Desenvolvimento e caracterização de blendas de polipropileno e polietileno modificadas por radiação gama
Autor(a) principal: | |
---|---|
Data de Publicação: | 2014 |
Tipo de documento: | Dissertação |
Idioma: | por |
Título da fonte: | Biblioteca Digital de Teses e Dissertações do Mackenzie |
Texto Completo: | http://dspace.mackenzie.br/handle/10899/24172 |
Resumo: | In the polymer industry the blends have become an interesting alternative to the technological field, therefore, added different properties in a shorter period of polymers developing. The high consumption and low cost of polyolefins, PP and PE, were responsible for the growing interest in many researches, aimed to improve the limitations of the PP. In addition, new needs for future interests emerged elimination of matter, since these two components are the main constituents of domestic waste and plastics recycling. The immiscibility of PP and PE has been discussed, according to the method used, the system may or may not be homogeneous. The γ radiation results in the formation of very reactive intermediate elements, which, applied to the blend compatibility component influences some properties and benefits. The objective of this study was characterize the blends of PP/LDPE and PP/HDPE with different concentrations, investigating the best combination of polymers before and after γ radiation. The material was irradiated with doses of 30kGy, 50kGy, 100kGy and 200kGy, at a fixed rate of 11.6 kGy/h and subsequently performed the tests of mechanical and thermomechanical resistance in order to observe its effects. It concluded that the changes were directly related to the factors: dose and concentration. For each type of combined, there was a specific result. The ionizing radiation change the compatibility of the components, promoting some properties of the blends, showing strong and economical materials. |
id |
UPM_520a7fc0a647f7fd7ea29e56486e2fd5 |
---|---|
oai_identifier_str |
oai:dspace.mackenzie.br:10899/24172 |
network_acronym_str |
UPM |
network_name_str |
Biblioteca Digital de Teses e Dissertações do Mackenzie |
repository_id_str |
10277 |
spelling |
2016-03-15T19:36:41Z2020-05-28T18:07:27Z2014-05-052020-05-28T18:07:27Z2014-02-07MOORI, Tatiana Mayumi. Desenvolvimento e caracterização de blendas de polipropileno e polietileno modificadas por radiação gama. 2014. 154 f. Dissertação (Mestrado em Engenharia de Materiais) - Universidade Presbiteriana Mackenzie, São Paulo, 2014.http://dspace.mackenzie.br/handle/10899/24172In the polymer industry the blends have become an interesting alternative to the technological field, therefore, added different properties in a shorter period of polymers developing. The high consumption and low cost of polyolefins, PP and PE, were responsible for the growing interest in many researches, aimed to improve the limitations of the PP. In addition, new needs for future interests emerged elimination of matter, since these two components are the main constituents of domestic waste and plastics recycling. The immiscibility of PP and PE has been discussed, according to the method used, the system may or may not be homogeneous. The γ radiation results in the formation of very reactive intermediate elements, which, applied to the blend compatibility component influences some properties and benefits. The objective of this study was characterize the blends of PP/LDPE and PP/HDPE with different concentrations, investigating the best combination of polymers before and after γ radiation. The material was irradiated with doses of 30kGy, 50kGy, 100kGy and 200kGy, at a fixed rate of 11.6 kGy/h and subsequently performed the tests of mechanical and thermomechanical resistance in order to observe its effects. It concluded that the changes were directly related to the factors: dose and concentration. For each type of combined, there was a specific result. The ionizing radiation change the compatibility of the components, promoting some properties of the blends, showing strong and economical materials.No setor polimérico as blendas passaram a ser uma interessante alternativa para o campo tecnológico, pois, agregaram propriedades de polímeros distintos em um menor prazo de desenvolvimento. O alto consumo e baixo custo