Effect of light-curing units and activation mode on polymerization shrinkage and shrinkage stress of composite resins

Detalhes bibliográficos
Autor(a) principal: Lopes, Lawrence Gonzaga
Data de Publicação: 2008
Outros Autores: Franco, Eduardo Batista, Pereira, José Carlos, Mondelli, Rafael Francisco Lia
Tipo de documento: Artigo
Idioma: eng
Título da fonte: Journal of applied oral science (Online)
Texto Completo: https://www.revistas.usp.br/jaos/article/view/3535
Resumo: The aim of this study was to evaluate the polymerization shrinkage and shrinkage stress of composites polymerized with a LED and a quartz tungsten halogen (QTH) light sources. The LED was used in a conventional mode (CM) and the QTH was used in both conventional and pulse-delay modes (PD). The composite resins used were Z100, A110, SureFil and Bisfil 2B (chemical-cured). Composite deformation upon polymerization was measured by the strain gauge method. The shrinkage stress was measured by photoelastic analysis. The polymerization shrinkage data were analyzed statistically using two-way ANOVA and Tukey test (p
id USP-17_16bed1a78f743ee869507fc0a66c932c
oai_identifier_str oai:revistas.usp.br:article/3535
network_acronym_str USP-17
network_name_str Journal of applied oral science (Online)
repository_id_str
spelling Effect of light-curing units and activation mode on polymerization shrinkage and shrinkage stress of composite resins Dental materialsPolymerization shrinkageComposite resinsStressLight emitting diodeHalogen light The aim of this study was to evaluate the polymerization shrinkage and shrinkage stress of composites polymerized with a LED and a quartz tungsten halogen (QTH) light sources. The LED was used in a conventional mode (CM) and the QTH was used in both conventional and pulse-delay modes (PD). The composite resins used were Z100, A110, SureFil and Bisfil 2B (chemical-cured). Composite deformation upon polymerization was measured by the strain gauge method. The shrinkage stress was measured by photoelastic analysis. The polymerization shrinkage data were analyzed statistically using two-way ANOVA and Tukey test (pUniversidade de São Paulo. Faculdade de Odontologia de Bauru2008-02-01info:eu-repo/semantics/articleinfo:eu-repo/semantics/publishedVersionapplication/pdfhttps://www.revistas.usp.br/jaos/article/view/353510.1590/S1678-77572008000100008Journal of Applied Oral Science; Vol. 16 No. 1 (2008); 35-42 Journal of Applied Oral Science; Vol. 16 Núm. 1 (2008); 35-42 Journal of Applied Oral Science; v. 16 n. 1 (2008); 35-42 1678-77651678-7757reponame:Journal of applied oral science (Online)instname:Universidade de São Paulo (USP)instacron:USPenghttps://www.revistas.usp.br/jaos/article/view/3535/4225Copyright (c) 2008 Journal of Applied Oral Scienceinfo:eu-repo/semantics/openAccessLopes, Lawrence GonzagaFranco, Eduardo BatistaPereira, José CarlosMondelli, Rafael Francisco Lia2012-04-27T11:59:49Zoai:revistas.usp.br:article/3535Revistahttp://www.scielo.br/jaosPUBhttps://www.revistas.usp.br/jaos/oai||jaos@usp.br1678-77651678-7757opendoar:2012-04-27T11:59:49Journal of applied oral science (Online) - Universidade de São Paulo (USP)false
dc.title.none.fl_str_mv Effect of light-curing units and activation mode on polymerization shrinkage and shrinkage stress of composite resins
title Effect of light-curing units and activation mode on polymerization shrinkage and shrinkage stress of composite resins
spellingShingle Effect of light-curing units and activation mode on polymerization shrinkage and shrinkage stress of composite resins
Lopes, Lawrence Gonzaga
Dental materials
Polymerization shrinkage
