Two-wavelength whole-field interferometry setup for thermal lens study

• Autor(a) principal: Silva, Danilo M.
• Data de Publicação: 2012
• Outros Autores: Barbosa, Eduardo A. [UNESP], Wetter, Niklaus U.
• Tipo de documento: Artigo de conferência
• Idioma: eng
• Título da fonte: Repositório Institucional da UNESP
• Texto Completo: http://dx.doi.org/10.1117/12.978186; http://hdl.handle.net/11449/73839
• topic: laser; multi-wavelength; Speckle; thermal lens; wavefront sensing; Absorbed pump power; Digital speckle pattern interferometry; Incident pump power; Low-noise measurements; Multiwavelength; Thermal lens; Thermal lens effects; Wave-front sensing; Glass; Holography; Interferometry; Lasers; Wavefronts

In this paper we present a new approach for thermal lens analysis using a two-wavelength DSPI (Digital Speckle Pattern Interferometry) setup for wavefront sensing. The employed geometry enables the sensor to detect wavefronts with small phase differences and inherent aberrations found in induced lenses. The wavefronts was reconstructed by four-stepping fringe evaluation and branch-cut unwrapping from fringes formed onto a diffusive glass. Real-time single-exposure contour interferograms could be obtained in order to get discernible and low-spacial frequency contour fringes and obtain low-noise measurements. In our experiments we studied the thermal lens effect in a 4% Er-doped CaO-Al2O3 glass sample. The diode lasers were tuned to have a contour interval of around 120 μm. The incident pump power was longitudinally and collinearly oriented with the probe beams. Each interferogram described a spherical-like wavefront. Using the ABCD matrix formalism we obtained the induced lens dioptric power from the thermal effect for different values of absorbed pump power. © 2012 Copyright SPIE.