das poliolefinas, PP e PE, foram responsáveis pelo crescente interesse em diversas pesquisas, almejando melhoria as limitações do PP. Além disso, novos interesses surgiram pelas necessidades futuras de eliminação da matéria, uma vez que estes dois componentes são os principais constituintes dos resíduos domésticos de plástico e de reciclagem. A imiscibilidade do PP e PE foi bastante discutida, pois, de acordo com o método de ensaio utilizado, o sistema pode ou não ser homogêneo. A radiação γ proporciona a formação de elementos intermediários muito reativos, do qual, aplicadas nas blendas influencia na compatibilidade dos componentes e beneficia algumas propriedades. Assim, o objetivo desse trabalho foi caracterizar as blendas de PP/PEBD e PP/PEAD com diferentes concentrações, investigando a melhor combinação dos polímeros antes e após a radiação γ. O material foi irradiado com doses de 30kGy; 50kGy; 100kGy e 200kGy, numa taxa fixa de 11,6 kGy/h e, posteriormente, realizou ensaios de resistência mecânica e termomecânica a fim de observar seus efeitos. Concluiu-se que as modificações ocorridas estavam, diretamente relacionadas aos fatores: dose e concentração. Para cada tipo de combinação observou-se um resultado específico. A radiação ionizante alterou a compatibilidade dos componentes, favorecendo algumas propriedades das blendas, revelando materiais resistentes e de baixo custo.IPEN - Instituto de Pesquisas Energéticas e Nuclearesapplication/pdfporUniversidade Presbiteriana MackenzieEngenharia de MateriaisUPMBREngenharia de Materiaisblendapolipropilenopolietilenoradiação gamablendpolypropylenepolyethylenegamma radiationCNPQ::ENGENHARIAS::ENGENHARIA DE MATERIAIS E METALURGICADesenvolvimento e caracterização de blendas de polipropileno e polietileno modificadas por radiação gamainfo:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/masterThesisTerence, Mauro Césarhttp://lattes.cnpq.br/0310437722311048Pereira, Nilson Casimirohttp://lattes.cnpq.br/0007203552115915Canavel, Valdirhttp://lattes.cnpq.br/1783773623480681http://lattes.cnpq.br/0814771331306318Moori, Tatiana Mayumihttp://tede.mackenzie.br/jspui/retrieve/3581/Tatiana%20Mayumi%20Moori.pdf.jpghttp://tede.mackenzie.br/jspui/bitstream/tede/1340/1/Tatiana%20Mayumi%20Moori.pdfinfo:eu-repo/semantics/openAccessreponame:Biblioteca Digital de Teses e Dissertações do Mackenzieinstname:Universidade Presbiteriana Mackenzie (MACKENZIE)instacron:MACKENZIE10899/241722020-05-28 15:07:27.644Biblioteca Digital de Teses e Dissertaçõeshttp://tede.mackenzie.br/jspui/PRI |
dc.title.por.fl_str_mv |
Desenvolvimento e caracterização de blendas de polipropileno e polietileno modificadas por radiação gama |
title |
Desenvolvimento e caracterização de blendas de polipropileno e polietileno modificadas por radiação gama |
spellingShingle |
Desenvolvimento e caracterização de blendas de polipropileno e polietileno modificadas por radiação gama Moori, Tatiana Mayumi blenda polipropileno polietileno radiação gama blend polypropylene polyethylene gamma radiation CNPQ::ENGENHARIAS::ENGENHARIA DE MATERIAIS E METALURGICA |
title_short |
Desenvolvimento e caracterização de blendas de polipropileno e polietileno modificadas por radiação gama |
title_full |
Desenvolvimento e caracterização de blendas de polipropileno e polietileno modificadas por radiação gama |
title_fullStr |
Desenvolvimento e caracterização de blendas de polipropileno e polietileno modificadas por radiação gama |
title_full_unstemmed |
Desenvolvimento e caracterização de blendas de polipropileno e polietileno modificadas por radiação gama |
title_sort |
Desenvolvimento e caracterização de blendas de polipropileno e polietileno modificadas por radiação gama |
author |
Moori, Tatiana Mayumi |
author_facet |
Moori, Tatiana Mayumi |
author_role |
author |
dc.contributor.advisor1.fl_str_mv |
Terence, Mauro César |
dc.contributor.advisor1Lattes.fl_str_mv |
http://lattes.cnpq.br/0310437722311048 |
dc.contributor.referee1.fl_str_mv |
Pereira, Nilson Casimiro |
dc.contributor.referee1Lattes.fl_str_mv |
http://lattes.cnpq.br/0007203552115915 |
dc.contributor.referee2.fl_str_mv |
Canavel, Valdir |
dc.contributor.referee2Lattes.fl_str_mv |
http://lattes.cnpq.br/1783773623480681 |
dc.contributor.authorLattes.fl_str_mv |
