Electronic multiplex system using the Arduino platform to control and record the data of the temperatures profiles in heat storage tank for solar collector

Detalhes bibliográficos
Autor(a) principal: Avallone, Elson [UNESP]
Data de Publicação: 2016
Outros Autores: Cunha, Diogo Garcia, Padilha, Alcides [UNESP], Scalon, Vicente Luiz [UNESP]
Tipo de documento: Artigo
Idioma: eng
Título da fonte: Repositório Institucional da UNESP
Texto Completo: http://dx.doi.org/10.1007/s40095-016-0217-1
http://hdl.handle.net/11449/178209
Resumo: This work aims to build a monitoring thermal system based on low cost and using the Arduino MEGA platform. To the temperature, measurements are used thirty (30) digital sensors (DS18B20 Dallas) boarded together using three (3) wires, therefore, requiring the “One Wire” library to allow a correct read in the Arduino software. Using the Dallas sensors and the Arduino programming, it is possible monitoring the temperatures of up to 100 and twenty (120) different points, thereby significantly reducing electric problems and also the diameter of the thermal probe from uses only three (3) wires. The use of thirty (30) digital sensors significantly reduces the electrical problems and increases the processing speed using the multiplexing through the electrical connection to three (3) wires, called “normal power mode”. Using the thermal probe, which is installed, vertically inside the reservoir, it is possible to obtain the temperature graphical points, thus allowing the analysis of thermal stratification. The software used is Arduino IDE based in a language called CCS (C, C++ and “Wiring”). The water inside the reservoir stores energy in the form of sensible heat, based on the importance of the thermodynamics analysis result for this research, therefore, with some temperature, data samples obtained in thermal probe are possible to analyze the thermal stratification in the reservoir. The thermal efficiency of the energy stored in the water, either thermally stratified or homogeneous, analyzed to the first law of thermodynamics, it is the same. In the case of the second law of thermodynamics, the heat efficiency to heat homogenized water is less than the thermal efficiency in the stored water thermally stratified in the reservoir and both of them are lower than the first law of thermodynamics.
id UNSP_888752c90b5fe9396e98bda7337a8639
oai_identifier_str oai:repositorio.unesp.br:11449/178209
network_acronym_str UNSP
network_name_str Repositório Institucional da UNESP
repository_id_str 2946
spelling Electronic multiplex system using the Arduino platform to control and record the data of the temperatures profiles in heat storage tank for solar collectorArduino platformFirst and Second law of thermodynamicsSolar energyThermal stratificationThis work aims to build a monitoring thermal system based on low cost and using the Arduino MEGA platform. To the temperature, measurements are used thirty (30) digital sensors (DS18B20 Dallas) boarded together using three (3) wires, therefore, requiring the “One Wire” library to allow a correct read in the Arduino software. Using the Dallas sensors and the Arduino programming, it is possible monitoring the temperatures of up to 100 and twenty (120) different points, thereby significantly reducing electric problems and also the diameter of the thermal probe from uses only three (3) wires. The use of thirty (30) digital sensors significantly reduces the electrical problems and increases the processing speed using the multiplexing through the electrical connection to three (3) wires, called “normal power mode”. Using the thermal probe, which is installed, vertically inside the reservoir, it is possible to obtain the temperature graphical points, thus allowing the analysis of thermal stratification. The software used is Arduino IDE based in a language called CCS (C, C++ and “Wiring”). The water inside the reservoir stores energy in the form of sensible heat, based on the importance of the thermodynamics analysis result for this research, therefore, with some temperature, data samples obtained in thermal probe are possible to analyze the thermal stratification in the reservoir. The thermal efficiency of the energy stored in the water, either thermally stratified or homogeneous, analyzed to the first law of thermodynamics, it is the same. In the case of the second law of thermodynamics, the heat efficiency to heat homogenized water is less than the thermal efficiency in the stored water thermally stratified in the reservoir and both of them are lower than the first law of thermodynamics.UNESP - Univ Estadual Paulista Faculdade de Engenharia Departamento de Engenharia Mecânica, Av. Eng. Luiz Edmundo C. Coube 14-01Instituto Federal de Educação Ciência e Tecnologia de Sao Paulo, Av. Pastor José Dutra de Moraes, 239UNESP - Univ Estadual Paulista Faculdade de Engenharia Departamento de Engenharia Mecânica, Av. Eng. Luiz Edmundo C. Coube 14-01Universidade Estadual Paulista (Unesp)Ciência e Tecnologia de Sao PauloAvallone, Elson [UNESP]Cunha, Diogo GarciaPadilha, Alcides [UNESP]Scalon, Vicente Luiz [UNESP]2018-12-11T17:29:19Z2018-12-11T17:29:19Z2016-12-01info:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/article391-398application/pdfhttp://dx.doi.org/10.1007/s40095-016-0217-1International Journal of Energy and Environmental Engineering, v. 7, n. 4, p. 391-398, 2016.2251-68322008-9163http://hdl.handle.net/11449/17820910.1007/s40095-016-0217-12-s2.0-849829580622-s2.0-84982958062.pdfScopusreponame:Repositório Institucional da UNESPinstname:Universidade Estadual Paulista (UNESP)instacron:UNESPengInternational Journal of Energy and Environmental Engineering0,6020,602info:eu-repo/semantics/openAccess2024-06-28T13:54:36Zoai:repositorio.unesp.br:11449/178209Repositório InstitucionalPUBhttp://repositorio.unesp.br/oai/requestopendoar:29462024-08-05T15:25:06.078700Repositório Institucional da UNESP - Universidade Estadual Paulista (UNESP)false