Composite resins
Stress
Light emitting diode
Halogen light
title_short Effect of light-curing units and activation mode on polymerization shrinkage and shrinkage stress of composite resins
title_full Effect of light-curing units and activation mode on polymerization shrinkage and shrinkage stress of composite resins
title_fullStr Effect of light-curing units and activation mode on polymerization shrinkage and shrinkage stress of composite resins
title_full_unstemmed Effect of light-curing units and activation mode on polymerization shrinkage and shrinkage stress of composite resins
title_sort Effect of light-curing units and activation mode on polymerization shrinkage and shrinkage stress of composite resins
author Lopes, Lawrence Gonzaga
author_facet Lopes, Lawrence Gonzaga
Franco, Eduardo Batista
Pereira, José Carlos
Mondelli, Rafael Francisco Lia
author_role author
author2 Franco, Eduardo Batista
Pereira, José Carlos
Mondelli, Rafael Francisco Lia
author2_role author
author
author
dc.contributor.author.fl_str_mv Lopes, Lawrence Gonzaga
Franco, Eduardo Batista
Pereira, José Carlos
Mondelli, Rafael Francisco Lia
dc.subject.por.fl_str_mv Dental materials
Polymerization shrinkage
Composite resins
Stress
Light emitting diode
Halogen light
topic Dental materials
Polymerization shrinkage
Composite resins
Stress
Light emitting diode
Halogen light
description The aim of this study was to evaluate the polymerization shrinkage and shrinkage stress of composites polymerized with a LED and a quartz tungsten halogen (QTH) light sources. The LED was used in a conventional mode (CM) and the QTH was used in both conventional and pulse-delay modes (PD). The composite resins used were Z100, A110, SureFil and Bisfil 2B (chemical-cured). Composite deformation upon polymerization was measured by the strain gauge method. The shrinkage stress was measured by photoelastic analysis. The polymerization shrinkage data were analyzed statistically using two-way ANOVA and Tukey test (p
publishDate 2008
dc.date.none.fl_str_mv 2008-02-01
dc.type.driver.fl_str_mv info:eu-repo/semantics/article
info:eu-repo/semantics/publishedVersion
format article
status_str publishedVersion
dc.identifier.uri.fl_str_mv https://www.revistas.usp.br/jaos/article/view/3535
10.1590/S1678-77572008000100008
url https://www.revistas.usp.br/jaos/article/view/3535
identifier_str_mv 10.1590/S1678-77572008000100008
dc.language.iso.fl_str_mv eng
language eng
dc.relation.none.fl_str_mv https://www.revistas.usp.br/jaos/article/view/3535/4225
dc.rights.driver.fl_str_mv Copyright (c) 2008 Journal of Applied Oral Science
info:eu-repo/semantics/openAccess
rights_invalid_str_mv Copyright (c) 2008 Journal of Applied Oral Science
eu_rights_str_mv openAccess
dc.format.none.fl_str_mv application/pdf
dc.publisher.none.fl_str_mv Universidade de São Paulo. Faculdade de Odontologia de Bauru
publisher.none.fl_str_mv Universidade de São Paulo. Faculdade de Odontologia de Bauru
dc.source.none.fl_str_mv Journal of Applied Oral Science; Vol. 16 No. 1 (2008); 35-42
Journal of Applied Oral Science; Vol. 16 Núm. 1 (2008); 35-42
Journal of Applied Oral Science; v. 16 n. 1 (2008); 35-42
1678-7765
1678-7757
reponame:Journal of applied oral science (Online)
instname:Universidade de São Paulo (USP)
instacron:USP
instname_str Universidade de São Paulo (USP)
instacron_str USP
institution USP
reponame_str Journal of applied oral science (Online)
collection Journal of applied oral science (Online)
repository.name.fl_str_mv Journal of applied oral science (Online) - Universidade de São Paulo (USP)
repository.mail.fl_str_mv ||jaos@usp.br
_version_ 1800221673891299328