Análise da pulsação térmica do processo TIG na soldagem da liga AA6063T6
Autor(a) principal: | |
---|---|
Data de Publicação: | 2014 |
Tipo de documento: | Dissertação |
Idioma: | por |
Título da fonte: | Repositório Institucional da UNESP |
Texto Completo: | http://hdl.handle.net/11449/123836 http://www.athena.biblioteca.unesp.br/exlibris/bd/cathedra/28-05-2015/000823683.pdf |
Resumo: | For some aluminum alloys, especially 6xxx (Al-Mg-Si) series, the able to develop solidification cracking in AC-GTAW welding is a constant preoccupation. In operation scope the minimal incident of this, or even its elimination, has been done by methods that are able to modify the microestrural in melted pool zone and thermic affected zone by agitation of the melted pool. IN AC-GTAW welding process, recourses applied for agitation of the melted pool, and following microestrutural depuration, are the electro polarity inversion frequency and thermic pulse cycle frequency. Be sure that this knowledge and its correct application for decrease solidification cracking is important to the process engineering and it constitutes an important technical information for available. On this work, the AC-GTAW thermic pulse welding on plate was used on AA6063T6 aluminium alloy analysis results for 50,100 and 200Hz electro polority inversion frequency, in agreement with 0,5;1,0;1,7 and 5,0Hz thermic pulse cycle frequency. The Houldcroft weldability test was enlargement used how important tool for this analysis, in agreement with macro and microestrutural analysis of melted pool zone and thermic affected zone. Althogh the solidification cracking formation has not been eliminated, it was possible to verify their decreasing due by increase of the electro polarity inversion frequency and increase thermic pulse cycle frequency, followed by grain depuration in melted pool zone and thermic affected zone |
id |
UNSP_dab3f607e31e9710b1f7888b9f2c52c0 |
---|---|
oai_identifier_str |
oai:repositorio.unesp.br:11449/123836 |
network_acronym_str |
UNSP |
network_name_str |
Repositório Institucional da UNESP |
repository_id_str |
2946 |
spelling |
Análise da pulsação térmica do processo TIG na soldagem da liga AA6063T6SoldagemAluminioLigas de aluminioWeldingFor some aluminum alloys, especially 6xxx (Al-Mg-Si) series, the able to develop solidification cracking in AC-GTAW welding is a constant preoccupation. In operation scope the minimal incident of this, or even its elimination, has been done by methods that are able to modify the microestrural in melted pool zone and thermic affected zone by agitation of the melted pool. IN AC-GTAW welding process, recourses applied for agitation of the melted pool, and following microestrutural depuration, are the electro polarity inversion frequency and thermic pulse cycle frequency. Be sure that this knowledge and its correct application for decrease solidification cracking is important to the process engineering and it constitutes an important technical information for available. On this work, the AC-GTAW thermic pulse welding on plate was used on AA6063T6 aluminium alloy analysis results for 50,100 and 200Hz electro polority inversion frequency, in agreement with 0,5;1,0;1,7 and 5,0Hz thermic pulse cycle frequency. The Houldcroft weldability test was enlargement used how important tool for this analysis, in agreement with macro and microestrutural analysis of melted pool zone and thermic affected zone. Althogh the solidification cracking formation has not been eliminated, it was possible to verify their decreasing due by increase of the electro polarity inversion frequency and increase thermic pulse cycle frequency, followed by grain depuration in melted pool zone and thermic affected zoneEm algumas ligas de alumínio, em