Optimization of minimum quantity lubrication in grinding with CBN wheels
Autor(a) principal: | |
---|---|
Data de Publicação: | 2013 |
Outros Autores: | , , |
Tipo de documento: | Capítulo de livro |
Idioma: | eng |
Título da fonte: | Repositório Institucional da UNESP |
Texto Completo: | http://dx.doi.org/10.1016/B978-0-85709-154-3.50004-0 http://hdl.handle.net/11449/227790 |
Resumo: | The application of minimum quantity lubrication (MQL) to metal machining has emerged as an alternative means to reduce cutting fluid usage, leading to cleaner production. In grinding, although MQL is considered to be progress regarding the environment, its application is restricted due to excessive heat generation and wheel clogging, which reduce final product quality and increase tool wear. This chapter reviews the research using MQL grinding aimed at improvements in terms of both wheel cleaning (by using an additional compressed air jet) and cutting fluid reduction (by adding water to the MQL oil). © 2013 Woodhead Publishing Limited All rights reserved. |
id |
UNSP_69245c1a19ba553979fa7015c2d44133 |
---|---|
oai_identifier_str |
oai:repositorio.unesp.br:11449/227790 |
network_acronym_str |
UNSP |
network_name_str |
Repositório Institucional da UNESP |
repository_id_str |
2946 |
spelling |
Optimization of minimum quantity lubrication in grinding with CBN wheelsCBNCubic boron nitrideGrindingMinimum quantity lubricationMQLWheel cleaningThe application of minimum quantity lubrication (MQL) to metal machining has emerged as an alternative means to reduce cutting fluid usage, leading to cleaner production. In grinding, although MQL is considered to be progress regarding the environment, its application is restricted due to excessive heat generation and wheel clogging, which reduce final product quality and increase tool wear. This chapter reviews the research using MQL grinding aimed at improvements in terms of both wheel cleaning (by using an additional compressed air jet) and cutting fluid reduction (by adding water to the MQL oil). © 2013 Woodhead Publishing Limited All rights reserved.Department of Mechanical Engineering School of Engineering University Estadual Paulista (Unesp), Bauru CampusUNICAMPDepartment of Mechanical Engineering School of Engineering University Estadual Paulista (Unesp), Bauru CampusUniversidade Estadual Paulista (UNESP)Universidade Estadual de Campinas (UNICAMP)Bianchi, E. C. [UNESP]Aguiar, P. R. [UNESP]Canarim, R. C. [UNESP]Diniz, A. E.2022-04-29T07:20:01Z2022-04-29T07:20:01Z2013-05-01info:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/bookPart113-133http://dx.doi.org/10.1016/B978-0-85709-154-3.50004-0Machining and Machine-Tools: Research and Development, p. 113-133.http://hdl.handle.net/11449/22779010.1016/B978-0-85709-154-3.50004-02-s2.0-84903913766Scopusreponame:Repositório Institucional da UNESPinstname:Universidade Estadual Paulista (UNESP)instacron:UNESPengMachining and Machine-Tools: Research and Developmentinfo:eu-repo/semantics/openAccess2022-04-29T07:20:01Zoai:repositorio.unesp.br:11449/227790Repositório InstitucionalPUBhttp://repositorio.unesp.br/oai/requestopendoar:29462022-04-29T07:20:01Repositório Institucional da UNESP - Universidade Estadual Paulista (UNESP)false |
dc.title.none.fl_str_mv |
Optimization of minimum quantity lubrication in grinding with CBN wheels |
title |
Optimization of minimum quantity lubrication in grinding with CBN wheels |
spellingShingle |
