Comportamento de fratura de sistemas para restaurações cerâmicas
Autor(a) principal: | |
---|---|
Data de Publicação: | 2013 |
Tipo de documento: | Dissertação |
Idioma: | por |
Título da fonte: | Biblioteca de teses e dissertações da Universidade de Passo Fundo (BDTD UPF) |
Texto Completo: | http://10.0.217.128:8080/jspui/handle/tede/837 |
Resumo: | Materials such as the alumina-based zircônia-reinforced glass-infiltrated ceramic (In-Ceram Zirconia) and the yttria partially stabilized tetragonal zirconia ceramic (Y-TZP) are considered the best options to replace metal frameworks (IE). However, the clinical behavior of these materials is still not clear. Thus, the objective of this study was to evaluate the effect of the type of IE material in the fracture behavior of prosthetic crowns. Specimens were fabricated using a metal die simulating a prepared tooth. Four groups were evaluated (n=10): YZ-C YTZP IE produced by CAD-CAM (In-Ceram YZ, Vita); IZ-C In-Ceram Zirconia (Vita) IE produced by CAD-CAM; IZ-S In-Ceram Zirconia (Vita) IE produced by slip-casting; MC metal IE (control). The IE were veneered with porcelain and cemented over the dies with resin cement. Specimens were tested until fracture using a universal testing machine with the compressive load being applied with a 30º angle by a spherical piston, in 37 ºC distilled water. Fractography was performed using a stereomicroscope and a SEM. Data were analyzed with Anova and Student-Newman-Keuls test (α=0.05). Significant differences were found between the groups (p=0.022). MC showed the highest mean fracture load, statistically similar to YZ-C and different from IZ-C and IZS groups. There was no statistical difference between YZ-C, IZ-C and IZ-S. MC and YZ-C showed, as failure mode, porcelain chipping. For IZ-C and IZ-S, both chipping and total failure, involving the porcelain and IE, were observed. The specimens fracture behavior was in agreement with the behavior reported for clinical failures. It was concluded that YZ-C and MC crowns present superior fracture load and a more favorable failure mode than In-Ceram Zircônia crowns, regardless of the fabrication type (CAD-CAM or slip-casting) |
id |
UPF-1_44535dad2c7c46749e0cca51eab2451d |
---|---|
oai_identifier_str |
oai:tede.upf.br:tede/837 |
network_acronym_str |
UPF-1 |
network_name_str |
Biblioteca de teses e dissertações da Universidade de Passo Fundo (BDTD UPF) |
repository_id_str |
|
spelling |
Borba, MárciaCPF:99782944068http://lattes.cnpq.br/5230074566247388Bona, Álvaro DellaCPF:42784263053http://lattes.cnpq.br/7064579792237750CPF:70279055072http://lattes.cnpq.br/5268007521779481Sonza, Quéli Nunes2018-01-10T18:08:00Z2015-09-212013-08-16SONZA, Quéli Nunes. Comportamento de fratura de sistemas para restaurações cerâmicas. 2013. 133 f. Dissertação (Mestrado em Ciências da Saúde e Ciências Biológicas) - Universidade de Passo Fundo, Passo Fundo, 2013.http://10.0.217.128:8080/jspui/handle/tede/837Materials such as the alumina-based zircônia-reinforced glass-infiltrated ceramic (In-Ceram Zirconia) and the yttria partially stabilized tetragonal zirconia ceramic (Y-TZP) are considered the best options to replace metal frameworks (IE). However, the clinical behavior of these materials is still not clear. Thus, the objective of this study was to evaluate the effect of the type of IE material in the fracture behavior of prosthetic crowns. Specimens were fabricated using a metal die simulating a prepared tooth. Four groups were evaluated (n=10): YZ-C YTZP IE produced by CAD-CAM (In-Ceram YZ, Vita); IZ-C In-Ceram Zirconia (Vita) IE produced by CAD-CAM; IZ-S In-Ceram Zirconia (Vita) IE produced by