Estudo do aumento no diâmetro do corpo de um rebite a ser cravado em furos acima da tolerância de projeto
Autor(a) principal: | |
---|---|
Data de Publicação: | 2015 |
Tipo de documento: | Trabalho de conclusão de curso |
Idioma: | por |
Título da fonte: | Repositório Institucional da UNESP |
Texto Completo: | http://hdl.handle.net/11449/123068 http://www.athena.biblioteca.unesp.br/exlibris/bd/capelo/2015-05-06/000823334.pdf |
Resumo: | In this work are discussed the main types of rivets, their characteristics and applicability within the Aeronautical Industry branch. Here are highlighted the solid rivets, showing off its layout, forms and limits of installation, that are required by aviation regulators. The riveting is a popular and simple procedure of fixing and joining two or more parts, and like any other manufacturing process is subject to process deviations that in some situations are beyond the limits of tolerance. One of these deviations is when the hole diameter exceeds the one proposed in project and which is limited by the rule of edge distance. The overall objective here is to study a possible solution to this problem: the installation of a rivet that has his diameter previously increased by compression. Observe the hole filling after riveting, detect the presence of cracks, discover the yield curve of the fasteners and their the crushing limits for failure prediction are tools used to verify this proposal. They demonstrate, at the end of study, the inefficiency of this procedure, with results that go against the safe fixing of parts in a structure |
id |
UNSP_b50690be5c73cc8ad2be0e6f6d3928ac |
---|---|
oai_identifier_str |
oai:repositorio.unesp.br:11449/123068 |
network_acronym_str |
UNSP |
network_name_str |
Repositório Institucional da UNESP |
repository_id_str |
2946 |
spelling |
Estudo do aumento no diâmetro do corpo de um rebite a ser cravado em furos acima da tolerância de projetoLigações rebitadasTolerancia (Engenharia)EscoamentoRiveted jointsIn this work are discussed the main types of rivets, their characteristics and applicability within the Aeronautical Industry branch. Here are highlighted the solid rivets, showing off its layout, forms and limits of installation, that are required by aviation regulators. The riveting is a popular and simple procedure of fixing and joining two or more parts, and like any other manufacturing process is subject to process deviations that in some situations are beyond the limits of tolerance. One of these deviations is when the hole diameter exceeds the one proposed in project and which is limited by the rule of edge distance. The overall objective here is to study a possible solution to this problem: the installation of a rivet that has his diameter previously increased by compression. Observe the hole filling after riveting, detect the presence of cracks, discover the yield curve of the fasteners and their the crushing limits for failure prediction are tools used to verify this proposal. They demonstrate, at the end of study, the inefficiency of this procedure, with results that go against the safe fixing of parts in a structureNeste trabalho abordam-se os principais tipos de rebites, suas características e aplicabilidade dentro do ramo da Indústria Aeronáutica. Ressaltam-se os rebites sólidos, exibindo-se seu layout, formas e limites de instalação, requeridos pelos órgãos regulamentadores da aviação. O rebitamento é um procedimento popular e simples de fixação e união de duas ou mais peças, e como qualquer outro processo de manufatura, está sujeito a desvios de processo que em algumas situações fogem até mesmo dos limites de tolerância. Um destes desvios é a furação cujo diâmetro ultrapassa aquele proposto no projeto e que é limitado pela regra da distância de borda. Dessa forma, tem-se como objetivo aqui estudar uma possível solução para este problema: a cravação de um rebite que tenha seu diâmetro previamente aumentado através de compressão. Observar o preenchimento do furo após a cravação, detectar a presença de trincas, levantar a curva de escoamento dos fixadores e seus limites de esmagamento para previsão de falhas são ferramentas utilizadas na verificação desta proposta. São elas que ao final do estudo demonstram a ineficiência de tal procedimento, apresentando características que vão contra a fixação segura das partes de uma estruturaUniversidade Estadual Paulista (Unesp)Martins, Marcelo Sampaio [UNESP]Universidade Estadual Paulista (Unesp)Gonçalves, Marcelo Ribeiro [UNESP]2015-05-14T16:52:29Z2015-05-14T16:52:29Z2015-02-02info:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/bachelorThesis68 f.application/pdfGONÇALVES, Marcelo Ribeiro. Estudo do aumento no diâmetro do corpo de um rebite a ser cravado em furos acima da tolerância de projeto. 2015. 68 f. Trabalho de conclusão de curso (Bacharelado - Engenharia Mecânica) - Universidade Estadual Paulista, Faculdade de Engenharia de Guaratinguetá, 2015.http://hdl.handle.net/11449/123068000823334http://www.athena.biblioteca.unesp.br/exlibris/bd/capelo/2015-05-06/000823334.pdf2065406016830791Alephreponame:Repositório Institucional da UNESPinstname:Universidade Estadual Paulista (UNESP)instacron:UNESPporinfo:eu-repo/semantics/openAccess2024-07-02T17:51:40Zoai:repositorio.unesp.br:11449/123068Repositório InstitucionalPUBhttp://repositorio.unesp.br/oai/requestopendoar:29462024-07-02T17:51:40Repositório Institucional da UNESP - Universidade Estadual Paulista (UNESP)false |
