Avanços no torneamento utilizando um porta-ferramentas refrigerado internamente com fluido em mudança de fase
Autor(a) principal: | |
---|---|
Data de Publicação: | 2014 |
Tipo de documento: | Dissertação |
Idioma: | por |
Título da fonte: | Repositório Institucional da UNESP |
Texto Completo: | http://hdl.handle.net/11449/110927 |
Resumo: | The use of cutting fluid are generally considered a solution for the increase of productivity, reducing the cutting tool wear. However, the costs of the system, maintenance and disposal of the fluid, besides the damage to health and to the environment, make necessary the development of a sustainable technological evolution. Sme alternatives such as cryogenic machinig, the use of minimum quantity of lubrificant or even the dry cutting have been studied, but the performance of these methods is restricted to specific conditions. This work presents the conception, development and analysis of an environmental ly friendly method of cooling without health hazards, with integration, into several equipments, without changing the structure of the cutting tools and equally or even more efficient than the application of cutting fluid. A toolholder was desined with an internal cooling circuit in which cooling fluid R141-b flows and evaporates when removing the heat from the cutting tool, and then condensed, creating a closed circuit without release to the atmosphere. The results of using the proposed system were compared to conventional application of cutting fluid and dry cutting in turning of AISI 1045, using uncoated carbide, cutting tools, as well as in the turning of difficult to cut austenitic steel SAE XEC-F, using coated cutting tools. The tests indicated that the proposed system provided a tool life similar to cutting fluid application, suggesting that the reduction in temperature of the cutting tool was able to attenuate the wear mechanisms and the changes in hardness and toughness of the comented carbide. During the turning of stainless steel, the cutting fluid led to cooling and lubrification, exceeding the conceived method, since the low thermal conductivity and high abrasion are common when machining this material |
id |
UNSP_c348e0485e6f0a7a651bc80a3c574894 |
---|---|
oai_identifier_str |
oai:repositorio.unesp.br:11449/110927 |
network_acronym_str |
UNSP |
network_name_str |
Repositório Institucional da UNESP |
repository_id_str |
2946 |
spelling |
Avanços no torneamento utilizando um porta-ferramentas refrigerado internamente com fluido em mudança de faseFluidos de corteRefrigeraçãoFerramentasDesgaste mecanicoCutting lubricantsThe use of cutting fluid are generally considered a solution for the increase of productivity, reducing the cutting tool wear. However, the costs of the system, maintenance and disposal of the fluid, besides the damage to health and to the environment, make necessary the development of a sustainable technological evolution. Sme alternatives such as cryogenic machinig, the use of minimum quantity of lubrificant or even the dry cutting have been studied, but the performance of these methods is restricted to specific conditions. This work presents the conception, development and analysis of an environmental ly friendly method of cooling without health hazards, with integration, into several equipments, without changing the structure of the cutting tools and equally or even more efficient than the application of cutting fluid. A toolholder was desined with an internal cooling circuit in which cooling fluid R141-b flows and evaporates when removing the heat from the cutting tool, and then condensed, creating a closed circuit without release to the atmosphere. The results of using the proposed system were compared to conventional application of cutting fluid and dry cutting in turning of AISI 1045, using uncoated carbide, cutting tools, as well as in the turning of difficult to cut austenitic steel SAE XEC-F, using coated cutting tools. The tests indicated that the proposed system provided a tool life similar to cutting fluid application, suggesting that the reduction in temperature of the cutting tool was able to attenuate the wear mechanisms and the changes in hardness and toughness of the comented carbide. During the turning of stainless steel, the cutting fluid