Study of ceramic block manufacture with the addition of waste from iron ore extraction
Autor(a) principal: | |
---|---|
Data de Publicação: | 2014 |
Outros Autores: | , , , |
Tipo de documento: | Artigo de conferência |
Idioma: | eng |
Título da fonte: | Repositório Institucional da UNESP |
Texto Completo: | http://www.scientific.net/MSF.798-799.275 http://hdl.handle.net/11449/130202 |
Resumo: | This work is intended to study the possibility of adding an amount of waste from iron mining in the ceramic mass. Clay and coal, from Vale do Paraiba, Sao Paulo, Brazil, were used in this research. These raw materials are used in the ceramic block manufacture. Clay and waste were analyzed by X-ray fluorescence and X-ray diffraction, particle size, differential thermal and thermogravimetric analysis. Liquid limit and plasticity index tests were performed in order to determine the amount of waste that which should be used in the ceramic mass. After determining the amount of waste, all samples were uniaxially pressed and sintered at 900 degrees C. Surface roughness measurements, apparent porosity and bulk density technique and three-point flexural tests were also performed to characterize the samples. The results showed that by adding the exact amount of waste, which was determined by the essays, it is possible to manufacture solid bricks. |
id |
UNSP_f73748c3d215112a6b4f7790a037f35f |
---|---|
oai_identifier_str |
oai:repositorio.unesp.br:11449/130202 |
network_acronym_str |
UNSP |
network_name_str |
Repositório Institucional da UNESP |
repository_id_str |
2946 |
spelling |
Study of ceramic block manufacture with the addition of waste from iron ore extractionRed ceramicWaste from iron miningClayRecyclingCeramic blockThis work is intended to study the possibility of adding an amount of waste from iron mining in the ceramic mass. Clay and coal, from Vale do Paraiba, Sao Paulo, Brazil, were used in this research. These raw materials are used in the ceramic block manufacture. Clay and waste were analyzed by X-ray fluorescence and X-ray diffraction, particle size, differential thermal and thermogravimetric analysis. Liquid limit and plasticity index tests were performed in order to determine the amount of waste that which should be used in the ceramic mass. After determining the amount of waste, all samples were uniaxially pressed and sintered at 900 degrees C. Surface roughness measurements, apparent porosity and bulk density technique and three-point flexural tests were also performed to characterize the samples. The results showed that by adding the exact amount of waste, which was determined by the essays, it is possible to manufacture solid bricks.Instituto de Aeronáutica e Espaço, Divisão de MateriaisUniversidade Estadual Paulista, Departamento de Materiais e Tecnologia, Faculdade de Engenharia de GuaratinguetáTrans Tech Publications LtdUniversidade Estadual Paulista (Unesp)Instituto de Aeronáutica e Espaço (IAE)Nociti, Denyse Meirelles [UNESP]Campos, Elson de [UNESP]Santos, Marcelo Pereira [UNESP]Bittencourt, Rosa Maria [UNESP]Melo, Francisco Cristóvão Lourenço de2015-11-03T15:30:13Z2015-11-03T15:30:13Z2014-01-01info:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/conferenceObject275-280http://www.scientific.net/MSF.798-799.275Brazilian Ceramic Conference 57. Stafa-zurich: Trans Tech Publications Ltd, v. 798-799, p. 275-280, 2014.0255-5476http://hdl.handle.net/11449/13020210.4028/www.scientific.net/MSF.798-799.275WOS:000347955400047Web of Sciencereponame:Repositório Institucional da UNESPinstname:Universidade Estadual Paulista (UNESP)instacron:UNESPengBrazilian Ceramic Conference 570,180info:eu-repo/semantics/openAccess2024-07-02T15:04:23Zoai:repositorio.unesp.br:11449/130202Repositório InstitucionalPUBhttp://repositorio.unesp.br/oai/requestopendoar:29462024-08-05T21:00:37.619925Repositório Institucional da UNESP - Universidade Estadual Paulista (UNESP)false |
dc.title.none.fl_str_mv |
Study of ceramic block manufacture with the addition of waste from iron ore extraction |
title |
Study of ceramic block manufacture with the addition of waste from iron ore extraction |
spellingShingle |
Study of ceramic block manufacture with the addition of waste from iron ore extraction Nociti, Denyse Meirelles [UNESP] Red ceramic Waste from iron mining Clay Recycling Ceramic block |
