Um estudo sobre a preparação metalográfica da liga de aluminio AA7075-T6
Autor(a) principal: | |
---|---|
Data de Publicação: | 2012 |
Tipo de documento: | Trabalho de conclusão de curso |
Idioma: | por |
Título da fonte: | Repositório Institucional da UNESP |
Texto Completo: | http://hdl.handle.net/11449/119367 |
Resumo: | The increasing technological innovation and demand for materials with better properties boosts research into new materials and new alloys. To do so, aluminum alloys are being developed, among them the AA7075-T6, having many applications in aerospace and military industries, machinery and equipment, molds for plastic injection and structures. To study and understand the properties, characteristics and especially the microstructure of the material, the metallographic preparation is essential. This paper presents new methodologies to achieve the metallography of samples of scrap alloy AA7075-T6, with emphasis on methods of polishing. For the five samples, the best results were those with specific grinding, the samples only going down on the sander. For polishing, the most effective method so far has been using the polishing cloth 16.3, of ATM enterprise, solution of diamond 3 μm, solution of diamond 1 μm, and colloidal solution of OP-S. For the etching, the reactive agent used was phosphoric acid (H3PO4) 85% P.A., as 90% in the proportion of distilled water to 10% acid. The best results were obtained in the attacks of 300 and 240 seconds, revealing the grain boundaries in most areas. Methodologies need more studies and more tests, but the results have proved to be satisfactory |
id |
UNSP_ffb05ae3ce53bb24c54ee3799571219b |
---|---|
oai_identifier_str |
oai:repositorio.unesp.br:11449/119367 |
network_acronym_str |
UNSP |
network_name_str |
Repositório Institucional da UNESP |
repository_id_str |
2946 |
spelling |
Um estudo sobre a preparação metalográfica da liga de aluminio AA7075-T6MetalografiaAluminioThe increasing technological innovation and demand for materials with better properties boosts research into new materials and new alloys. To do so, aluminum alloys are being developed, among them the AA7075-T6, having many applications in aerospace and military industries, machinery and equipment, molds for plastic injection and structures. To study and understand the properties, characteristics and especially the microstructure of the material, the metallographic preparation is essential. This paper presents new methodologies to achieve the metallography of samples of scrap alloy AA7075-T6, with emphasis on methods of polishing. For the five samples, the best results were those with specific grinding, the samples only going down on the sander. For polishing, the most effective method so far has been using the polishing cloth 16.3, of ATM enterprise, solution of diamond 3 μm, solution of diamond 1 μm, and colloidal solution of OP-S. For the etching, the reactive agent used was phosphoric acid (H3PO4) 85% P.A., as 90% in the proportion of distilled water to 10% acid. The best results were obtained in the attacks of 300 and 240 seconds, revealing the grain boundaries in most areas. Methodologies need more studies and more tests, but the results have proved to be satisfactoryA crescente inovação tecnológica e demanda por materiais com melhores propriedades impulsiona pesquisas sobre novos materiais e novas ligas. Para tanto, foram desenvolvidas as ligas de alumínio, dentre elas a AA7075-T6, possuindo diversas aplicações como na indústria aeronáutica, militar, máquinas e equipamentos, em moldes para injeção de plástico e em estruturas. Para estudar e compreender propriedades, características e principalmente a microestrutura do material, a preparação metalográfica é essencial. Este trabalho apresenta novas metodologias para realizar a metalografia de amostras de cavaco da liga AA7075-T6, com ênfase em métodos de polimento. Para as cinco amostras, os melhores resultados se deram com lixamento específico, passando as amostras apenas em um dos sentidos na lixadeira. Para o polimento, o método mais eficiente foi utilizando pano de polimento 16.3 da empresa ATM, solução de diamante 3 μm, solução de diamante 1 μm e solução coloidal de OP-S. Para o ataque químico, o agente reativo utilizado foi o ácido fosfórico (H3PO4) 85% P.A., na proporção 90% de água destilada para 10% de ácido. Os melhores resultados foram obtidos nos ataques de 300 e de 240 segundos, revelando os contornos de grão na maioria deles. As metodologias necessitam de mais estudos e mais testes, porém os resultados já se mostraram satisfatóriosUniversidade Estadual Paulista (Unesp)Ribeiro, Marcos Valério [UNESP]Universidade Estadual Paulista (Unesp)Guerrero, Diego Augusto Trannin [UNESP]2015-03-23T15:18:54Z2015-03-23T15:18:54Z2012info:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/bachelorThesisapplication/pdfGUERRERO, Diego Augusto Trannin. Um estudo sobre a preparação metalográfica da liga de aluminio AA7075-T6. 2012. 1 CD-ROM. Trabalho de conclusão de curso (bacharelado - Engenharia de Materiais) – Universidade Estadual Paulista, Faculdade de Engenharia de Guaratinguetá, 2012.http://hdl.handle.net/11449/119367000709021guerrero_dat_tcc_guara.pdf2001862427592659Alephreponame:Repositório Institucional da UNESPinstname:Universidade Estadual Paulista (UNESP)instacron:UNESPporinfo:eu-repo/semantics/openAccess2024-07-02T19:08:26Zoai:repositorio.unesp.br:11449/119367Repositório InstitucionalPUBhttp://repositorio.unesp.br/oai/requestopendoar:29462024-08-05T19:58:02.700376Repositório Institucional da UNESP - Universidade Estadual Paulista (UNESP)false |