led to cooling and lubrification, exceeding the conceived method, since the low thermal conductivity and high abrasion are common when machining this materialA utilização de fluido de corte geralmente é considerada uma solução para o aumento da produtividade por atuar na redução do desgaste da ferramenta. Contudo, os custos do sistema, manutenção, descarte e os danos à saúde e ao meio ambiente demandam uma evolução tecnológica sustentável. Alguns métodos de refrigeração, como a usinagem criogênica, o uso da mínima quantidade de lubrificante ou mesmo o corte a seco têm sido estudados, mas o desempenho destes métodos é restrito a condições específicas de usinagem. Esta pesquisa trata da concepção, do desenvolvimento e da análise de um método de um método de refrigeração ambientalmente correto, sem prejuízos à saúde, de simples integração em diversos equipamentos, sem alterar a estrutura das ferramentas de corte e tão ou mais eficiente que a aplicação de fluido de corte. Um porta-ferramentas foi adaptado com um canal interno de refrigeração por onde o refrigerante R141-b fluia e evaparava ao remover calor da ferramenta durante o torneamento, sendo em seguida condensado sem liberação para a atmosfera, criando um circuito fechado. Os resultados do método proposto foram comparados à aplicação convencional de fluído de corte e ao corte a seco no torneamento de aço ABNT 1045, utilizando ferramenta de corte de metal duro sem revestimento, bem como no torneamento do aço austenítico de difícil usinabilidade SAE XEV-F, utilizando-se ferramentas revistidas. Os testes mostraram que o novo sistema proporcionou vidas de ferramentas similares ou superiores às obtidas com fluido de corte e superiores ao corte a seco, sugerindo que a redução na temperatura da ferramenta foi capaz de atenuar os mecanismos de desgaste e as alterações na dureza e resistência do metal duro. No torneamento do aço inoxidável o fluído de corte propiciou a refrigeração e lubrificação do processo, superando o método concebido, já que a baixa condutividade térmica e desgaste...Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)Universidade Estadual Paulista (Unesp)Sanchez, Luiz Eduardo de Angelo [UNESP]Universidade Estadual Paulista (Unesp)Ingraci Neto, Rubens Roberto [UNESP]2014-12-02T11:16:45Z2014-12-02T11:16:45Z2014-01-30info:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/masterThesis174 f. : il.application/pdfINGRACI NETO, Rubens Roberto. Avanços no torneamento utilizando um porta-ferramentas refrigerado internamente com fluido em mudança de fase. 2014. 174 f. Dissertação (mestrado) - Universidade Estadual Paulista Julio de Mesquita Filho, Faculdade de Engenharia, 2014.http://hdl.handle.net/11449/110927000750012000750012.pdf33004056080P87748171642151206Alephreponame:Repositório Institucional da UNESPinstname:Universidade Estadual Paulista (UNESP)instacron:UNESPporinfo:eu-repo/semantics/openAccess2024-06-28T19:30:34Zoai:repositorio.unesp.br:11449/110927Repositório InstitucionalPUBhttp://repositorio.unesp.br/oai/requestopendoar:29462024-08-05T18:19:24.657932Repositório Institucional da UNESP - Universidade Estadual Paulista (UNESP)false |
dc.title.none.fl_str_mv |
Avanços no torneamento utilizando um porta-ferramentas refrigerado internamente com fluido em mudança de fase |
title |
Avanços no torneamento utilizando um porta-ferramentas refrigerado internamente com fluido em mudança de fase |
spellingShingle |
Avanços no torneamento utilizando um porta-ferramentas refrigerado internamente com fluido em mudança de fase Ingraci Neto, Rubens Roberto [UNESP] Fluidos de corte Refrigeração Ferramentas Desgaste mecanico Cutting lubricants |
title_short |
Avanços no torneamento utilizando um porta-ferramentas refrigerado internamente com fluido em mudança de fase |
title_full |
Avanços no torneamento utilizando um porta-ferramentas refrigerado internamente com fluido em mudança de fase |
title_fullStr |
Avanços no torneamento utilizando um porta-ferramentas refrigerado internamente com fluido em mudança de fase |
title_full_unstemmed |
Avanços no torneamento utilizando um porta-ferramentas refrigerado internamente com fluido em mudança de fase |
title_sort |
Avanços no torneamento utilizando um porta-ferramentas refrigerado internamente com fluido em mudança de fase |
