Silver nanoparticles added to a commercial adhesive primer: Colour change and resin colour stability with ageing
Autor(a) principal: | |
---|---|
Data de Publicação: | 2020 |
Outros Autores: | , , , , , |
Tipo de documento: | Artigo |
Idioma: | eng |
Título da fonte: | Repositório Institucional da UNESP |
Texto Completo: | http://dx.doi.org/10.1016/j.ijadhadh.2020.102694 http://hdl.handle.net/11449/201986 |
Resumo: | This study evaluated the influence of silver nanoparticles (NAg) incorporated into the primer of a three-step adhesive system (Scotch-Bond Multi-purpose) over the composite-resin colour (CIELab and CIEDE 2000) as a function of the concentration and ageing methods. Ninety specimens were prepared and distributed into 6 groups (n = 15), according to the NAg concentration: NAg 0 (0 wt%); NAg 50 (0.005 wt%); NAg 100 (0.010 wt%); NAg 150 (0.015 wt%); NAg 200 (0.020 wt%); NAg 250 (0.025 wt%). Initial colour readings were performed to evaluate colour change (CC) after NAg addition to primers. Readings after 30 days of storage in water (30D), thermocycling (TC), and accelerated artificial ageing (AAA) were performed to verify the influence of each method over CC. Data was calculated according to CIELab and CIEDE 2000 systems and analysed with one-way and two-way ANOVA (p ≤ 0.05), complemented with post-hoc Tukey test. Data presented normality, homoscedasticity, and statistical difference. ΔEs gradually increased according to the percentage of added NAg into the primer. Thermocycling and UV light exposure induced a higher colour change when compared to water ageing (D30). Significant statistical difference was found for all ageing methods. CIEDE 2000 and CIELab are similar methods of colour evaluation. Besides, primers with up to 0.025 wt% applied in cavities deeper than 1 mm were colour-safe and did not jeopardise the aesthetic perception of the simulated restoration. |
id |
UNSP_b54919798fea0a05b69ad749e8f6ad73 |
---|---|
oai_identifier_str |
oai:repositorio.unesp.br:11449/201986 |
network_acronym_str |
UNSP |
network_name_str |
Repositório Institucional da UNESP |
repository_id_str |
2946 |
spelling |
Silver nanoparticles added to a commercial adhesive primer: Colour change and resin colour stability with ageingAgeingAntibacterial adhesivesColour changeSilver nanoparticlesThis study evaluated the influence of silver nanoparticles (NAg) incorporated into the primer of a three-step adhesive system (Scotch-Bond Multi-purpose) over the composite-resin colour (CIELab and CIEDE 2000) as a function of the concentration and ageing methods. Ninety specimens were prepared and distributed into 6 groups (n = 15), according to the NAg concentration: NAg 0 (0 wt%); NAg 50 (0.005 wt%); NAg 100 (0.010 wt%); NAg 150 (0.015 wt%); NAg 200 (0.020 wt%); NAg 250 (0.025 wt%). Initial colour readings were performed to evaluate colour change (CC) after NAg addition to primers. Readings after 30 days of storage in water (30D), thermocycling (TC), and accelerated artificial ageing (AAA) were performed to verify the influence of each method over CC. Data was calculated according to CIELab and CIEDE 2000 systems and analysed with one-way and two-way ANOVA (p ≤ 0.05), complemented with post-hoc Tukey test. Data presented normality, homoscedasticity, and statistical difference. ΔEs gradually increased according to the percentage of added NAg into the primer. Thermocycling and UV light exposure induced a higher colour change when compared to water ageing (D30). Significant statistical difference was found for all ageing methods. CIEDE 2000 and CIELab are similar methods of colour evaluation. Besides, primers with up to 0.025 wt% applied in cavities deeper than 1 mm were colour-safe and did not jeopardise the aesthetic perception of the simulated restoration.Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)Laboratório Nacional de NanotecnologiaDepartment of Operative Dentistry Postgraduate Program in Dentistry Universidade Paulista – UNIP, Rua Doutor Bacelar, 1212, MirandópolisDepartment of Fundamental Chemistry Institute of Chemistry University of São Paulo (USP), Av. Lineu Prestes, 748, ButantãDepartment of Restorative Dentistry School of Dentistry São Paulo State University (ICT-UNESP) Institute of Science and Technology, Av. Engenheiro Francisco José Longo, 777, Jardim São DimasDepartment of Biomaterials and Oral Biology School of Dentistry University of São Paulo (USP), Av. Lineu Prestes, 2227, ButantãDepartment of Restorative Dentistry School of Dentistry São Paulo State University (ICT-UNESP) Institute of Science and Technology, Av. Engenheiro Francisco José Longo, 777, Jardim São DimasFAPESP: 201818/21489-1CNPq: 303137/2016-9CNPq: 305950/2016-9CNPq: 401581/2016-0Laboratório Nacional de Nanotecnologia: TEM-21785Universidade Paulista – UNIPUniversidade de São Paulo (USP)Universidade Estadual Paulista (Unesp)Štruncová, MarinaToma, Sérgio HiroshiAraki, KoitiBresciani, Eduardo [UNESP]Rodrigues, Flávia PiresMedeiros, Igor StudartDutra-Correa, Maristela2020-12-12T02:46:55Z2020-12-12T02:46:55Z2020-10-01info:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/articlehttp://dx.doi.org/10.1016/j.ijadhadh.2020.102694International Journal of Adhesion and Adhesives, v. 102.0143-7496http://hdl.handle.net/11449/20198610.1016/j.ijadhadh.2020.1026942-s2.0-85088922011Scopusreponame:Repositório Institucional da UNESPinstname:Universidade Estadual Paulista (UNESP)instacron:UNESPengInternational Journal of Adhesion and Adhesivesinfo:eu-repo/semantics/openAccess2021-10-23T04:16:25Zoai:repositorio.unesp.br:11449/201986Repositório InstitucionalPUBhttp://repositorio.unesp.br/oai/requestopendoar:29462024-08-05T16:58:00.231828Repositório Institucional da UNESP - Universidade Estadual Paulista (UNESP)false |
dc.title.none.fl_str_mv |
Silver nanoparticles added to a commercial adhesive primer: Colour change and resin colour stability with ageing |
title |
Silver nanoparticles added to a commercial adhesive primer: Colour change and resin colour stability with ageing |
spellingShingle |
Silver nanoparticles added to a commercial adhesive primer: Colour change and resin colour stability with ageing Štruncová, Marina Ageing Antibacterial adhesives Colour change Silver nanoparticles |
title_short |
Silver nanoparticles added to a commercial adhesive primer: Colour change and resin colour stability with ageing |
title_full |
Silver nanoparticles added to a commercial adhesive primer: Colour change and resin colour stability with ageing |
title_fullStr |
Silver nanoparticles added to a commercial adhesive primer: Colour change and resin colour stability with ageing |
title_full_unstemmed |
Silver nanoparticles added to a commercial adhesive primer: Colour change and resin colour stability with ageing |
title_sort |
Silver nanoparticles added to a commercial adhesive primer: Colour change and resin colour stability with ageing |
author |
Štruncová, Marina |
author_facet |
Štruncová, Marina Toma, Sérgio Hiroshi Araki, Koiti Bresciani, Eduardo [UNESP] Rodrigues, Flávia Pires Medeiros, Igor Studart Dutra-Correa, Maristela |
author_role |
author |
author2 |
Toma, Sérgio Hiroshi Araki, Koiti Bresciani, Eduardo [UNESP] Rodrigues, Flávia Pires Medeiros, Igor Studart Dutra-Correa, Maristela |
