Estudo experimental do uso de rebolos convencionais na usinagem do aço VP-50 utilizado na retificação cilíndrica, por meio de diferentes métodos de lubrirrefrigeração
Autor(a) principal: | |
---|---|
Data de Publicação: | 2016 |
Outros Autores: | , , , , |
Tipo de documento: | Artigo |
Idioma: | por |
Título da fonte: | Repositório Institucional da UNESP |
DOI: | 10.1590/S1517-707620160001.0015 |
Texto Completo: | http://dx.doi.org/10.1590/S1517-707620160001.0015 http://hdl.handle.net/11449/172775 |
Resumo: | The grinding is a precise machining process, one of the most expensive steps in the manufacture of in-jection molds for thermoplastic. In grinding the grinding wheel abrasive tool is responsible for removal. The number and types of abrasive grit sizes available are quite large and together with the number of possible alloys, structures and shapes of hardness beyond cause reach an enormous number of products. The knowledge of their technical characteristics, advantages, defects and working conditions are fundamental for product engi-neers, process and of course to the industrial area managers, which identify the most suitable grinding wheel to perform the grinding process. Among the steels used in the manufacture of molds for ther-moplastic injec-tion highlight the VP-50 steel, which was the steel used in this experiment being machined by the cylindrical grinding process. In the grinding process was also adopted for the purpose of experiment two methods of lubrication and cooling them with the conventional method with abundant lubrication and cooling and MQL is the technique with minimal amount of lubrication and cooling. The objective of this study was to analyze comparatively cutting performance, performed with three types of conventional wheels: grinding of white aluminum oxide, green silicon carbide grinding wheel and grinding of black silicon carbide with white alu-minum oxide. The results were analyzed and compared by the output variables of the three types of wheels, type of refrigeration and equivalent thickness. |
id |
UNSP_820bc0be6d660a89c1228b3334275297 |
---|---|
oai_identifier_str |
oai:repositorio.unesp.br:11449/172775 |
network_acronym_str |
UNSP |
network_name_str |
Repositório Institucional da UNESP |
repository_id_str |
2946 |
spelling |
Estudo experimental do uso de rebolos convencionais na usinagem do aço VP-50 utilizado na retificação cilíndrica, por meio de diferentes métodos de lubrirrefrigeraçãoExperimental study of the use of conventional wheels on steel processing VP-50 used in the cylindrical grinding by means of different methods of lubrication and coolingBlack silicon carbide grinding wheel with white aluminum oxideCylindrical grindingGrindstone white aluminum oxide grinding wheel green silicon carbideMinimum amount of lubricantThe grinding is a precise machining process, one of the most expensive steps in the manufacture of in-jection molds for thermoplastic. In grinding the grinding wheel abrasive tool is responsible for removal. The number and types of abrasive grit sizes available are quite large and together with the number of possible alloys, structures and shapes of hardness beyond cause reach an enormous number of products. The knowledge of their technical characteristics, advantages, defects and working conditions are fundamental for product engi-neers, process and of course to the industrial area managers, which identify the most suitable grinding wheel to perform the grinding process. Among the steels used in the manufacture of molds for ther-moplastic injec-tion highlight the VP-50 steel, which was the steel used in this experiment being machined by the cylindrical grinding process. In the grinding process was also adopted for the purpose of experiment two methods of lubrication and cooling them with the conventional method with abundant lubrication and cooling and MQL is the technique with minimal amount of lubrication and cooling. The objective of this study was to analyze comparatively cutting performance, performed with three types of conventional wheels: grinding of white aluminum oxide, green silicon carbide grinding wheel and grinding of black silicon carbide with white alu-minum oxide. The results were analyzed and compared by the output variables of the three types of wheels, type of