http://lattes.cnpq.br/0814771331306318 |
dc.contributor.author.fl_str_mv |
Moori, Tatiana Mayumi |
contributor_str_mv |
Terence, Mauro César Pereira, Nilson Casimiro Canavel, Valdir |
dc.subject.por.fl_str_mv |
blenda polipropileno polietileno radiação gama |
topic |
blenda polipropileno polietileno radiação gama blend polypropylene polyethylene gamma radiation CNPQ::ENGENHARIAS::ENGENHARIA DE MATERIAIS E METALURGICA |
dc.subject.eng.fl_str_mv |
blend polypropylene polyethylene gamma radiation |
dc.subject.cnpq.fl_str_mv |
CNPQ::ENGENHARIAS::ENGENHARIA DE MATERIAIS E METALURGICA |
description |
In the polymer industry the blends have become an interesting alternative to the technological field, therefore, added different properties in a shorter period of polymers developing. The high consumption and low cost of polyolefins, PP and PE, were responsible for the growing interest in many researches, aimed to improve the limitations of the PP. In addition, new needs for future interests emerged elimination of matter, since these two components are the main constituents of domestic waste and plastics recycling. The immiscibility of PP and PE has been discussed, according to the method used, the system may or may not be homogeneous. The γ radiation results in the formation of very reactive intermediate elements, which, applied to the blend compatibility component influences some properties and benefits. The objective of this study was characterize the blends of PP/LDPE and PP/HDPE with different concentrations, investigating the best combination of polymers before and after γ radiation. The material was irradiated with doses of 30kGy, 50kGy, 100kGy and 200kGy, at a fixed rate of 11.6 kGy/h and subsequently performed the tests of mechanical and thermomechanical resistance in order to observe its effects. It concluded that the changes were directly related to the factors: dose and concentration. For each type of combined, there was a specific result. The ionizing radiation change the compatibility of the components, promoting some properties of the blends, showing strong and economical materials. |
publishDate |
2014 |
dc.date.available.fl_str_mv |
2014-05-05 2020-05-28T18:07:27Z |
dc.date.issued.fl_str_mv |
2014-02-07 |
dc.date.accessioned.fl_str_mv |
2016-03-15T19:36:41Z 2020-05-28T18:07:27Z |
dc.type.status.fl_str_mv |
info:eu-repo/semantics/publishedVersion |
dc.type.driver.fl_str_mv |
info:eu-repo/semantics/masterThesis |
format |
masterThesis |
status_str |
publishedVersion |
dc.identifier.citation.fl_str_mv |
MOORI, Tatiana Mayumi. Desenvolvimento e caracterização de blendas de polipropileno e polietileno modificadas por radiação gama. 2014. 154 f. Dissertação (Mestrado em Engenharia de Materiais) - Universidade Presbiteriana Mackenzie, São Paulo, 2014. |
dc.identifier.uri.fl_str_mv |
http://dspace.mackenzie.br/handle/10899/24172 |
identifier_str_mv |
MOORI, Tatiana Mayumi. Desenvolvimento e caracterização de blendas de polipropileno e polietileno modificadas por radiação gama. 2014. 154 f. Dissertação (Mestrado em Engenharia de Materiais) - Universidade Presbiteriana Mackenzie, São Paulo, 2014. |
url |
http://dspace.mackenzie.br/handle/10899/24172 |
dc.language.iso.fl_str_mv |
por |
language |
por |
dc.rights.driver.fl_str_mv |
info:eu-repo/semantics/openAccess |
eu_rights_str_mv |
openAccess |
dc.format.none.fl_str_mv |
application/pdf |
dc.publisher.none.fl_str_mv |
Universidade Presbiteriana Mackenzie |
dc.publisher.program.fl_str_mv |
Engenharia de Materiais |
dc.publisher.initials.fl_str_mv |
UPM |
dc.publisher.country.fl_str_mv |
BR |
dc.publisher.department.fl_str_mv |
Engenharia de Materiais |
publisher.none.fl_str_mv |
Universidade Presbiteriana Mackenzie |
dc.source.none.fl_str_mv |
reponame:Biblioteca Digital de Teses e Dissertações do Mackenzie instname:Universidade Presbiteriana Mackenzie (MACKENZIE) instacron:MACKENZIE |
instname_str |
Universidade Presbiteriana Mackenzie (MACKENZIE) |
instacron_str |
MACKENZIE |
institution |
MACKENZIE |
reponame_str |
Biblioteca Digital de Teses e Dissertações do Mackenzie |
collection |
Biblioteca Digital de Teses e Dissertações do Mackenzie |
repository.name.fl_str_mv |
|
repository.mail.fl_str_mv |
|
_version_ |
1757177224588427264 |