slip-casting; MC metal IE (control). The IE were veneered with porcelain and cemented over the dies with resin cement. Specimens were tested until fracture using a universal testing machine with the compressive load being applied with a 30º angle by a spherical piston, in 37 ºC distilled water. Fractography was performed using a stereomicroscope and a SEM. Data were analyzed with Anova and Student-Newman-Keuls test (α=0.05). Significant differences were found between the groups (p=0.022). MC showed the highest mean fracture load, statistically similar to YZ-C and different from IZ-C and IZS groups. There was no statistical difference between YZ-C, IZ-C and IZ-S. MC and YZ-C showed, as failure mode, porcelain chipping. For IZ-C and IZ-S, both chipping and total failure, involving the porcelain and IE, were observed. The specimens fracture behavior was in agreement with the behavior reported for clinical failures. It was concluded that YZ-C and MC crowns present superior fracture load and a more favorable failure mode than In-Ceram Zircônia crowns, regardless of the fabrication type (CAD-CAM or slip-casting)Materiais como ceramica de alumina e zirconia infiltrada por vidro (In-Ceram Zirconia) e ceramica policristalina de zirconia tetragonal estabilizada com itria (Y-TZP) consideram-se as melhores candidatas a substituir as infraestruturas (IE) metalicas. Contudo, ainda existem duvidas quanto ao comportamento clinico desses materiais. Assim, o objetivo deste estudo e avaliar o efeito do tipo de material de IE no comportamento de fratura de coroas. As coroas foram confeccionadas a partir de um modelo de aco inoxidavel simulando um preparo. Quatro grupos foram avaliados (n=10): YZ-C . IE de Y-TZP (In-Ceram YZ, Vita) fabricada com a tecnica CAD-CAM; IZ-C . IE de In-Ceram Zirconia (Vita) fabricada com a tecnica CAD-CAM; IZ-S . IE de In-Ceram Zirconia (Vita) confeccionada com a tecnica da barbotina; MC . IE em metal (controle). As IE foram recobertas com porcelana e cimentadas sobre o preparo com cimento resinoso. As coroas foram testadas ate a fratura em maquina de ensaios com carga compressiva aplicada com angulacao de 30o por pistao esferico, em agua destilada a 37oC. Foi realizada fractografia, utilizado estereomicroscopio e MEV. Analisaram-se os dados com Anova e teste de Student-Newman-Keuls ( ¿=0,05). Encontrou-se diferenca estatistica entre os grupos (p=0,022). MC apresentou a maior media de carga de fratura, estatisticamente semelhante a YZ-C e diferente dos grupos IZ-C e IZ-S. Nao foi observada diferenca estatistica entre YZ-C, IZ-C e IZ-S. MC e YZ-C apresentaram como modo de falha lascamento da porcelana. Para IZ-C e IZ-S foram observados tanto lascamentos como fratura total, envolvendo a porcelana e a IE. O comportamento de fratura foi compativel com os relatados para falhas clinicas. Concluiu-se que as coroas de YZ-C e MC apresentam carga de fratura superior e comportamento de fratura mais favoravel do que as coroas de In-Ceram Zirconia, independente do tipo de fabricaçãoMade available in DSpace on 2018-01-10T18:08:00Z (GMT). No. of bitstreams: 1 2013QueliNunesSonza.pdf: 2903834 bytes, checksum: 100807831863a0d473c57e4ea349fb6d (MD5) Previous issue date: 2013-08-16application/pdfporUniversidade de Passo FundoPrograma de Pós-Graduação em OdontologiaUPFBRCiências da Saúde e Ciências BiológicasRestauração (Odontologia)Cerâmica odontológicaMateriais dentáriosDentes - Ferimentos e lesõesRestoration ( Dentistry)Dental ceramicsDental materialsTeeth - Wounds and injuriesCNPQ::CIENCIAS DA SAUDE::ODONTOLOGIAComportamento de fratura de sistemas para restaurações