refrigeration and equivalent thickness.Universidade Estadual Paulista - UNESP - Campus de Bauru Departamento de Engenharia Mecânica, Av. Luiz Edmundo Carrijo Coube, 14-01, Caixa Postal 473Universidade Estadual Paulista - UNESP - Campus de Bauru Departamento de Engenharia Mecânica, Av. Luiz Edmundo Carrijo Coube, 14-01, Caixa Postal 473Universidade Estadual Paulista (Unesp)dos Anjos, Marco Antonio [UNESP]Bianchi, Eduardo Carlos [UNESP]de Mello, Hamilton José [UNESP]de Aguiar, Paulo Roberto [UNESP]Estambasse, Eduardo Costa [UNESP]Hildebrandt, Rodolfo Alexandre [UNESP]2018-12-11T17:02:07Z2018-12-11T17:02:07Z2016-01-01info:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/article169-184application/pdfhttp://dx.doi.org/10.1590/S1517-707620160001.0015Revista Materia, v. 21, n. 1, p. 169-184, 2016.1517-7076http://hdl.handle.net/11449/17277510.1590/S1517-707620160001.00152-s2.0-849624768222-s2.0-84962476822.pdf14554003096600810000-0002-9934-4465Scopusreponame:Repositório Institucional da UNESPinstname:Universidade Estadual Paulista (UNESP)instacron:UNESPporRevista Materia0,188info:eu-repo/semantics/openAccess2024-06-28T13:55:08Zoai:repositorio.unesp.br:11449/172775Repositório InstitucionalPUBhttp://repositorio.unesp.br/oai/requestopendoar:29462024-08-06T00:06:57.514085Repositório Institucional da UNESP - Universidade Estadual Paulista (UNESP)false |
dc.title.none.fl_str_mv |
Estudo experimental do uso de rebolos convencionais na usinagem do aço VP-50 utilizado na retificação cilíndrica, por meio de diferentes métodos de lubrirrefrigeração Experimental study of the use of conventional wheels on steel processing VP-50 used in the cylindrical grinding by means of different methods of lubrication and cooling |
title |
Estudo experimental do uso de rebolos convencionais na usinagem do aço VP-50 utilizado na retificação cilíndrica, por meio de diferentes métodos de lubrirrefrigeração |
spellingShingle |
Estudo experimental do uso de rebolos convencionais na usinagem do aço VP-50 utilizado na retificação cilíndrica, por meio de diferentes métodos de lubrirrefrigeração Estudo experimental do uso de rebolos convencionais na usinagem do aço VP-50 utilizado na retificação cilíndrica, por meio de diferentes métodos de lubrirrefrigeração dos Anjos, Marco Antonio [UNESP] Black silicon carbide grinding wheel with white aluminum oxide Cylindrical grinding Grindstone white aluminum oxide grinding wheel green silicon carbide Minimum amount of lubricant dos Anjos, Marco Antonio [UNESP] Black silicon carbide grinding wheel with white aluminum oxide Cylindrical grinding Grindstone white aluminum oxide grinding wheel green silicon carbide Minimum amount of lubricant |
title_short |
Estudo experimental do uso de rebolos convencionais na usinagem do aço VP-50 utilizado na retificação cilíndrica, por meio de diferentes métodos de lubrirrefrigeração |
title_full |
Estudo experimental do uso de rebolos convencionais na usinagem do aço VP-50 utilizado na retificação cilíndrica, por meio de diferentes métodos de lubrirrefrigeração |
title_fullStr |
Estudo experimental do uso de rebolos convencionais na usinagem do aço VP-50 utilizado na retificação cilíndrica, por meio de diferentes métodos de lubrirrefrigeração Estudo experimental do uso de rebolos convencionais na usinagem do aço VP-50 utilizado na retificação cilíndrica, por meio de diferentes métodos de lubrirrefrigeração |
title_full_unstemmed |
Estudo experimental do uso de rebolos convencionais na usinagem do aço VP-50 utilizado na retificação cilíndrica, por meio de diferentes métodos de lubrirrefrigeração Estudo experimental do uso de rebolos convencionais na usinagem do aço VP-50 utilizado na retificação cilíndrica, por meio de diferentes métodos de lubrirrefrigeração |
title_sort |
Estudo experimental do uso de rebolos convencionais na usinagem do aço VP-50 utilizado na retificação cilíndrica, por meio de diferentes métodos de lubrirrefrigeração |
author |
dos Anjos, Marco Antonio [UNESP] |
author_facet |
dos Anjos, Marco Antonio [UNESP] dos Anjos, Marco Antonio [UNESP] Bianchi, Eduardo Carlos [UNESP] de Mello, Hamilton José [UNESP] de Aguiar, Paulo Roberto [UNESP] Estambasse, Eduardo Costa [UNESP] Hildebrandt, Rodolfo Alexandre [UNESP] Bianchi, Eduardo Carlos [UNESP] de Mello, Hamilton José [UNESP] de Aguiar, Paulo Roberto [UNESP] Estambasse, Eduardo Costa [UNESP] Hildebrandt, Rodolfo Alexandre [UNESP] |
