Systematic comparison between photonic sensors based on dielectrics and metals

Detalhes bibliográficos
Autor(a) principal: Soares, Rodrigo Romão França
Data de Publicação: 2020
Tipo de documento: Dissertação
Idioma: eng
Título da fonte: Biblioteca Digital de Teses e Dissertações da USP
Texto Completo: https://www.teses.usp.br/teses/disponiveis/18/18155/tde-12052023-100106/
Resumo: Photonic biosensors have gained much attention recently due to their high sensitivity, low energy consumption and miniaturization capability; in the near future, these sensors will form the basis of the so-called Lab on a Chip: a device capable of performing accurate clinical analyzes in a single chip and in any location, being of great help in countries with few resources for disease detection. There are several configurations for biophotonic sensors ranging from fiber-optic based systems, waveguides, resonators, to nanoparticles and photonic crystals, to name a few. In spite of this great diversity, constituted by dielectric or metallic media, these devices can be classified in two broad categories: those that require previous mode coupling and those that do not. The purpose of this dissertation is to study the devices of the second category, focusing on the so-called quasi-guided modes, presenting the physical phenomena involved and the main tools used to evaluate their performances. Therefore, using numerical simulations, present a comparative study between dielectric and metallic systems. Finally, a dielectric based biosensor is proposed, aiming on obtaining the similar performances of devices based on metal.
id USP_2471df536fd1dfc35d05f9bfec5ead6e
oai_identifier_str oai:teses.usp.br:tde-12052023-100106
network_acronym_str USP
network_name_str Biblioteca Digital de Teses e Dissertações da USP
repository_id_str 2721
spelling Systematic comparison between photonic sensors based on dielectrics and metalsComparação sistêmica entre sensores fotônicos baseados em dielétricos e metaisbiosensoresbiosensorscomparação sistêmicafotônicaphotonicssystemic comparisonPhotonic biosensors have gained much attention recently due to their high sensitivity, low energy consumption and miniaturization capability; in the near future, these sensors will form the basis of the so-called Lab on a Chip: a device capable of performing accurate clinical analyzes in a single chip and in any location, being of great help in countries with few resources for disease detection. There are several configurations for biophotonic sensors ranging from fiber-optic based systems, waveguides, resonators, to nanoparticles and photonic crystals, to name a few. In spite of this great diversity, constituted by dielectric or metallic media, these devices can be classified in two broad categories: those that require previous mode coupling and those that do not. The purpose of this dissertation is to study the devices of the second category, focusing on the so-called quasi-guided modes, presenting the physical phenomena involved and the main tools used to evaluate their performances. Therefore, using numerical simulations, present a comparative study between dielectric and metallic systems. Finally, a dielectric based biosensor is proposed, aiming on obtaining the similar performances of devices based on metal.Biosensores fotônicos tem ganhado muita atenção recentemente devido a sua alta sensitividade, baixo consumo de energia e capacidade de miniaturização; em um futuro próximo, esses sensores formarão a base do chamado Laboratório em um chip: um dispositivo capaz de executar com acurácia análises clínicas em um único chip e em qualquer local, sendo de grande ajuda a países com recursos escassos na detecção de doenças. Existem diversas configurações de sensores biofotônicos, variando desde sistemas baseados em fibras-óticas, guias de onda, ressonadores, até nanopartículas e cristais fotônicos, para nomear alguns. Apesar de sua grande diversidade, constituindo-se por meios dielétricos ou metálicos, esses dispositivos podem ser classificados, de modo geral, em duas categorias: os que requerem acoplamento prévio do modo e aquelas de não requerem. O intuito dessa dissertação é estudar esses dispositivos da segunda categoria, focando nos chamados modos quase-guiados, apresentando os fenômenos físicos envolvidos e as principais ferramentas de avaliação da sua performance. Portanto, utilizando de simulações numéricas, apresentar um estudo comparativo entre os sistemas dielétricos e metálicos. Por fim, propor um biosensor baseado em meio dielétrico, com objetivo de atingir rendimento similar aos dispositivos baseados em metais.Biblioteca Digitais de Teses e Dissertações da USPMartins, Emiliano RezendeSoares, Rodrigo Romão França2020-05-15info:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/masterThesisapplication/pdfhttps://www.teses.usp.br/teses/disponiveis/18/18155/tde-12052023-100106/reponame:Biblioteca Digital de Teses e Dissertações da USPinstname:Universidade de São Paulo (USP)instacron:USPLiberar o conteúdo para acesso público.info:eu-repo/semantics/openAccesseng2023-05-15T12:27:55Zoai:teses.usp.br:tde-12052023-100106Biblioteca Digital de Teses e Dissertaçõeshttp://www.teses.usp.br/PUBhttp://www.teses.usp.br/cgi-bin/mtd2br.plvirginia@if.usp.br|| atendimento@aguia.usp.br||virginia@if.usp.bropendoar:27212023-05-15T12:27:55Biblioteca Digital de Teses e Dissertações da USP - Universidade de São Paulo (USP)false
