Effect of bleaching agent on dental ceramics roughness.

• Autor(a) principal: Vanderlei, Aleska D
• Data de Publicação: 2010
• Outros Autores: Passos, Sheila P, Salazar-Marocho, Susana M, Pereira, Sarina Mb, Vásquez, Vanessa Zc, Bottino, Marco A
• Tipo de documento: Artigo
• Idioma: eng
• Título da fonte: Repositório Institucional da UNESP
• Texto Completo: http://www.actaodontologicalat.com/archivo/v23n3/articulo14.pdf; http://hdl.handle.net/11449/72147
• topic: aluminum silicate; drug derivative; peroxide; potassium derivative; tooth bleaching agent; urea; urea peroxide; VITA VM7; water; ceramics; chemistry; comparative study; feldspar; gel; human; laser; materials testing; scanning electron microscopy; surface property; temperature; time; tooth prosthesis; Aluminum Silicates; Ceramics; Dental Porcelain; Gels; Humans; Lasers; Materials Testing; Microscopy, Electron, Scanning; Peroxides; Potassium Compounds; Surface Properties; Temperature; Time Factors; Tooth Bleaching Agents; Urea; Water

The aim of this study was to assess the effect of bleaching agents (10% and 16% carbamide peroxide) on the roughness of two dental ceramics in vitro, and to analyze the surface by scanning electronic microscopy (SEM). Two bleaching agents (10% and 16%/Whiteness, FGM Gel) and two microparticle feldspathic ceramics (Vita VM7 and Vita VM13) were used. Forty disks of Vita VM7 and Vita VM13 ceramic were manufactured, measuring 4 mm in diameter and 4 mm high, in accordance with the manufacturers' recommendations, and were divided into 4 groups (n = 10): (1) VM7 + Whiteness 10%; (2) VM7 + Whiteness 16%; (3) VM13 + Whiteness 10%; (4) VM13 + Whiteness 16%. The bleaching agent was applied for 8 hours a day for 15 days and during the intervals the test specimens were stored in distilled water at 37 degrees C. The roughness (Ra) of the test specimens was evaluated before and after exposure to the bleaching agents using a laser roughness meter and the topographic description was analyzed by SEM. The statistical analysis of roughness data showed significant differences in the VM7 groups, using paired t-test, p = 0.05 (VM7 + Whiteness 10%: p = 0.002; VM7 + Whiteness 16%: p = 0.001) and two-sample t-test (VM7 p = 0.047), and no significant difference was found among VM13 groups. The qualitative SEM analysis showed different degrees of surface changes. The results suggest that the roughness of the tested ceramic surfaces increased after exposure to the bleaching agents.