author_role |
author |
author2 |
Bianchi, Eduardo Carlos [UNESP] de Mello, Hamilton José [UNESP] de Aguiar, Paulo Roberto [UNESP] Estambasse, Eduardo Costa [UNESP] Hildebrandt, Rodolfo Alexandre [UNESP] |
author2_role |
author author author author author |
dc.contributor.none.fl_str_mv |
Universidade Estadual Paulista (Unesp) |
dc.contributor.author.fl_str_mv |
dos Anjos, Marco Antonio [UNESP] Bianchi, Eduardo Carlos [UNESP] de Mello, Hamilton José [UNESP] de Aguiar, Paulo Roberto [UNESP] Estambasse, Eduardo Costa [UNESP] Hildebrandt, Rodolfo Alexandre [UNESP] |
dc.subject.por.fl_str_mv |
Black silicon carbide grinding wheel with white aluminum oxide Cylindrical grinding Grindstone white aluminum oxide grinding wheel green silicon carbide Minimum amount of lubricant |
topic |
Black silicon carbide grinding wheel with white aluminum oxide Cylindrical grinding Grindstone white aluminum oxide grinding wheel green silicon carbide Minimum amount of lubricant |
description |
The grinding is a precise machining process, one of the most expensive steps in the manufacture of in-jection molds for thermoplastic. In grinding the grinding wheel abrasive tool is responsible for removal. The number and types of abrasive grit sizes available are quite large and together with the number of possible alloys, structures and shapes of hardness beyond cause reach an enormous number of products. The knowledge of their technical characteristics, advantages, defects and working conditions are fundamental for product engi-neers, process and of course to the industrial area managers, which identify the most suitable grinding wheel to perform the grinding process. Among the steels used in the manufacture of molds for ther-moplastic injec-tion highlight the VP-50 steel, which was the steel used in this experiment being machined by the cylindrical grinding process. In the grinding process was also adopted for the purpose of experiment two methods of lubrication and cooling them with the conventional method with abundant lubrication and cooling and MQL is the technique with minimal amount of lubrication and cooling. The objective of this study was to analyze comparatively cutting performance, performed with three types of conventional wheels: grinding of white aluminum oxide, green silicon carbide grinding wheel and grinding of black silicon carbide with white alu-minum oxide. The results were analyzed and compared by the output variables of the three types of wheels, type of refrigeration and equivalent thickness. |
publishDate |
2016 |
dc.date.none.fl_str_mv |
2016-01-01 2018-12-11T17:02:07Z 2018-12-11T17:02:07Z |
dc.type.status.fl_str_mv |
info:eu-repo/semantics/publishedVersion |
dc.type.driver.fl_str_mv |
info:eu-repo/semantics/article |
format |
article |
status_str |
publishedVersion |
dc.identifier.uri.fl_str_mv |
http://dx.doi.org/10.1590/S1517-707620160001.0015 Revista Materia, v. 21, n. 1, p. 169-184, 2016. 1517-7076 http://hdl.handle.net/11449/172775 10.1590/S1517-707620160001.0015 2-s2.0-84962476822 2-s2.0-84962476822.pdf 1455400309660081 0000-0002-9934-4465 |
url |
http://dx.doi.org/10.1590/S1517-707620160001.0015 http://hdl.handle.net/11449/172775 |
identifier_str_mv |
Revista Materia, v. 21, n. 1, p. 169-184, 2016. 1517-7076 10.1590/S1517-707620160001.0015 2-s2.0-84962476822 2-s2.0-84962476822.pdf 1455400309660081 0000-0002-9934-4465 |
dc.language.iso.fl_str_mv |
por |
language |
por |
dc.relation.none.fl_str_mv |
Revista Materia 0,188 |
dc.rights.driver.fl_str_mv |
info:eu-repo/semantics/openAccess |
eu_rights_str_mv |
openAccess |
dc.format.none.fl_str_mv |
169-184 application/pdf |
dc.source.none.fl_str_mv |
Scopus reponame:Repositório Institucional da UNESP instname:Universidade Estadual Paulista (UNESP) instacron:UNESP |
instname_str |
Universidade Estadual Paulista (UNESP) |
instacron_str |
UNESP |
institution |
UNESP |
reponame_str |
Repositório Institucional da UNESP |
collection |
Repositório Institucional da UNESP |
repository.name.fl_str_mv |
Repositório Institucional da UNESP - Universidade Estadual Paulista (UNESP) |
repository.mail.fl_str_mv |
|
_version_ |
1822182247432716288 |
dc.identifier.doi.none.fl_str_mv |
10.1590/S1517-707620160001.0015 |