Springback analysis of thin bent sheets on elastomeric die

Detalhes bibliográficos
Autor(a) principal: Braga, M. T.
Data de Publicação: 2010
Outros Autores: Filho, L. A. Moreira, Menezes, M. A.
Tipo de documento: Artigo
Idioma: eng
Título da fonte: Repositório Institucional da UNESP
Texto Completo: http://dx.doi.org/10.1007/s12289-010-0957-z
http://hdl.handle.net/11449/231251
Resumo: One critical problem of sheet formed products is its dimensional accuracy. This is related to springback (elastic recovery), after forming load releasing. It may happen in any forming process; however, it is easier noted and quantified in bending process. Needless to say that this problem is undesirable since it affects assemblies, mainly at aeronautics industry [1]. Although, literature provides some models for predicting springback in conventional bending, this is not the case for non conventional bending using polyurethanic die and that's why the process has been treated on trial and error basis at shop, implying in product discharge. So, this work intends to present a theoretical model for predicting springback. Model validation has been done by experimental results. Predicted values are in a good agreement with these latter. © 2010 Springer-Verlag France.
id UNSP_b6ade0cf79ea9f1e234cf60f57b661bb
oai_identifier_str oai:repositorio.unesp.br:11449/231251
network_acronym_str UNSP
network_name_str Repositório Institucional da UNESP
repository_id_str 2946
spelling Springback analysis of thin bent sheets on elastomeric dieNon conventional bending processSheet metal formed by bending processSpringbackOne critical problem of sheet formed products is its dimensional accuracy. This is related to springback (elastic recovery), after forming load releasing. It may happen in any forming process; however, it is easier noted and quantified in bending process. Needless to say that this problem is undesirable since it affects assemblies, mainly at aeronautics industry [1]. Although, literature provides some models for predicting springback in conventional bending, this is not the case for non conventional bending using polyurethanic die and that's why the process has been treated on trial and error basis at shop, implying in product discharge. So, this work intends to present a theoretical model for predicting springback. Model validation has been done by experimental results. Predicted values are in a good agreement with these latter. © 2010 Springer-Verlag France.Technological Institute of Aeronautics Mechanical DepartmentUniversity of São Paulo State at Ilha Solteira Mechanical DepartmentMechanical DepartmentUniversidade de São Paulo (USP)Braga, M. T.Filho, L. A. MoreiraMenezes, M. A.2022-04-29T08:44:21Z2022-04-29T08:44:21Z2010-04-01info:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/article1075-1078http://dx.doi.org/10.1007/s12289-010-0957-zInternational Journal of Material Forming, v. 3, n. SUPPL. 1, p. 1075-1078, 2010.1960-62061960-6214http://hdl.handle.net/11449/23125110.1007/s12289-010-0957-z2-s2.0-78651574163Scopusreponame:Repositório Institucional da UNESPinstname:Universidade Estadual Paulista (UNESP)instacron:UNESPengInternational Journal of Material Forminginfo:eu-repo/semantics/openAccess2024-07-04T20:06:15Zoai:repositorio.unesp.br:11449/231251Repositório InstitucionalPUBhttp://repositorio.unesp.br/oai/requestopendoar:29462024-08-05T19:24:27.867326Repositório Institucional da UNESP - Universidade Estadual Paulista (UNESP)false
dc.title.none.fl_str_mv Springback analysis of thin bent sheets on elastomeric die
title Springback analysis of thin bent sheets on elastomeric die
spellingShingle Springback analysis of thin bent sheets on elastomeric die
Braga, M. T.
Non conventional bending process
Sheet metal formed by bending process
Springback
title_short Springback analysis of thin bent sheets on elastomeric die
title_full Springback analysis of thin bent sheets on elastomeric die
title_fullStr Springback analysis of thin bent sheets on elastomeric die
title_full_unstemmed Springback analysis of thin bent sheets on elastomeric die
title_sort Springback analysis of thin bent sheets on elastomeric die
author Braga, M. T.
author_facet Braga, M. T.
Filho, L. A. Moreira
Menezes, M. A.
author_role author
author2 Filho, L. A. Moreira
Menezes, M. A.
author2_role author
author
dc.contributor.none.fl_str_mv Mechanical Department
Universidade de São Paulo (USP)
dc.contributor.author.fl_str_mv Braga, M. T.
Filho, L. A. Moreira
Menezes, M. A.
dc.subject.por.fl_str_mv Non conventional bending process
Sheet metal formed by bending process
Springback
topic Non conventional bending process
Sheet metal formed by bending process
Springback
description One critical problem of sheet formed products is its dimensional accuracy. This is related to springback (elastic recovery), after forming load releasing. It may happen in any forming process; however, it is easier noted and quantified in bending process. Needless to say that this problem is undesirable since it affects assemblies, mainly at aeronautics industry [1]. Although, literature provides some models for predicting springback in conventional bending, this is not the case for non conventional bending using polyurethanic die and that's why the process has been treated on trial and error basis at shop, implying in product discharge. So, this work intends to present a theoretical model for predicting springback. Model validation has been done by experimental results. Predicted values are in a good agreement with these latter. © 2010 Springer-Verlag France.
publishDate 2010
dc.date.none.fl_str_mv 2010-04-01
2022-04-29T08:44:21Z
2022-04-29T08:44:21Z
dc.type.status.fl_str_mv info:eu-repo/semantics/publishedVersion
dc.type.driver.fl_str_mv info:eu-repo/semantics/article
format article
status_str publishedVersion
dc.identifier.uri.fl_str_mv http://dx.doi.org/10.1007/s12289-010-0957-z
International Journal of Material Forming, v. 3, n. SUPPL. 1, p. 1075-1078, 2010.
1960-6206
1960-6214
http://hdl.handle.net/11449/231251
10.1007/s12289-010-0957-z
2-s2.0-78651574163
url http://dx.doi.org/10.1007/s12289-010-0957-z
http://hdl.handle.net/11449/231251
identifier_str_mv International Journal of Material Forming, v. 3, n. SUPPL. 1, p. 1075-1078, 2010.
1960-6206
1960-6214
10.1007/s12289-010-0957-z
2-s2.0-78651574163
dc.language.iso.fl_str_mv eng
language eng
dc.relation.none.fl_str_mv International Journal of Material Forming
dc.rights.driver.fl_str_mv info:eu-repo/semantics/openAccess
eu_rights_str_mv openAccess
dc.format.none.fl_str_mv 1075-1078
dc.source.none.fl_str_mv Scopus
reponame:Repositório Institucional da UNESP
instname:Universidade Estadual Paulista (UNESP)
instacron:UNESP
instname_str Universidade Estadual Paulista (UNESP)
instacron_str UNESP
institution UNESP
reponame_str Repositório Institucional da UNESP
collection Repositório Institucional da UNESP
repository.name.fl_str_mv Repositório Institucional da UNESP - Universidade Estadual Paulista (UNESP)
repository.mail.fl_str_mv
_version_ 1808129063964901376

Registros relacionados