Optimization of minimum quantity lubrication in grinding with CBN wheels Bianchi, E. C. [UNESP] CBN Cubic boron nitride Grinding Minimum quantity lubrication MQL Wheel cleaning |
title_short |
Optimization of minimum quantity lubrication in grinding with CBN wheels |
title_full |
Optimization of minimum quantity lubrication in grinding with CBN wheels |
title_fullStr |
Optimization of minimum quantity lubrication in grinding with CBN wheels |
title_full_unstemmed |
Optimization of minimum quantity lubrication in grinding with CBN wheels |
title_sort |
Optimization of minimum quantity lubrication in grinding with CBN wheels |
author |
Bianchi, E. C. [UNESP] |
author_facet |
Bianchi, E. C. [UNESP] Aguiar, P. R. [UNESP] Canarim, R. C. [UNESP] Diniz, A. E. |
author_role |
author |
author2 |
Aguiar, P. R. [UNESP] Canarim, R. C. [UNESP] Diniz, A. E. |
author2_role |
author author author |
dc.contributor.none.fl_str_mv |
Universidade Estadual Paulista (UNESP) Universidade Estadual de Campinas (UNICAMP) |
dc.contributor.author.fl_str_mv |
Bianchi, E. C. [UNESP] Aguiar, P. R. [UNESP] Canarim, R. C. [UNESP] Diniz, A. E. |
dc.subject.por.fl_str_mv |
CBN Cubic boron nitride Grinding Minimum quantity lubrication MQL Wheel cleaning |
topic |
CBN Cubic boron nitride Grinding Minimum quantity lubrication MQL Wheel cleaning |
description |
The application of minimum quantity lubrication (MQL) to metal machining has emerged as an alternative means to reduce cutting fluid usage, leading to cleaner production. In grinding, although MQL is considered to be progress regarding the environment, its application is restricted due to excessive heat generation and wheel clogging, which reduce final product quality and increase tool wear. This chapter reviews the research using MQL grinding aimed at improvements in terms of both wheel cleaning (by using an additional compressed air jet) and cutting fluid reduction (by adding water to the MQL oil). © 2013 Woodhead Publishing Limited All rights reserved. |
publishDate |
2013 |
dc.date.none.fl_str_mv |
2013-05-01 2022-04-29T07:20:01Z 2022-04-29T07:20:01Z |
dc.type.status.fl_str_mv |
info:eu-repo/semantics/publishedVersion |
dc.type.driver.fl_str_mv |
info:eu-repo/semantics/bookPart |
format |
bookPart |
status_str |
publishedVersion |
dc.identifier.uri.fl_str_mv |
http://dx.doi.org/10.1016/B978-0-85709-154-3.50004-0 Machining and Machine-Tools: Research and Development, p. 113-133. http://hdl.handle.net/11449/227790 10.1016/B978-0-85709-154-3.50004-0 2-s2.0-84903913766 |
url |
http://dx.doi.org/10.1016/B978-0-85709-154-3.50004-0 http://hdl.handle.net/11449/227790 |
identifier_str_mv |
Machining and Machine-Tools: Research and Development, p. 113-133. 10.1016/B978-0-85709-154-3.50004-0 2-s2.0-84903913766 |
dc.language.iso.fl_str_mv |
eng |
language |
eng |
dc.relation.none.fl_str_mv |
Machining and Machine-Tools: Research and Development |
dc.rights.driver.fl_str_mv |
info:eu-repo/semantics/openAccess |
eu_rights_str_mv |
openAccess |
dc.format.none.fl_str_mv |
113-133 |
dc.source.none.fl_str_mv |
Scopus reponame:Repositório Institucional da UNESP instname:Universidade Estadual Paulista (UNESP) instacron:UNESP |
instname_str |
Universidade Estadual Paulista (UNESP) |
instacron_str |
UNESP |
institution |
UNESP |
reponame_str |
Repositório Institucional da UNESP |
collection |
Repositório Institucional da UNESP |
repository.name.fl_str_mv |
Repositório Institucional da UNESP - Universidade Estadual Paulista (UNESP) |
repository.mail.fl_str_mv |
|
_version_ |
1799964428500729856 |