dc.title.none.fl_str_mv Systematic comparison between photonic sensors based on dielectrics and metals
Comparação sistêmica entre sensores fotônicos baseados em dielétricos e metais
title Systematic comparison between photonic sensors based on dielectrics and metals
spellingShingle Systematic comparison between photonic sensors based on dielectrics and metals
Soares, Rodrigo Romão França
biosensores
biosensors
comparação sistêmica
fotônica
photonics
systemic comparison
title_short Systematic comparison between photonic sensors based on dielectrics and metals
title_full Systematic comparison between photonic sensors based on dielectrics and metals
title_fullStr Systematic comparison between photonic sensors based on dielectrics and metals
title_full_unstemmed Systematic comparison between photonic sensors based on dielectrics and metals
title_sort Systematic comparison between photonic sensors based on dielectrics and metals
author Soares, Rodrigo Romão França
author_facet Soares, Rodrigo Romão França
author_role author
dc.contributor.none.fl_str_mv Martins, Emiliano Rezende
dc.contributor.author.fl_str_mv Soares, Rodrigo Romão França
dc.subject.por.fl_str_mv biosensores
biosensors
comparação sistêmica
fotônica
photonics
systemic comparison
topic biosensores
biosensors
comparação sistêmica
fotônica
photonics
systemic comparison
description Photonic biosensors have gained much attention recently due to their high sensitivity, low energy consumption and miniaturization capability; in the near future, these sensors will form the basis of the so-called Lab on a Chip: a device capable of performing accurate clinical analyzes in a single chip and in any location, being of great help in countries with few resources for disease detection. There are several configurations for biophotonic sensors ranging from fiber-optic based systems, waveguides, resonators, to nanoparticles and photonic crystals, to name a few. In spite of this great diversity, constituted by dielectric or metallic media, these devices can be classified in two broad categories: those that require previous mode coupling and those that do not. The purpose of this dissertation is to study the devices of the second category, focusing on the so-called quasi-guided modes, presenting the physical phenomena involved and the main tools used to evaluate their performances. Therefore, using numerical simulations, present a comparative study between dielectric and metallic systems. Finally, a dielectric based biosensor is proposed, aiming on obtaining the similar performances of devices based on metal.
publishDate 2020
dc.date.none.fl_str_mv 2020-05-15
dc.type.status.fl_str_mv info:eu-repo/semantics/publishedVersion
dc.type.driver.fl_str_mv info:eu-repo/semantics/masterThesis
format masterThesis
status_str publishedVersion
dc.identifier.uri.fl_str_mv https://www.teses.usp.br/teses/disponiveis/18/18155/tde-12052023-100106/
url https://www.teses.usp.br/teses/disponiveis/18/18155/tde-12052023-100106/
dc.language.iso.fl_str_mv eng
language eng
dc.relation.none.fl_str_mv
dc.rights.driver.fl_str_mv Liberar o conteúdo para acesso público.
info:eu-repo/semantics/openAccess
rights_invalid_str_mv Liberar o conteúdo para acesso público.
eu_rights_str_mv openAccess
dc.format.none.fl_str_mv application/pdf
dc.coverage.none.fl_str_mv
dc.publisher.none.fl_str_mv Biblioteca Digitais de Teses e Dissertações da USP
publisher.none.fl_str_mv Biblioteca Digitais de Teses e Dissertações da USP
dc.source.none.fl_str_mv
reponame:Biblioteca Digital de Teses e Dissertações da USP
instname:Universidade de São Paulo (USP)
instacron:USP
instname_str Universidade de São Paulo (USP)
instacron_str USP
institution USP
reponame_str Biblioteca Digital de Teses e Dissertações da USP
collection Biblioteca Digital de Teses e Dissertações da USP
repository.name.fl_str_mv Biblioteca Digital de Teses e Dissertações da USP - Universidade de São Paulo (USP)
repository.mail.fl_str_mv virginia@if.usp.br|| atendimento@aguia.usp.br||virginia@if.usp.br
_version_ 1809090647955603456

Registros relacionados