in the complementary treatment lasers teem different systems were employed in the decontamination of dental surfaces implants however, some systems have caused significant changes in its surface. Purpose: Analyze by Scanning Electron Microscopy (SEM) the effects of laser irradiation of Er,Cr: YSGG on different surfaces of titanium. Material and method: Study of 20 titanium discs, and 10 Machined Surface (MS) and 10 surfaces treated with acid (AC). The 10 discs with the same treatment were divided into two groups with five units each, the irradiation was performed in powers of 1 W and 2 W. Result: Showed that the irradiation with 1 W of power resulted in no significant morphological changes in the MS-irradiated compared to non-irradiated surfaces. In MS surfaces, minor changes were observed in the increase of 1000× when compared to non-irradiated surface. With 2 W of power, there were no significant morphological changes in the MS, compared to non-irradiated areas. In AC some changes were observed in the increase of X 1000, showing areas of wear suggestive of treatment and some areas with melting point. Conclusion: Considering the results and the parameters used in this study it was concluded that the Er, Cr: YSGG irradiation can be used for the machined surfaces of implants, but in acid-treated surfaces irradiation parameters should be more controlled.
publishDate 2011
dc.date.none.fl_str_mv 2011
2016-01-28T16:55:49Z
2016-01-28T16:55:49Z
dc.type.status.fl_str_mv info:eu-repo/semantics/publishedVersion
dc.type.driver.fl_str_mv info:eu-repo/semantics/article
format article
status_str publishedVersion
dc.identifier.uri.fl_str_mv http://revodontolunesp.com.br/article/51ae4aa81ef1faca3d003813
Revista de Odontologia da UNESP, v. 40, n. 5, p. 258-254, 2011.
1807-2577
http://hdl.handle.net/11449/133604
ISSN1807-2577-2011-40-05-258-254.pdf
4774447118127346
4068921369233125
6100859465871929
url http://revodontolunesp.com.br/article/51ae4aa81ef1faca3d003813
http://hdl.handle.net/11449/133604
identifier_str_mv Revista de Odontologia da UNESP, v. 40, n. 5, p. 258-254, 2011.
1807-2577
ISSN1807-2577-2011-40-05-258-254.pdf
4774447118127346
4068921369233125
6100859465871929
dc.language.iso.fl_str_mv por
language por
dc.relation.none.fl_str_mv Revista de Odontologia da UNESP
dc.rights.driver.fl_str_mv info:eu-repo/semantics/openAccess
eu_rights_str_mv openAccess
dc.format.none.fl_str_mv 258-254
application/pdf
dc.source.none.fl_str_mv Currículo Lattes
reponame:Repositório Institucional da UNESP
instname:Universidade Estadual Paulista (UNESP)
instacron:UNESP
instname_str Universidade Estadual Paulista (UNESP)
instacron_str UNESP
institution UNESP
reponame_str Repositório Institucional da UNESP
collection Repositório Institucional da UNESP
repository.name.fl_str_mv Repositório Institucional da UNESP - Universidade Estadual Paulista (UNESP)
repository.mail.fl_str_mv
_version_ 1799964704874954752