Desgaste das facas do corte basal na qualidade da colheita mecanizada de cana-de-açúcar

• Autor(a) principal: Cassia, Marcelo Tufaile [UNESP]
• Data de Publicação: 2014
• Outros Autores: Silva, Rouverson Pereira Da [UNESP], Paixão, Carla Segatto Strini [UNESP], Bertonha, Rafael Scabelo [UNESP], Cavichioli, Fábio Alexandre [UNESP]
• Tipo de documento: Artigo
• Idioma: por
• Título da fonte: Repositório Institucional da UNESP
• Texto Completo: http://dx.doi.org/10.1590/S0103-84782014000600006; http://hdl.handle.net/11449/109953
• topic: cut height; control charts; statistical quality control; ratoon damages; altura de corte; cartas de controle; controle estatístico de qualidade; Danos às soqueiras

During the sugarcane mechanized harvester process, the wear of base cutting knives is directly correlated to the quality of the cut made by the machines, and the use of quality control tools important in monitoring this process. Thus, the present study in Ribeirão Preto region aimed to assess the knives cut baseline and damage caused to wear brass knuckles in mechanized harvesting of cane raw sugar, from the viewpoint of statistical quality control (SQC). The wear of the knives was quantified by mass loss and its dimensions, while cutting quality was assessed by cutting height and damage to stumps visually classified according to the level of damage caused. The results showed that the wear of the knives was more pronounced in certain periods of use, but still within control standards. The cutting height was not affected by the wear of the knives, keeping within the limits of desirable quality for operation. Eventually damage the stumps ranged among themselves depending on each face of the cutting knives evaluated, and the predominance of certain classes of damage in each cutting face, but always remained in statistical control.