cerâmicasinfo:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/masterThesisinfo:eu-repo/semantics/openAccessreponame:Biblioteca de teses e dissertações da Universidade de Passo Fundo (BDTD UPF)instname:Universidade de Passo Fundo (UPF)instacron:UPFORIGINAL2013QueliNunesSonza.pdfapplication/pdf2903834http://tede.upf.br:8080/jspui/bitstream/tede/837/1/2013QueliNunesSonza.pdf100807831863a0d473c57e4ea349fb6dMD51tede/8372018-01-10 16:08:00.851oai:tede.upf.br:tede/837Biblioteca Digital de Teses e DissertaçõesPUBhttp://tede.upf.br/oai/requestbiblio@upf.br || bio@upf.br || cas@upf.br || car@upf.br || lve@upf.br || sar@upf.br || sol@upf.br || upfmundi@upf.br || jucelei@upf.bropendoar:2018-01-10T18:08Biblioteca de teses e dissertações da Universidade de Passo Fundo (BDTD UPF) - Universidade de Passo Fundo (UPF)false |
dc.title.por.fl_str_mv |
Comportamento de fratura de sistemas para restaurações cerâmicas |
title |
Comportamento de fratura de sistemas para restaurações cerâmicas |
spellingShingle |
Comportamento de fratura de sistemas para restaurações cerâmicas Sonza, Quéli Nunes Restauração (Odontologia) Cerâmica odontológica Materiais dentários Dentes - Ferimentos e lesões Restoration ( Dentistry) Dental ceramics Dental materials Teeth - Wounds and injuries CNPQ::CIENCIAS DA SAUDE::ODONTOLOGIA |
title_short |
Comportamento de fratura de sistemas para restaurações cerâmicas |
title_full |
Comportamento de fratura de sistemas para restaurações cerâmicas |
title_fullStr |
Comportamento de fratura de sistemas para restaurações cerâmicas |
title_full_unstemmed |
Comportamento de fratura de sistemas para restaurações cerâmicas |
title_sort |
Comportamento de fratura de sistemas para restaurações cerâmicas |
author |
Sonza, Quéli Nunes |
author_facet |
Sonza, Quéli Nunes |
author_role |
author |
dc.contributor.advisor1.fl_str_mv |
Borba, Márcia |
dc.contributor.advisor1ID.fl_str_mv |
CPF:99782944068 |
dc.contributor.advisor1Lattes.fl_str_mv |
http://lattes.cnpq.br/5230074566247388 |
dc.contributor.advisor-co1.fl_str_mv |
Bona, Álvaro Della |
dc.contributor.advisor-co1ID.fl_str_mv |
CPF:42784263053 |
dc.contributor.advisor-co1Lattes.fl_str_mv |
http://lattes.cnpq.br/7064579792237750 |
dc.contributor.authorID.fl_str_mv |
CPF:70279055072 |
dc.contributor.authorLattes.fl_str_mv |
http://lattes.cnpq.br/5268007521779481 |
dc.contributor.author.fl_str_mv |
Sonza, Quéli Nunes |
contributor_str_mv |
Borba, Márcia Bona, Álvaro Della |
dc.subject.por.fl_str_mv |
Restauração (Odontologia) Cerâmica odontológica Materiais dentários Dentes - Ferimentos e lesões |
topic |
Restauração (Odontologia) Cerâmica odontológica Materiais dentários Dentes - Ferimentos e lesões Restoration ( Dentistry) Dental ceramics Dental materials Teeth - Wounds and injuries CNPQ::CIENCIAS DA SAUDE::ODONTOLOGIA |
dc.subject.eng.fl_str_mv |
Restoration ( Dentistry) Dental ceramics Dental materials Teeth - Wounds and injuries |
dc.subject.cnpq.fl_str_mv |
CNPQ::CIENCIAS DA SAUDE::ODONTOLOGIA |
description |
Materials such as the alumina-based zircônia-reinforced glass-infiltrated ceramic (In-Ceram Zirconia) and the yttria partially stabilized tetragonal zirconia ceramic (Y-TZP) are considered the best options to replace metal frameworks (IE). However, the clinical behavior of these materials is still not clear. Thus, the objective of this study was to evaluate the effect of the type of IE material in the fracture behavior of prosthetic crowns. Specimens were fabricated using a metal die simulating a prepared tooth. Four groups were evaluated (n=10): YZ-C YTZP IE produced by CAD-CAM (In-Ceram YZ, Vita); IZ-C In-Ceram Zirconia (Vita) IE produced by CAD-CAM; IZ-S In-Ceram Zirconia (Vita) IE