Multi-scale matching for the automatic location of control points in large scale aerial images using terrestrial scenes

• Autor(a) principal: Berveglieri, A. [UNESP]
• Data de Publicação: 2014
• Outros Autores: Tommaselli, A. M G [UNESP]
• Tipo de documento: Artigo de conferência
• Idioma: eng
• Título da fonte: Repositório Institucional da UNESP
• Texto Completo: http://dx.doi.org/10.5194/isprsarchives-XL-3-W1-27-2014; http://hdl.handle.net/11449/171797
• topic: Bundle adjustment; Image chip; Orientation; Photogrammetry; SIFT

A technique to automatically locate Ground Control Points (GCPs) in large aerial images is presented considering the availability of low accuracy direct georeferencing data. The approach is based on image chips of GCPs extracted from vertical terrestrial images. A strategy combining image matching techniques was implemented to select correct matches. These matches were used to define a 2D transformation with which the GCP is projected close to its correct position, reducing the search space in the aerial image. Area-based matching with some refinements is used to locate GCPs with sub-pixel precision. Experiments were performed with multi-scale images and assessed with a bundle block adjustment simulating an indirect sensor orientation. The accuracy analysis was accomplished based on discrepancies obtained from GCPs and check points. The results were better than interactive measurements and a planimetric accuracy of 1/5 of the Ground Sample Distance (GSD) for the check points was achieved.