especial as da série 6xxx (Al-Si-Mg), a maior suscetibilidade no desenvolvimento de trincas de solidificação é uma preocupação constante na soldagem TIG CA autógena. No âmbito operacional a minimização dessa ocorrência, ou mesmo sua eliminação, têm sido feita pela utilização de métodos que fundamentalmente procuram modificar a estrutura bruta de fusão refinando o metal na zona fundida e na zona termicamente afetada através da agitação da poça de fusão. No processo TIG CA, recursos utilizados para a agitação da poça de fusão, e consequente refinamento da microestrutura, são a frequencia de inversão de polaridade do eletrodo e a frequencia de periodo de pulso térmico. Certamente o conhecimento de tais recursos e sua adequada publicação na minimização das trincas de solidificação despertam interesse no campo da engenharia de fabricação e constitui-se em importante informação técnica e ser disponibilizada. Nesse trabalho foi utilizado a soldagem TIG CA autógena com pulsação térmica na liga de alumínio AA6063T6 avaliou-se as frequencias da inversão de polaridade do eletrodo em 50, 100 e 200 Hz, combinadas com freqüencias de período de pulso térmico de 0,5; 1,0; 2,0; e 4,0 Hz. O teste de Houldcroft foi amplamente utilizado como importante ferramenta nessa avalição, em conjunto com análise macro e microestrutural da zona fundida e termicamente afetada. Embora não tenha sido eliminada completamente a formação de trincas de solidificação, foi possível verificar a diminuição das mesmas em função do aumento da freqüência de inversão de polaridade do eletrodo e do aumento da freqüência do período de pulso térmico, acompanhado de um refinamento dos grãos na zona fundida e na zona termicamente afetadaUniversidade Estadual Paulista (Unesp)Gonçalves, Gilberto de Magalhães Bento [UNESP]Universidade Estadual Paulista (Unesp)Macedo Filho, Vanderlei Guilherme de [UNESP]2015-06-17T19:34:04Z2015-06-17T19:34:04Z2014-12-17info:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/masterThesis73 f. : il.application/pdfMACEDO FILHO, Vanderlei Guilherme de. Análise da pulsação térmica do processo TIG na soldagem da liga AA6063T6. 2014. 73 f. Dissertação (mestrado) - Universidade Estadual Paulista Julio de Mesquita Fiho, Faculdade de Engenharia, 2014.http://hdl.handle.net/11449/123836000823683http://www.athena.biblioteca.unesp.br/exlibris/bd/cathedra/28-05-2015/000823683.pdf33004056080P8Alephreponame:Repositório Institucional da UNESPinstname:Universidade Estadual Paulista (UNESP)instacron:UNESPporinfo:eu-repo/semantics/openAccess2024-06-28T19:30:34Zoai:repositorio.unesp.br:11449/123836Repositório InstitucionalPUBhttp://repositorio.unesp.br/oai/requestopendoar:29462024-08-05T19:08:06.585320Repositório Institucional da UNESP - Universidade Estadual Paulista (UNESP)false |
dc.title.none.fl_str_mv |
Análise da pulsação térmica do processo TIG na soldagem da liga AA6063T6 |
title |
Análise da pulsação térmica do processo TIG na soldagem da liga AA6063T6 |
spellingShingle |
Análise da pulsação térmica do processo TIG na soldagem da liga AA6063T6 Macedo Filho, Vanderlei Guilherme de [UNESP] Soldagem Aluminio Ligas de aluminio Welding |
title_short |
Análise da pulsação térmica do processo TIG na soldagem da liga AA6063T6 |
title_full |
Análise da pulsação térmica do processo TIG na soldagem da liga AA6063T6 |
title_fullStr |
Análise da pulsação térmica do processo TIG na soldagem da liga AA6063T6 |
title_full_unstemmed |
Análise da pulsação térmica do processo TIG na soldagem da liga AA6063T6 |
title_sort |
Análise da pulsação térmica do processo TIG na soldagem da liga AA6063T6 |
author |
Macedo Filho, Vanderlei Guilherme de [UNESP] |
author_facet |
Macedo Filho, Vanderlei Guilherme de [UNESP] |
author_role |
author |
dc.contributor.none.fl_str_mv |