produced by slip-casting; MC metal IE (control). The IE were veneered with porcelain and cemented over the dies with resin cement. Specimens were tested until fracture using a universal testing machine with the compressive load being applied with a 30º angle by a spherical piston, in 37 ºC distilled water. Fractography was performed using a stereomicroscope and a SEM. Data were analyzed with Anova and Student-Newman-Keuls test (α=0.05). Significant differences were found between the groups (p=0.022). MC showed the highest mean fracture load, statistically similar to YZ-C and different from IZ-C and IZS groups. There was no statistical difference between YZ-C, IZ-C and IZ-S. MC and YZ-C showed, as failure mode, porcelain chipping. For IZ-C and IZ-S, both chipping and total failure, involving the porcelain and IE, were observed. The specimens fracture behavior was in agreement with the behavior reported for clinical failures. It was concluded that YZ-C and MC crowns present superior fracture load and a more favorable failure mode than In-Ceram Zircônia crowns, regardless of the fabrication type (CAD-CAM or slip-casting) |
publishDate |
2013 |
dc.date.issued.fl_str_mv |
2013-08-16 |
dc.date.available.fl_str_mv |
2015-09-21 |
dc.date.accessioned.fl_str_mv |
2018-01-10T18:08:00Z |
dc.type.status.fl_str_mv |
info:eu-repo/semantics/publishedVersion |
dc.type.driver.fl_str_mv |
info:eu-repo/semantics/masterThesis |
format |
masterThesis |
status_str |
publishedVersion |
dc.identifier.citation.fl_str_mv |
SONZA, Quéli Nunes. Comportamento de fratura de sistemas para restaurações cerâmicas. 2013. 133 f. Dissertação (Mestrado em Ciências da Saúde e Ciências Biológicas) - Universidade de Passo Fundo, Passo Fundo, 2013. |
dc.identifier.uri.fl_str_mv |
http://10.0.217.128:8080/jspui/handle/tede/837 |
identifier_str_mv |
SONZA, Quéli Nunes. Comportamento de fratura de sistemas para restaurações cerâmicas. 2013. 133 f. Dissertação (Mestrado em Ciências da Saúde e Ciências Biológicas) - Universidade de Passo Fundo, Passo Fundo, 2013. |
url |
http://10.0.217.128:8080/jspui/handle/tede/837 |
dc.language.iso.fl_str_mv |
por |
language |
por |
dc.rights.driver.fl_str_mv |
info:eu-repo/semantics/openAccess |
eu_rights_str_mv |
openAccess |
dc.format.none.fl_str_mv |
application/pdf |
dc.publisher.none.fl_str_mv |
Universidade de Passo Fundo |
dc.publisher.program.fl_str_mv |
Programa de Pós-Graduação em Odontologia |
dc.publisher.initials.fl_str_mv |
UPF |
dc.publisher.country.fl_str_mv |
BR |
dc.publisher.department.fl_str_mv |
Ciências da Saúde e Ciências Biológicas |
publisher.none.fl_str_mv |
Universidade de Passo Fundo |
dc.source.none.fl_str_mv |
reponame:Biblioteca de teses e dissertações da Universidade de Passo Fundo (BDTD UPF) instname:Universidade de Passo Fundo (UPF) instacron:UPF |
instname_str |
Universidade de Passo Fundo (UPF) |
instacron_str |
UPF |
institution |
UPF |
reponame_str |
Biblioteca de teses e dissertações da Universidade de Passo Fundo (BDTD UPF) |
collection |
Biblioteca de teses e dissertações da Universidade de Passo Fundo (BDTD UPF) |
bitstream.url.fl_str_mv |
http://tede.upf.br:8080/jspui/bitstream/tede/837/1/2013QueliNunesSonza.pdf |
bitstream.checksum.fl_str_mv |
100807831863a0d473c57e4ea349fb6d |
bitstream.checksumAlgorithm.fl_str_mv |
MD5 |
repository.name.fl_str_mv |
Biblioteca de teses e dissertações da Universidade de Passo Fundo (BDTD UPF) - Universidade de Passo Fundo (UPF) |
repository.mail.fl_str_mv |
biblio@upf.br || bio@upf.br || cas@upf.br || car@upf.br || lve@upf.br || sar@upf.br || sol@upf.br || upfmundi@upf.br || jucelei@upf.br |
_version_ |
1801045436051488768 |