dc.title.none.fl_str_mv |
Estudo do aumento no diâmetro do corpo de um rebite a ser cravado em furos acima da tolerância de projeto |
title |
Estudo do aumento no diâmetro do corpo de um rebite a ser cravado em furos acima da tolerância de projeto |
spellingShingle |
Estudo do aumento no diâmetro do corpo de um rebite a ser cravado em furos acima da tolerância de projeto Gonçalves, Marcelo Ribeiro [UNESP] Ligações rebitadas Tolerancia (Engenharia) Escoamento Riveted joints |
title_short |
Estudo do aumento no diâmetro do corpo de um rebite a ser cravado em furos acima da tolerância de projeto |
title_full |
Estudo do aumento no diâmetro do corpo de um rebite a ser cravado em furos acima da tolerância de projeto |
title_fullStr |
Estudo do aumento no diâmetro do corpo de um rebite a ser cravado em furos acima da tolerância de projeto |
title_full_unstemmed |
Estudo do aumento no diâmetro do corpo de um rebite a ser cravado em furos acima da tolerância de projeto |
title_sort |
Estudo do aumento no diâmetro do corpo de um rebite a ser cravado em furos acima da tolerância de projeto |
author |
Gonçalves, Marcelo Ribeiro [UNESP] |
author_facet |
Gonçalves, Marcelo Ribeiro [UNESP] |
author_role |
author |
dc.contributor.none.fl_str_mv |
Martins, Marcelo Sampaio [UNESP] Universidade Estadual Paulista (Unesp) |
dc.contributor.author.fl_str_mv |
Gonçalves, Marcelo Ribeiro [UNESP] |
dc.subject.por.fl_str_mv |
Ligações rebitadas Tolerancia (Engenharia) Escoamento Riveted joints |
topic |
Ligações rebitadas Tolerancia (Engenharia) Escoamento Riveted joints |
description |
In this work are discussed the main types of rivets, their characteristics and applicability within the Aeronautical Industry branch. Here are highlighted the solid rivets, showing off its layout, forms and limits of installation, that are required by aviation regulators. The riveting is a popular and simple procedure of fixing and joining two or more parts, and like any other manufacturing process is subject to process deviations that in some situations are beyond the limits of tolerance. One of these deviations is when the hole diameter exceeds the one proposed in project and which is limited by the rule of edge distance. The overall objective here is to study a possible solution to this problem: the installation of a rivet that has his diameter previously increased by compression. Observe the hole filling after riveting, detect the presence of cracks, discover the yield curve of the fasteners and their the crushing limits for failure prediction are tools used to verify this proposal. They demonstrate, at the end of study, the inefficiency of this procedure, with results that go against the safe fixing of parts in a structure |
publishDate |
2015 |
dc.date.none.fl_str_mv |
2015-05-14T16:52:29Z 2015-05-14T16:52:29Z 2015-02-02 |
dc.type.status.fl_str_mv |
info:eu-repo/semantics/publishedVersion |
dc.type.driver.fl_str_mv |
info:eu-repo/semantics/bachelorThesis |
format |
bachelorThesis |
status_str |
publishedVersion |
dc.identifier.uri.fl_str_mv |
GONÇALVES, Marcelo Ribeiro. Estudo do aumento no diâmetro do corpo de um rebite a ser cravado em furos acima da tolerância de projeto. 2015. 68 f. Trabalho de conclusão de curso (Bacharelado - Engenharia Mecânica) - Universidade Estadual Paulista, Faculdade de Engenharia de Guaratinguetá, 2015. http://hdl.handle.net/11449/123068 000823334 http://www.athena.biblioteca.unesp.br/exlibris/bd/capelo/2015-05-06/000823334.pdf 2065406016830791 |
identifier_str_mv |
GONÇALVES, Marcelo Ribeiro. Estudo do aumento no diâmetro do corpo de um rebite a ser cravado em furos acima da tolerância de projeto. 2015. 68 f. Trabalho de conclusão de curso (Bacharelado - Engenharia Mecânica) - Universidade Estadual Paulista, Faculdade de Engenharia de Guaratinguetá, 2015. 000823334 2065406016830791 |
url |
http://hdl.handle.net/11449/123068 http://www.athena.biblioteca.unesp.br/exlibris/bd/capelo/2015-05-06/000823334.pdf |
dc.language.iso.fl_str_mv |
por |
language |
por |
dc.rights.driver.fl_str_mv |
info:eu-repo/semantics/openAccess |
eu_rights_str_mv |
openAccess |
dc.format.none.fl_str_mv |
68 f. application/pdf |
dc.publisher.none.fl_str_mv |
Universidade Estadual Paulista (Unesp) |
publisher.none.fl_str_mv |
Universidade Estadual Paulista (Unesp) |
dc.source.none.fl_str_mv |
Aleph reponame:Repositório Institucional da UNESP instname:Universidade Estadual Paulista (UNESP) instacron:UNESP |
instname_str |
Universidade Estadual Paulista (UNESP) |
instacron_str |
UNESP |
institution |
UNESP |
reponame_str |
Repositório Institucional da UNESP |
collection |
Repositório Institucional da UNESP |
repository.name.fl_str_mv |
Repositório Institucional da UNESP - Universidade Estadual Paulista (UNESP) |
repository.mail.fl_str_mv |
|
_version_ |
1803649522472058880 |