Gonçalves, Gilberto de Magalhães Bento [UNESP] Universidade Estadual Paulista (Unesp) |
dc.contributor.author.fl_str_mv |
Macedo Filho, Vanderlei Guilherme de [UNESP] |
dc.subject.por.fl_str_mv |
Soldagem Aluminio Ligas de aluminio Welding |
topic |
Soldagem Aluminio Ligas de aluminio Welding |
description |
For some aluminum alloys, especially 6xxx (Al-Mg-Si) series, the able to develop solidification cracking in AC-GTAW welding is a constant preoccupation. In operation scope the minimal incident of this, or even its elimination, has been done by methods that are able to modify the microestrural in melted pool zone and thermic affected zone by agitation of the melted pool. IN AC-GTAW welding process, recourses applied for agitation of the melted pool, and following microestrutural depuration, are the electro polarity inversion frequency and thermic pulse cycle frequency. Be sure that this knowledge and its correct application for decrease solidification cracking is important to the process engineering and it constitutes an important technical information for available. On this work, the AC-GTAW thermic pulse welding on plate was used on AA6063T6 aluminium alloy analysis results for 50,100 and 200Hz electro polority inversion frequency, in agreement with 0,5;1,0;1,7 and 5,0Hz thermic pulse cycle frequency. The Houldcroft weldability test was enlargement used how important tool for this analysis, in agreement with macro and microestrutural analysis of melted pool zone and thermic affected zone. Althogh the solidification cracking formation has not been eliminated, it was possible to verify their decreasing due by increase of the electro polarity inversion frequency and increase thermic pulse cycle frequency, followed by grain depuration in melted pool zone and thermic affected zone |
publishDate |
2014 |
dc.date.none.fl_str_mv |
2014-12-17 2015-06-17T19:34:04Z 2015-06-17T19:34:04Z |
dc.type.status.fl_str_mv |
info:eu-repo/semantics/publishedVersion |
dc.type.driver.fl_str_mv |
info:eu-repo/semantics/masterThesis |
format |
masterThesis |
status_str |
publishedVersion |
dc.identifier.uri.fl_str_mv |
MACEDO FILHO, Vanderlei Guilherme de. Análise da pulsação térmica do processo TIG na soldagem da liga AA6063T6. 2014. 73 f. Dissertação (mestrado) - Universidade Estadual Paulista Julio de Mesquita Fiho, Faculdade de Engenharia, 2014. http://hdl.handle.net/11449/123836 000823683 http://www.athena.biblioteca.unesp.br/exlibris/bd/cathedra/28-05-2015/000823683.pdf 33004056080P8 |
identifier_str_mv |
MACEDO FILHO, Vanderlei Guilherme de. Análise da pulsação térmica do processo TIG na soldagem da liga AA6063T6. 2014. 73 f. Dissertação (mestrado) - Universidade Estadual Paulista Julio de Mesquita Fiho, Faculdade de Engenharia, 2014. 000823683 33004056080P8 |
url |
http://hdl.handle.net/11449/123836 http://www.athena.biblioteca.unesp.br/exlibris/bd/cathedra/28-05-2015/000823683.pdf |
dc.language.iso.fl_str_mv |
por |
language |
por |
dc.rights.driver.fl_str_mv |
info:eu-repo/semantics/openAccess |
eu_rights_str_mv |
openAccess |
dc.format.none.fl_str_mv |
73 f. : il. application/pdf |
dc.publisher.none.fl_str_mv |
Universidade Estadual Paulista (Unesp) |
publisher.none.fl_str_mv |
Universidade Estadual Paulista (Unesp) |
dc.source.none.fl_str_mv |
Aleph reponame:Repositório Institucional da UNESP instname:Universidade Estadual Paulista (UNESP) instacron:UNESP |
instname_str |
Universidade Estadual Paulista (UNESP) |
instacron_str |
UNESP |
institution |
UNESP |
reponame_str |
Repositório Institucional da UNESP |
collection |
Repositório Institucional da UNESP |
repository.name.fl_str_mv |
Repositório Institucional da UNESP - Universidade Estadual Paulista (UNESP) |
repository.mail.fl_str_mv |
|
_version_ |
1808129023167954944 |