Effect of dentin conditioners on the microtensile bond strength of a conventional and a self-etching primer adhesive system
Autor(a) principal: | |
---|---|
Data de Publicação: | 2005 |
Outros Autores: | |
Tipo de documento: | Artigo |
Idioma: | eng |
Título da fonte: | Repositório Institucional da UNESP |
Texto Completo: | http://dx.doi.org/10.1016/j.dental.2003.12.004 http://hdl.handle.net/11449/230969 |
Resumo: | The effect of different dentin conditioners on the microtensile bond strength of a self-etching primer and a total-etch adhesive system was investigated. Clearfil SE primer for 20s, 37% phosphoric acid for 15s, or 0.5 M ethylenediamine-tetraacetic acid (EDTA) for 30s are used as conditioners for the surface treatment of the flat dentin surfaces created on the extracted human third molar. it was found that the highest bond strength mean was for the combination SE primer/single bond, followed by the EDTA/clearfil SE bond and phosphoric acid/single bond. It was observed that smear layer removal with 0.5 M EDTA before using self-etching primer produced higher bond strengths. |
id |
UNSP_72d35b9653a2f68e7ad17c6b4906cc01 |
---|---|
oai_identifier_str |
oai:repositorio.unesp.br:11449/230969 |
network_acronym_str |
UNSP |
network_name_str |
Repositório Institucional da UNESP |
repository_id_str |
2946 |
spelling |
Effect of dentin conditioners on the microtensile bond strength of a conventional and a self-etching primer adhesive systemDentin adhesiveEDTAMicrotensile bond testSelf-etching primerSmear layerThe effect of different dentin conditioners on the microtensile bond strength of a self-etching primer and a total-etch adhesive system was investigated. Clearfil SE primer for 20s, 37% phosphoric acid for 15s, or 0.5 M ethylenediamine-tetraacetic acid (EDTA) for 30s are used as conditioners for the surface treatment of the flat dentin surfaces created on the extracted human third molar. it was found that the highest bond strength mean was for the combination SE primer/single bond, followed by the EDTA/clearfil SE bond and phosphoric acid/single bond. It was observed that smear layer removal with 0.5 M EDTA before using self-etching primer produced higher bond strengths.Dept. Orthodontics and Pediat. Dent. University of São Paulo State Araraquara Dental School, São PauloUniversidade de São Paulo (USP)Jacques, PaulaHebling, Josimeri2022-04-29T08:42:55Z2022-04-29T08:42:55Z2005-02-01info:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/article103-109http://dx.doi.org/10.1016/j.dental.2003.12.004Dental Materials, v. 21, n. 2, p. 103-109, 2005.0109-5641http://hdl.handle.net/11449/23096910.1016/j.dental.2003.12.0042-s2.0-12344324673Scopusreponame:Repositório Institucional da UNESPinstname:Universidade Estadual Paulista (UNESP)instacron:UNESPengDental Materialsinfo:eu-repo/semantics/openAccess2022-04-29T08:42:55Zoai:repositorio.unesp.br:11449/230969Repositório InstitucionalPUBhttp://repositorio.unesp.br/oai/requestopendoar:29462024-08-05T19:21:07.615905Repositório Institucional da UNESP - Universidade Estadual Paulista (UNESP)false |
dc.title.none.fl_str_mv |
Effect of dentin conditioners on the microtensile bond strength of a conventional and a self-etching primer adhesive system |
title |
Effect of dentin conditioners on the microtensile bond strength of a conventional and a self-etching primer adhesive system |
spellingShingle |
Effect of dentin conditioners on the microtensile bond strength of a conventional and a self-etching primer adhesive system Jacques, Paula Dentin adhesive EDTA Microtensile bond test Self-etching primer Smear layer |
title_short |
Effect of dentin conditioners on the microtensile bond strength of a conventional and a self-etching primer adhesive system |
title_full |
Effect of dentin conditioners on the microtensile bond strength of a conventional and a self-etching primer adhesive system |
title_fullStr |
Effect of dentin conditioners on the microtensile bond strength of a conventional and a self-etching primer adhesive system |
title_full_unstemmed |
Effect of dentin conditioners on the microtensile bond strength of a conventional and a self-etching primer adhesive system |
title_sort |
Effect of dentin conditioners on the microtensile bond strength of a conventional and a self-etching primer adhesive system |
author |
Jacques, Paula |
author_facet |
Jacques, Paula Hebling, Josimeri |
author_role |
author |
author2 |
Hebling, Josimeri |
author2_role |
author |
dc.contributor.none.fl_str_mv |
Universidade de São Paulo (USP) |
dc.contributor.author.fl_str_mv |
Jacques, Paula Hebling, Josimeri |
dc.subject.por.fl_str_mv |
Dentin adhesive EDTA Microtensile bond test Self-etching primer Smear layer |
topic |
Dentin adhesive EDTA Microtensile bond test Self-etching primer Smear layer |
description |
The effect of different dentin conditioners on the microtensile bond strength of a self-etching primer and a total-etch adhesive system was investigated. Clearfil SE primer for 20s, 37% phosphoric acid for 15s, or 0.5 M ethylenediamine-tetraacetic acid (EDTA) for 30s are used as conditioners for the surface treatment of the flat dentin surfaces created on the extracted human third molar. it was found that the highest bond strength mean was for the combination SE primer/single bond, followed by the EDTA/clearfil SE bond and phosphoric acid/single bond. It was observed that smear layer removal with 0.5 M EDTA before using self-etching primer produced higher bond strengths. |
publishDate |
2005 |
dc.date.none.fl_str_mv |
2005-02-01 2022-04-29T08:42:55Z 2022-04-29T08:42:55Z |
dc.type.status.fl_str_mv |
info:eu-repo/semantics/publishedVersion |
dc.type.driver.fl_str_mv |
info:eu-repo/semantics/article |
format |
article |
status_str |
publishedVersion |
dc.identifier.uri.fl_str_mv |
http://dx.doi.org/10.1016/j.dental.2003.12.004 Dental Materials, v. 21, n. 2, p. 103-109, 2005. 0109-5641 http://hdl.handle.net/11449/230969 10.1016/j.dental.2003.12.004 2-s2.0-12344324673 |
url |
http://dx.doi.org/10.1016/j.dental.2003.12.004 http://hdl.handle.net/11449/230969 |
identifier_str_mv |
Dental Materials, v. 21, n. 2, p. 103-109, 2005. 0109-5641 10.1016/j.dental.2003.12.004 2-s2.0-12344324673 |
dc.language.iso.fl_str_mv |
eng |
language |
eng |
dc.relation.none.fl_str_mv |
Dental Materials |
dc.rights.driver.fl_str_mv |
info:eu-repo/semantics/openAccess |
eu_rights_str_mv |
openAccess |
dc.format.none.fl_str_mv |
103-109 |
dc.source.none.fl_str_mv |
Scopus reponame:Repositório Institucional da UNESP instname:Universidade Estadual Paulista (UNESP) instacron:UNESP |
instname_str |
Universidade Estadual Paulista (UNESP) |
instacron_str |
UNESP |
institution |
UNESP |
reponame_str |
Repositório Institucional da UNESP |
collection |
Repositório Institucional da UNESP |
repository.name.fl_str_mv |
Repositório Institucional da UNESP - Universidade Estadual Paulista (UNESP) |
repository.mail.fl_str_mv |
|
_version_ |
1808129057097777152 |