dc.title.none.fl_str_mv |
Um estudo sobre a preparação metalográfica da liga de aluminio AA7075-T6 |
title |
Um estudo sobre a preparação metalográfica da liga de aluminio AA7075-T6 |
spellingShingle |
Um estudo sobre a preparação metalográfica da liga de aluminio AA7075-T6 Guerrero, Diego Augusto Trannin [UNESP] Metalografia Aluminio |
title_short |
Um estudo sobre a preparação metalográfica da liga de aluminio AA7075-T6 |
title_full |
Um estudo sobre a preparação metalográfica da liga de aluminio AA7075-T6 |
title_fullStr |
Um estudo sobre a preparação metalográfica da liga de aluminio AA7075-T6 |
title_full_unstemmed |
Um estudo sobre a preparação metalográfica da liga de aluminio AA7075-T6 |
title_sort |
Um estudo sobre a preparação metalográfica da liga de aluminio AA7075-T6 |
author |
Guerrero, Diego Augusto Trannin [UNESP] |
author_facet |
Guerrero, Diego Augusto Trannin [UNESP] |
author_role |
author |
dc.contributor.none.fl_str_mv |
Ribeiro, Marcos Valério [UNESP] Universidade Estadual Paulista (Unesp) |
dc.contributor.author.fl_str_mv |
Guerrero, Diego Augusto Trannin [UNESP] |
dc.subject.por.fl_str_mv |
Metalografia Aluminio |
topic |
Metalografia Aluminio |
description |
The increasing technological innovation and demand for materials with better properties boosts research into new materials and new alloys. To do so, aluminum alloys are being developed, among them the AA7075-T6, having many applications in aerospace and military industries, machinery and equipment, molds for plastic injection and structures. To study and understand the properties, characteristics and especially the microstructure of the material, the metallographic preparation is essential. This paper presents new methodologies to achieve the metallography of samples of scrap alloy AA7075-T6, with emphasis on methods of polishing. For the five samples, the best results were those with specific grinding, the samples only going down on the sander. For polishing, the most effective method so far has been using the polishing cloth 16.3, of ATM enterprise, solution of diamond 3 μm, solution of diamond 1 μm, and colloidal solution of OP-S. For the etching, the reactive agent used was phosphoric acid (H3PO4) 85% P.A., as 90% in the proportion of distilled water to 10% acid. The best results were obtained in the attacks of 300 and 240 seconds, revealing the grain boundaries in most areas. Methodologies need more studies and more tests, but the results have proved to be satisfactory |
publishDate |
2012 |
dc.date.none.fl_str_mv |
2012 2015-03-23T15:18:54Z 2015-03-23T15:18:54Z |
dc.type.status.fl_str_mv |
info:eu-repo/semantics/publishedVersion |
dc.type.driver.fl_str_mv |
info:eu-repo/semantics/bachelorThesis |
format |
bachelorThesis |
status_str |
publishedVersion |
dc.identifier.uri.fl_str_mv |
GUERRERO, Diego Augusto Trannin. Um estudo sobre a preparação metalográfica da liga de aluminio AA7075-T6. 2012. 1 CD-ROM. Trabalho de conclusão de curso (bacharelado - Engenharia de Materiais) – Universidade Estadual Paulista, Faculdade de Engenharia de Guaratinguetá, 2012. http://hdl.handle.net/11449/119367 000709021 guerrero_dat_tcc_guara.pdf 2001862427592659 |
identifier_str_mv |
GUERRERO, Diego Augusto Trannin. Um estudo sobre a preparação metalográfica da liga de aluminio AA7075-T6. 2012. 1 CD-ROM. Trabalho de conclusão de curso (bacharelado - Engenharia de Materiais) – Universidade Estadual Paulista, Faculdade de Engenharia de Guaratinguetá, 2012. 000709021 guerrero_dat_tcc_guara.pdf 2001862427592659 |
url |
http://hdl.handle.net/11449/119367 |
dc.language.iso.fl_str_mv |
por |
language |
por |
dc.rights.driver.fl_str_mv |
info:eu-repo/semantics/openAccess |
eu_rights_str_mv |
openAccess |
dc.format.none.fl_str_mv |
application/pdf |
dc.publisher.none.fl_str_mv |
Universidade Estadual Paulista (Unesp) |
publisher.none.fl_str_mv |
Universidade Estadual Paulista (Unesp) |
dc.source.none.fl_str_mv |
Aleph reponame:Repositório Institucional da UNESP instname:Universidade Estadual Paulista (UNESP) instacron:UNESP |
instname_str |
Universidade Estadual Paulista (UNESP) |
instacron_str |
UNESP |
institution |
UNESP |
reponame_str |
Repositório Institucional da UNESP |
collection |
Repositório Institucional da UNESP |
repository.name.fl_str_mv |
Repositório Institucional da UNESP - Universidade Estadual Paulista (UNESP) |
repository.mail.fl_str_mv |
|
_version_ |
1808129143647240192 |