Estudo de um projeto mecânico e fabricação de uma bomba d'água utilizando programas computacionais

• Autor(a) principal: Flaibam, Pedro Paulo [UNESP]
• Data de Publicação: 2018
• Tipo de documento: Trabalho de conclusão de curso
• Idioma: por
• Título da fonte: Repositório Institucional da UNESP
• Texto Completo: http://hdl.handle.net/11449/203051; http://www.athena.biblioteca.unesp.br/exlibris/bd/capelo/2019-10-22/000918557.pdf
• topic: Projetos de engenharia; Programação (Computadores); Projeto auxiliado por computador; Computer programming

The main objectives of the following paper are the analysis of a project, learning and familiarization with computer programs. The project defined is a vane pump presented in the book Designer of Machines, by author Eng. Provenza. The analysis was possible after modeling the project using a CAD program. Another goal is to analyze the manufacturing of parts of the pump through the use of a CAM program. The use of the Autodesk Fusion 360 program was defined due to the fact that it has CAD and CAM functions. After the modeling of the project, two possible changes were proposed, both aiming at the performance of the pump. It was decided by one of the changes due to the greater compatibility of the project in relation to the vane pumps found in the market. The result of machining programming in CAM was positive, considering that the manufacturing simulations occurred without any problems