Development of Ti–Al–V alloys for usage as single-axis knee prostheses: evaluation of mechanical, corrosion, and tribocorrosion behaviors
Autor(a) principal: | |
---|---|
Data de Publicação: | 2023 |
Outros Autores: | , , , , , , , |
Tipo de documento: | Artigo |
Idioma: | eng |
Título da fonte: | Repositório Institucional da UNESP |
Texto Completo: | http://dx.doi.org/10.1038/s41598-023-31548-1 http://hdl.handle.net/11449/249775 |
Resumo: | Single-axis knee prosthesis is an artificial biomechanical device that provides motion to amputees without the need for assistance appliances. Besides it is mainly composed of metallic materials, the current commercial materials did not group adequate properties for long-term usage or accessible cost. This study produced and characterized Ti-(10 −x)Al-xV (x = 0, 2, and 4 wt.%) alloys for potential use as single-axis knee prostheses. The samples exhibited a gradual decrease in the density values, with proper chemical mixing of the alloying elements on the micro-scale. The phase composition exhibited a primary α phase with a minor α′ + β phase for the Ti-8Al-2V and Ti-6Al-4V samples. Due to their different atomic radius compared to Ti, the addition of alloying elements changed the cell parameters. Their selected mechanical properties (Young’s modulus, Vickers microhardness, and damping factor) performed better values than the CP-Ti grade 4. The samples also exhibited good corrosion properties against the simulated marine solution. The tribocorrosion resistance of the samples was better than the reference material, with the wear tracks composed of some tribolayers and grooves resulting from adhesive and abrasive wear. The Ti-10Al alloy displayed the best properties and estimated low cost to be used as single-axis knee prostheses. |
id |
UNSP_d28718085450c48591f08967d4189a65 |
---|---|
oai_identifier_str |
oai:repositorio.unesp.br:11449/249775 |
network_acronym_str |
UNSP |
network_name_str |
Repositório Institucional da UNESP |
repository_id_str |
2946 |
spelling |
Development of Ti–Al–V alloys for usage as single-axis knee prostheses: evaluation of mechanical, corrosion, and tribocorrosion behaviorsSingle-axis knee prosthesis is an artificial biomechanical device that provides motion to amputees without the need for assistance appliances. Besides it is mainly composed of metallic materials, the current commercial materials did not group adequate properties for long-term usage or accessible cost. This study produced and characterized Ti-(10 −x)Al-xV (x = 0, 2, and 4 wt.%) alloys for potential use as single-axis knee prostheses. The samples exhibited a gradual decrease in the density values, with proper chemical mixing of the alloying elements on the micro-scale. The phase composition exhibited a primary α phase with a minor α′ + β phase for the Ti-8Al-2V and Ti-6Al-4V samples. Due to their different atomic radius compared to Ti, the addition of alloying elements changed the cell parameters. Their selected mechanical properties (Young’s modulus, Vickers microhardness, and damping factor) performed better values than the CP-Ti grade 4. The samples also exhibited good corrosion properties against the simulated marine solution. The tribocorrosion resistance of the samples was better than the reference material, with the wear tracks composed of some tribolayers and grooves resulting from adhesive and abrasive wear. The Ti-10Al alloy displayed the best properties and estimated low cost to be used as single-axis knee prostheses.Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)Laboratório de Anelasticidade e Biomateriais São Paulo State University (UNESP) School of Sciences, SPLaboratório de Caraterização Física e Reológica São Paulo State University (UNESP) School of Sciences, SPLaboratório de Nanotecnologia e Materiais Avançados São Paulo State University (UNESP) School of Sciences, SPDepartamento de Química Faculdade de Ciências São Paulo State University (UNESP) School of Sciences, SPLaboratório de Anelasticidade e Biomateriais São Paulo State University (UNESP) School of Sciences, SPLaboratório de Caraterização Física e Reológica São Paulo State University (UNESP) School of Sciences, SPLaboratório de Nanotecnologia e Materiais Avançados São Paulo State University (UNESP) School of Sciences, SPDepartamento de Química Faculdade de Ciências São Paulo State University (UNESP) School of Sciences, SPCAPES: 001/2019-PROPG-CAPES/FAPEAMFAPESP: 13921-3/2021CNPq: 314810/2021-8CNPq: 407251/2018-9Universidade Estadual Paulista (UNESP)Pinto, B. O. [UNESP]Torrento, J. E. [UNESP]Grandini, C. R. [UNESP]Galindo, E. L. [UNESP]Pintão, C. A.F. [UNESP]Santos, A. A. [UNESP]Lisboa-Filho, P. N. [UNESP]Pontes, F. M.L. [UNESP]Correa, D. R.N. [UNESP]2023-07-29T16:08:54Z2023-07-29T16:08:54Z2023-12-01info:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/articlehttp://dx.doi.org/10.1038/s41598-023-31548-1Scientific Reports, v. 13, n. 1, 2023.2045-2322http://hdl.handle.net/11449/24977510.1038/s41598-023-31548-12-s2.0-85150314909Scopusreponame:Repositório Institucional da UNESPinstname:Universidade Estadual Paulista (UNESP)instacron:UNESPengScientific Reportsinfo:eu-repo/semantics/openAccess2024-04-25T17:39:28Zoai:repositorio.unesp.br:11449/249775Repositório InstitucionalPUBhttp://repositorio.unesp.br/oai/requestopendoar:29462024-08-05T15:09:52.824338Repositório Institucional da UNESP - Universidade Estadual Paulista (UNESP)false |