dc.title.none.fl_str_mv Electronic multiplex system using the Arduino platform to control and record the data of the temperatures profiles in heat storage tank for solar collector
title Electronic multiplex system using the Arduino platform to control and record the data of the temperatures profiles in heat storage tank for solar collector
spellingShingle Electronic multiplex system using the Arduino platform to control and record the data of the temperatures profiles in heat storage tank for solar collector
Avallone, Elson [UNESP]
Arduino platform
First and Second law of thermodynamics
Solar energy
Thermal stratification
title_short Electronic multiplex system using the Arduino platform to control and record the data of the temperatures profiles in heat storage tank for solar collector
title_full Electronic multiplex system using the Arduino platform to control and record the data of the temperatures profiles in heat storage tank for solar collector
title_fullStr Electronic multiplex system using the Arduino platform to control and record the data of the temperatures profiles in heat storage tank for solar collector
title_full_unstemmed Electronic multiplex system using the Arduino platform to control and record the data of the temperatures profiles in heat storage tank for solar collector
title_sort Electronic multiplex system using the Arduino platform to control and record the data of the temperatures profiles in heat storage tank for solar collector
author Avallone, Elson [UNESP]
author_facet Avallone, Elson [UNESP]
Cunha, Diogo Garcia
Padilha, Alcides [UNESP]
Scalon, Vicente Luiz [UNESP]
author_role author
author2 Cunha, Diogo Garcia
Padilha, Alcides [UNESP]
Scalon, Vicente Luiz [UNESP]
author2_role author
author
author
dc.contributor.none.fl_str_mv Universidade Estadual Paulista (Unesp)
Ciência e Tecnologia de Sao Paulo
dc.contributor.author.fl_str_mv Avallone, Elson [UNESP]
Cunha, Diogo Garcia
Padilha, Alcides [UNESP]
Scalon, Vicente Luiz [UNESP]
dc.subject.por.fl_str_mv Arduino platform
First and Second law of thermodynamics
Solar energy
Thermal stratification
topic Arduino platform
First and Second law of thermodynamics
Solar energy
Thermal stratification
description This work aims to build a monitoring thermal system based on low cost and using the Arduino MEGA platform. To the temperature, measurements are used thirty (30) digital sensors (DS18B20 Dallas) boarded together using three (3) wires, therefore, requiring the “One Wire” library to allow a correct read in the Arduino software. Using the Dallas sensors and the Arduino programming, it is possible monitoring the temperatures of up to 100 and twenty (120) different points, thereby significantly reducing electric problems and also the diameter of the thermal probe from uses only three (3) wires. The use of thirty (30) digital sensors significantly reduces the electrical problems and increases the processing speed using the multiplexing through the electrical connection to three (3) wires, called “normal power mode”. Using the thermal probe, which is installed, vertically inside the reservoir, it is possible to obtain the temperature graphical points, thus allowing the analysis of thermal stratification. The software used is Arduino IDE based in a language called CCS (C, C++ and “Wiring”). The water inside the reservoir stores energy in the form of sensible heat, based on the importance of the thermodynamics analysis result for this research, therefore, with some temperature, data samples obtained in thermal probe are possible to analyze the thermal stratification in the reservoir. The thermal efficiency of the energy stored in the water, either thermally stratified or homogeneous, analyzed to the first law of thermodynamics, it is the same. In the case of the second law of thermodynamics, the heat efficiency to heat homogenized water is less than the thermal efficiency in the stored water thermally stratified in the reservoir and both of them are lower than the first law of thermodynamics.
publishDate 2016
dc.date.none.fl_str_mv 2016-12-01
2018-12-11T17:29:19Z
2018-12-11T17:29:19Z
dc.type.status.fl_str_mv info:eu-repo/semantics/publishedVersion
dc.type.driver.fl_str_mv info:eu-repo/semantics/article
format article
status_str publishedVersion
dc.identifier.uri.fl_str_mv http://dx.doi.org/10.1007/s40095-016-0217-1
International Journal of Energy and Environmental Engineering, v. 7, n. 4, p. 391-398, 2016.
2251-6832
2008-9163
http://hdl.handle.net/11449/178209
10.1007/s40095-016-0217-1
2-s2.0-84982958062
2-s2.0-84982958062.pdf
url http://dx.doi.org/10.1007/s40095-016-0217-1
http://hdl.handle.net/11449/178209
identifier_str_mv International Journal of Energy and Environmental Engineering, v. 7, n. 4, p. 391-398, 2016.
2251-6832
2008-9163
10.1007/s40095-016-0217-1
2-s2.0-84982958062
2-s2.0-84982958062.pdf
dc.language.iso.fl_str_mv eng
language eng
dc.relation.none.fl_str_mv International Journal of Energy and Environmental Engineering
0,602
0,602
dc.rights.driver.fl_str_mv info:eu-repo/semantics/openAccess
eu_rights_str_mv openAccess
dc.format.none.fl_str_mv 391-398
application/pdf
dc.source.none.fl_str_mv Scopus
reponame:Repositório Institucional da UNESP
instname:Universidade Estadual Paulista (UNESP)
instacron:UNESP
instname_str Universidade Estadual Paulista (UNESP)
instacron_str UNESP
institution UNESP
reponame_str Repositório Institucional da UNESP
collection Repositório Institucional da UNESP
repository.name.fl_str_mv Repositório Institucional da UNESP - Universidade Estadual Paulista (UNESP)
repository.mail.fl_str_mv
_version_ 1808128221471834112