title_short |
Study of ceramic block manufacture with the addition of waste from iron ore extraction |
title_full |
Study of ceramic block manufacture with the addition of waste from iron ore extraction |
title_fullStr |
Study of ceramic block manufacture with the addition of waste from iron ore extraction |
title_full_unstemmed |
Study of ceramic block manufacture with the addition of waste from iron ore extraction |
title_sort |
Study of ceramic block manufacture with the addition of waste from iron ore extraction |
author |
Nociti, Denyse Meirelles [UNESP] |
author_facet |
Nociti, Denyse Meirelles [UNESP] Campos, Elson de [UNESP] Santos, Marcelo Pereira [UNESP] Bittencourt, Rosa Maria [UNESP] Melo, Francisco Cristóvão Lourenço de |
author_role |
author |
author2 |
Campos, Elson de [UNESP] Santos, Marcelo Pereira [UNESP] Bittencourt, Rosa Maria [UNESP] Melo, Francisco Cristóvão Lourenço de |
author2_role |
author author author author |
dc.contributor.none.fl_str_mv |
Universidade Estadual Paulista (Unesp) Instituto de Aeronáutica e Espaço (IAE) |
dc.contributor.author.fl_str_mv |
Nociti, Denyse Meirelles [UNESP] Campos, Elson de [UNESP] Santos, Marcelo Pereira [UNESP] Bittencourt, Rosa Maria [UNESP] Melo, Francisco Cristóvão Lourenço de |
dc.subject.por.fl_str_mv |
Red ceramic Waste from iron mining Clay Recycling Ceramic block |
topic |
Red ceramic Waste from iron mining Clay Recycling Ceramic block |
description |
This work is intended to study the possibility of adding an amount of waste from iron mining in the ceramic mass. Clay and coal, from Vale do Paraiba, Sao Paulo, Brazil, were used in this research. These raw materials are used in the ceramic block manufacture. Clay and waste were analyzed by X-ray fluorescence and X-ray diffraction, particle size, differential thermal and thermogravimetric analysis. Liquid limit and plasticity index tests were performed in order to determine the amount of waste that which should be used in the ceramic mass. After determining the amount of waste, all samples were uniaxially pressed and sintered at 900 degrees C. Surface roughness measurements, apparent porosity and bulk density technique and three-point flexural tests were also performed to characterize the samples. The results showed that by adding the exact amount of waste, which was determined by the essays, it is possible to manufacture solid bricks. |
publishDate |
2014 |
dc.date.none.fl_str_mv |
2014-01-01 2015-11-03T15:30:13Z 2015-11-03T15:30:13Z |
dc.type.status.fl_str_mv |
info:eu-repo/semantics/publishedVersion |
dc.type.driver.fl_str_mv |
info:eu-repo/semantics/conferenceObject |
format |
conferenceObject |
status_str |
publishedVersion |
dc.identifier.uri.fl_str_mv |
http://www.scientific.net/MSF.798-799.275 Brazilian Ceramic Conference 57. Stafa-zurich: Trans Tech Publications Ltd, v. 798-799, p. 275-280, 2014. 0255-5476 http://hdl.handle.net/11449/130202 10.4028/www.scientific.net/MSF.798-799.275 WOS:000347955400047 |
url |
http://www.scientific.net/MSF.798-799.275 http://hdl.handle.net/11449/130202 |
identifier_str_mv |
Brazilian Ceramic Conference 57. Stafa-zurich: Trans Tech Publications Ltd, v. 798-799, p. 275-280, 2014. 0255-5476 10.4028/www.scientific.net/MSF.798-799.275 WOS:000347955400047 |
dc.language.iso.fl_str_mv |
eng |
language |
eng |
dc.relation.none.fl_str_mv |
Brazilian Ceramic Conference 57 0,180 |
dc.rights.driver.fl_str_mv |
info:eu-repo/semantics/openAccess |
eu_rights_str_mv |
openAccess |
dc.format.none.fl_str_mv |
275-280 |
dc.publisher.none.fl_str_mv |
Trans Tech Publications Ltd |
publisher.none.fl_str_mv |
Trans Tech Publications Ltd |
dc.source.none.fl_str_mv |
Web of Science reponame:Repositório Institucional da UNESP instname:Universidade Estadual Paulista (UNESP) instacron:UNESP |
instname_str |
Universidade Estadual Paulista (UNESP) |
instacron_str |
UNESP |
institution |
UNESP |
reponame_str |
Repositório Institucional da UNESP |
collection |
Repositório Institucional da UNESP |
repository.name.fl_str_mv |
Repositório Institucional da UNESP - Universidade Estadual Paulista (UNESP) |
repository.mail.fl_str_mv |
|
_version_ |
1808129273593069568 |