dc.title.none.fl_str_mv |
Development of Ti–Al–V alloys for usage as single-axis knee prostheses: evaluation of mechanical, corrosion, and tribocorrosion behaviors |
title |
Development of Ti–Al–V alloys for usage as single-axis knee prostheses: evaluation of mechanical, corrosion, and tribocorrosion behaviors |
spellingShingle |
Development of Ti–Al–V alloys for usage as single-axis knee prostheses: evaluation of mechanical, corrosion, and tribocorrosion behaviors Pinto, B. O. [UNESP] |
title_short |
Development of Ti–Al–V alloys for usage as single-axis knee prostheses: evaluation of mechanical, corrosion, and tribocorrosion behaviors |
title_full |
Development of Ti–Al–V alloys for usage as single-axis knee prostheses: evaluation of mechanical, corrosion, and tribocorrosion behaviors |
title_fullStr |
Development of Ti–Al–V alloys for usage as single-axis knee prostheses: evaluation of mechanical, corrosion, and tribocorrosion behaviors |
title_full_unstemmed |
Development of Ti–Al–V alloys for usage as single-axis knee prostheses: evaluation of mechanical, corrosion, and tribocorrosion behaviors |
title_sort |
Development of Ti–Al–V alloys for usage as single-axis knee prostheses: evaluation of mechanical, corrosion, and tribocorrosion behaviors |
author |
Pinto, B. O. [UNESP] |
author_facet |
Pinto, B. O. [UNESP] Torrento, J. E. [UNESP] Grandini, C. R. [UNESP] Galindo, E. L. [UNESP] Pintão, C. A.F. [UNESP] Santos, A. A. [UNESP] Lisboa-Filho, P. N. [UNESP] Pontes, F. M.L. [UNESP] Correa, D. R.N. [UNESP] |
author_role |
author |
author2 |
Torrento, J. E. [UNESP] Grandini, C. R. [UNESP] Galindo, E. L. [UNESP] Pintão, C. A.F. [UNESP] Santos, A. A. [UNESP] Lisboa-Filho, P. N. [UNESP] Pontes, F. M.L. [UNESP] Correa, D. R.N. [UNESP] |
author2_role |
author author author author author author author author |
dc.contributor.none.fl_str_mv |
Universidade Estadual Paulista (UNESP) |
dc.contributor.author.fl_str_mv |
Pinto, B. O. [UNESP] Torrento, J. E. [UNESP] Grandini, C. R. [UNESP] Galindo, E. L. [UNESP] Pintão, C. A.F. [UNESP] Santos, A. A. [UNESP] Lisboa-Filho, P. N. [UNESP] Pontes, F. M.L. [UNESP] Correa, D. R.N. [UNESP] |
description |
Single-axis knee prosthesis is an artificial biomechanical device that provides motion to amputees without the need for assistance appliances. Besides it is mainly composed of metallic materials, the current commercial materials did not group adequate properties for long-term usage or accessible cost. This study produced and characterized Ti-(10 −x)Al-xV (x = 0, 2, and 4 wt.%) alloys for potential use as single-axis knee prostheses. The samples exhibited a gradual decrease in the density values, with proper chemical mixing of the alloying elements on the micro-scale. The phase composition exhibited a primary α phase with a minor α′ + β phase for the Ti-8Al-2V and Ti-6Al-4V samples. Due to their different atomic radius compared to Ti, the addition of alloying elements changed the cell parameters. Their selected mechanical properties (Young’s modulus, Vickers microhardness, and damping factor) performed better values than the CP-Ti grade 4. The samples also exhibited good corrosion properties against the simulated marine solution. The tribocorrosion resistance of the samples was better than the reference material, with the wear tracks composed of some tribolayers and grooves resulting from adhesive and abrasive wear. The Ti-10Al alloy displayed the best properties and estimated low cost to be used as single-axis knee prostheses. |
publishDate |
2023 |
dc.date.none.fl_str_mv |
2023-07-29T16:08:54Z 2023-07-29T16:08:54Z 2023-12-01 |
dc.type.status.fl_str_mv |
info:eu-repo/semantics/publishedVersion |
dc.type.driver.fl_str_mv |
info:eu-repo/semantics/article |
format |
article |
status_str |
publishedVersion |
dc.identifier.uri.fl_str_mv |
http://dx.doi.org/10.1038/s41598-023-31548-1 Scientific Reports, v. 13, n. 1, 2023. 2045-2322 http://hdl.handle.net/11449/249775 10.1038/s41598-023-31548-1 2-s2.0-85150314909 |
url |
http://dx.doi.org/10.1038/s41598-023-31548-1 http://hdl.handle.net/11449/249775 |
identifier_str_mv |
Scientific Reports, v. 13, n. 1, 2023. 2045-2322 10.1038/s41598-023-31548-1 2-s2.0-85150314909 |
dc.language.iso.fl_str_mv |
eng |
language |
eng |
dc.relation.none.fl_str_mv |
Scientific Reports |
dc.rights.driver.fl_str_mv |
info:eu-repo/semantics/openAccess |
eu_rights_str_mv |
openAccess |
dc.source.none.fl_str_mv |
Scopus reponame:Repositório Institucional da UNESP instname:Universidade Estadual Paulista (UNESP) instacron:UNESP |
instname_str |
Universidade Estadual Paulista (UNESP) |
instacron_str |
UNESP |
institution |
UNESP |
reponame_str |
Repositório Institucional da UNESP |
collection |
Repositório Institucional da UNESP |
repository.name.fl_str_mv |
Repositório Institucional da UNESP - Universidade Estadual Paulista (UNESP) |
repository.mail.fl_str_mv |
|
_version_ |
1808128471349592064 |