author2_role |
author author author author author author |
dc.contributor.none.fl_str_mv |
Universidade Paulista – UNIP Universidade de São Paulo (USP) Universidade Estadual Paulista (Unesp) |
dc.contributor.author.fl_str_mv |
Štruncová, Marina Toma, Sérgio Hiroshi Araki, Koiti Bresciani, Eduardo [UNESP] Rodrigues, Flávia Pires Medeiros, Igor Studart Dutra-Correa, Maristela |
dc.subject.por.fl_str_mv |
Ageing Antibacterial adhesives Colour change Silver nanoparticles |
topic |
Ageing Antibacterial adhesives Colour change Silver nanoparticles |
description |
This study evaluated the influence of silver nanoparticles (NAg) incorporated into the primer of a three-step adhesive system (Scotch-Bond Multi-purpose) over the composite-resin colour (CIELab and CIEDE 2000) as a function of the concentration and ageing methods. Ninety specimens were prepared and distributed into 6 groups (n = 15), according to the NAg concentration: NAg 0 (0 wt%); NAg 50 (0.005 wt%); NAg 100 (0.010 wt%); NAg 150 (0.015 wt%); NAg 200 (0.020 wt%); NAg 250 (0.025 wt%). Initial colour readings were performed to evaluate colour change (CC) after NAg addition to primers. Readings after 30 days of storage in water (30D), thermocycling (TC), and accelerated artificial ageing (AAA) were performed to verify the influence of each method over CC. Data was calculated according to CIELab and CIEDE 2000 systems and analysed with one-way and two-way ANOVA (p ≤ 0.05), complemented with post-hoc Tukey test. Data presented normality, homoscedasticity, and statistical difference. ΔEs gradually increased according to the percentage of added NAg into the primer. Thermocycling and UV light exposure induced a higher colour change when compared to water ageing (D30). Significant statistical difference was found for all ageing methods. CIEDE 2000 and CIELab are similar methods of colour evaluation. Besides, primers with up to 0.025 wt% applied in cavities deeper than 1 mm were colour-safe and did not jeopardise the aesthetic perception of the simulated restoration. |
publishDate |
2020 |
dc.date.none.fl_str_mv |
2020-12-12T02:46:55Z 2020-12-12T02:46:55Z 2020-10-01 |
dc.type.status.fl_str_mv |
info:eu-repo/semantics/publishedVersion |
dc.type.driver.fl_str_mv |
info:eu-repo/semantics/article |
format |
article |
status_str |
publishedVersion |
dc.identifier.uri.fl_str_mv |
http://dx.doi.org/10.1016/j.ijadhadh.2020.102694 International Journal of Adhesion and Adhesives, v. 102. 0143-7496 http://hdl.handle.net/11449/201986 10.1016/j.ijadhadh.2020.102694 2-s2.0-85088922011 |
url |
http://dx.doi.org/10.1016/j.ijadhadh.2020.102694 http://hdl.handle.net/11449/201986 |
identifier_str_mv |
International Journal of Adhesion and Adhesives, v. 102. 0143-7496 10.1016/j.ijadhadh.2020.102694 2-s2.0-85088922011 |
dc.language.iso.fl_str_mv |
eng |
language |
eng |
dc.relation.none.fl_str_mv |
International Journal of Adhesion and Adhesives |
dc.rights.driver.fl_str_mv |
info:eu-repo/semantics/openAccess |
eu_rights_str_mv |
openAccess |
dc.source.none.fl_str_mv |
Scopus reponame:Repositório Institucional da UNESP instname:Universidade Estadual Paulista (UNESP) instacron:UNESP |
instname_str |
Universidade Estadual Paulista (UNESP) |
instacron_str |
UNESP |
institution |
UNESP |
reponame_str |
Repositório Institucional da UNESP |
collection |
Repositório Institucional da UNESP |
repository.name.fl_str_mv |
Repositório Institucional da UNESP - Universidade Estadual Paulista (UNESP) |
repository.mail.fl_str_mv |
|
_version_ |
1808128726820454400 |