author |
Ingraci Neto, Rubens Roberto [UNESP] |
author_facet |
Ingraci Neto, Rubens Roberto [UNESP] |
author_role |
author |
dc.contributor.none.fl_str_mv |
Sanchez, Luiz Eduardo de Angelo [UNESP] Universidade Estadual Paulista (Unesp) |
dc.contributor.author.fl_str_mv |
Ingraci Neto, Rubens Roberto [UNESP] |
dc.subject.por.fl_str_mv |
Fluidos de corte Refrigeração Ferramentas Desgaste mecanico Cutting lubricants |
topic |
Fluidos de corte Refrigeração Ferramentas Desgaste mecanico Cutting lubricants |
description |
The use of cutting fluid are generally considered a solution for the increase of productivity, reducing the cutting tool wear. However, the costs of the system, maintenance and disposal of the fluid, besides the damage to health and to the environment, make necessary the development of a sustainable technological evolution. Sme alternatives such as cryogenic machinig, the use of minimum quantity of lubrificant or even the dry cutting have been studied, but the performance of these methods is restricted to specific conditions. This work presents the conception, development and analysis of an environmental ly friendly method of cooling without health hazards, with integration, into several equipments, without changing the structure of the cutting tools and equally or even more efficient than the application of cutting fluid. A toolholder was desined with an internal cooling circuit in which cooling fluid R141-b flows and evaporates when removing the heat from the cutting tool, and then condensed, creating a closed circuit without release to the atmosphere. The results of using the proposed system were compared to conventional application of cutting fluid and dry cutting in turning of AISI 1045, using uncoated carbide, cutting tools, as well as in the turning of difficult to cut austenitic steel SAE XEC-F, using coated cutting tools. The tests indicated that the proposed system provided a tool life similar to cutting fluid application, suggesting that the reduction in temperature of the cutting tool was able to attenuate the wear mechanisms and the changes in hardness and toughness of the comented carbide. During the turning of stainless steel, the cutting fluid led to cooling and lubrification, exceeding the conceived method, since the low thermal conductivity and high abrasion are common when machining this material |
publishDate |
2014 |
dc.date.none.fl_str_mv |
2014-12-02T11:16:45Z 2014-12-02T11:16:45Z 2014-01-30 |
dc.type.status.fl_str_mv |
info:eu-repo/semantics/publishedVersion |
dc.type.driver.fl_str_mv |
info:eu-repo/semantics/masterThesis |
format |
masterThesis |
status_str |
publishedVersion |
dc.identifier.uri.fl_str_mv |
INGRACI NETO, Rubens Roberto. Avanços no torneamento utilizando um porta-ferramentas refrigerado internamente com fluido em mudança de fase. 2014. 174 f. Dissertação (mestrado) - Universidade Estadual Paulista Julio de Mesquita Filho, Faculdade de Engenharia, 2014. http://hdl.handle.net/11449/110927 000750012 000750012.pdf 33004056080P8 7748171642151206 |
identifier_str_mv |
INGRACI NETO, Rubens Roberto. Avanços no torneamento utilizando um porta-ferramentas refrigerado internamente com fluido em mudança de fase. 2014. 174 f. Dissertação (mestrado) - Universidade Estadual Paulista Julio de Mesquita Filho, Faculdade de Engenharia, 2014. 000750012 000750012.pdf 33004056080P8 7748171642151206 |
url |
http://hdl.handle.net/11449/110927 |
dc.language.iso.fl_str_mv |
por |
language |
por |
dc.rights.driver.fl_str_mv |
info:eu-repo/semantics/openAccess |
eu_rights_str_mv |
openAccess |
dc.format.none.fl_str_mv |
174 f. : il. application/pdf |
dc.publisher.none.fl_str_mv |
Universidade Estadual Paulista (Unesp) |
publisher.none.fl_str_mv |
Universidade Estadual Paulista (Unesp) |
dc.source.none.fl_str_mv |
Aleph reponame:Repositório Institucional da UNESP instname:Universidade Estadual Paulista (UNESP) instacron:UNESP |
instname_str |
Universidade Estadual Paulista (UNESP) |
instacron_str |
UNESP |
institution |
UNESP |
reponame_str |
Repositório Institucional da UNESP |
collection |
Repositório Institucional da UNESP |
repository.name.fl_str_mv |
Repositório Institucional da UNESP - Universidade Estadual Paulista (UNESP) |
repository.mail.fl_str_mv |
|
_version_ |
1808128919454351360 |