Assessment of Process Parameters by Friction Surfacing on the Double Layer Deposition
Autor(a) principal: | |
---|---|
Data de Publicação: | 2018 |
Outros Autores: | , , |
Tipo de documento: | Artigo |
Idioma: | eng |
Título da fonte: | Materials research (São Carlos. Online) |
Texto Completo: | http://old.scielo.br/scielo.php?script=sci_arttext&pid=S1516-14392018000300019 |
Resumo: | The friction surfacing process of two deposited layers on two deposition surface conditions, i.e., a smooth interface and a rough interface, was investigated. The control parameter of the deposition process was the rod feed rate with the use of a conventional milling machine. Analyzes of the surface characterization and microstructural characterization along the produced deposits were performed. The interface strength of the substrate/deposit1 (smooth) and deposit1/deposit2 (rough) was evaluated by bending tests and the micro-hardness profile along the transverse section of the substrate/deposit1 and deposit1/deposit2. The bending tests revealed the presence of smalls delaminations with no evidence of fracture at the rough deposit1/deposit2 interface (D1/D2) with less predominance in the deposition condition 3B. This suggests that the combination of the travel speed of 5.5 mm/s and an increase in the consumable rod feed rate of (≥5.5 mm/s) increases the adhesive strength of the two produced interfaces. |
id |
ABMABCABPOL-1_5138c9cfba052e692ad0316df1f61d07 |
---|---|
oai_identifier_str |
oai:scielo:S1516-14392018000300019 |
network_acronym_str |
ABMABCABPOL-1 |
network_name_str |
Materials research (São Carlos. Online) |
repository_id_str |
|
spelling |
Assessment of Process Parameters by Friction Surfacing on the Double Layer DepositionFriction surfacingProcess parametersDouble LayerDeposition roughnessMechanical anchorageConventional milling machineThe friction surfacing process of two deposited layers on two deposition surface conditions, i.e., a smooth interface and a rough interface, was investigated. The control parameter of the deposition process was the rod feed rate with the use of a conventional milling machine. Analyzes of the surface characterization and microstructural characterization along the produced deposits were performed. The interface strength of the substrate/deposit1 (smooth) and deposit1/deposit2 (rough) was evaluated by bending tests and the micro-hardness profile along the transverse section of the substrate/deposit1 and deposit1/deposit2. The bending tests revealed the presence of smalls delaminations with no evidence of fracture at the rough deposit1/deposit2 interface (D1/D2) with less predominance in the deposition condition 3B. This suggests that the combination of the travel speed of 5.5 mm/s and an increase in the consumable rod feed rate of (≥5.5 mm/s) increases the adhesive strength of the two produced interfaces.ABM, ABC, ABPol2018-01-01info:eu-repo/semantics/articleinfo:eu-repo/semantics/publishedVersiontext/htmlhttp://old.scielo.br/scielo.php?script=sci_arttext&pid=S1516-14392018000300019Materials Research v.21 n.3 2018reponame:Materials research (São Carlos. Online)instname:Universidade Federal de São Carlos (UFSCAR)instacron:ABM ABC ABPOL10.1590/1980-5373-mr-2018-0051info:eu-repo/semantics/openAccessGalvis,Juan CarlosOliveira,Pedro Henrique FernandesMartins,Juliana de PaulaCarvalho,André Luis Moreira deeng2018-05-10T00:00:00Zoai:scielo:S1516-14392018000300019Revistahttp://www.scielo.br/mrPUBhttps://old.scielo.br/oai/scielo-oai.phpdedz@power.ufscar.br1980-53731516-1439opendoar:2018-05-10T00:00Materials research (São Carlos. Online) - Universidade Federal de São Carlos (UFSCAR)false |
dc.title.none.fl_str_mv |
Assessment of Process Parameters by Friction Surfacing on the Double Layer Deposition |
title |
Assessment of Process Parameters by Friction Surfacing on the Double Layer Deposition |
spellingShingle |
Assessment of Process Parameters by Friction Surfacing on the Double Layer Deposition Galvis,Juan Carlos Friction surfacing Process parameters Double Layer Deposition roughness Mechanical anchorage Conventional milling machine |
title_short |
Assessment of Process Parameters by Friction Surfacing on the Double Layer Deposition |
title_full |
Assessment of Process Parameters by Friction Surfacing on the Double Layer Deposition |
title_fullStr |
Assessment of Process Parameters by Friction Surfacing on the Double Layer Deposition |
title_full_unstemmed |
Assessment of Process Parameters by Friction Surfacing on the Double Layer Deposition |
title_sort |
Assessment of Process Parameters by Friction Surfacing on the Double Layer Deposition |
author |
Galvis,Juan Carlos |
author_facet |
Galvis,Juan Carlos Oliveira,Pedro Henrique Fernandes Martins,Juliana de Paula Carvalho,André Luis Moreira de |
author_role |
author |
author2 |
Oliveira,Pedro Henrique Fernandes Martins,Juliana de Paula Carvalho,André Luis Moreira de |
author2_role |
author author author |
dc.contributor.author.fl_str_mv |
Galvis,Juan Carlos Oliveira,Pedro Henrique Fernandes Martins,Juliana de Paula Carvalho,André Luis Moreira de |
dc.subject.por.fl_str_mv |
Friction surfacing Process parameters Double Layer Deposition roughness Mechanical anchorage Conventional milling machine |
topic |
Friction surfacing Process parameters Double Layer Deposition roughness Mechanical anchorage Conventional milling machine |
description |
The friction surfacing process of two deposited layers on two deposition surface conditions, i.e., a smooth interface and a rough interface, was investigated. The control parameter of the deposition process was the rod feed rate with the use of a conventional milling machine. Analyzes of the surface characterization and microstructural characterization along the produced deposits were performed. The interface strength of the substrate/deposit1 (smooth) and deposit1/deposit2 (rough) was evaluated by bending tests and the micro-hardness profile along the transverse section of the substrate/deposit1 and deposit1/deposit2. The bending tests revealed the presence of smalls delaminations with no evidence of fracture at the rough deposit1/deposit2 interface (D1/D2) with less predominance in the deposition condition 3B. This suggests that the combination of the travel speed of 5.5 mm/s and an increase in the consumable rod feed rate of (≥5.5 mm/s) increases the adhesive strength of the two produced interfaces. |
publishDate |
2018 |
dc.date.none.fl_str_mv |
2018-01-01 |
dc.type.driver.fl_str_mv |
info:eu-repo/semantics/article |
dc.type.status.fl_str_mv |
info:eu-repo/semantics/publishedVersion |
format |
article |
status_str |
publishedVersion |
dc.identifier.uri.fl_str_mv |
http://old.scielo.br/scielo.php?script=sci_arttext&pid=S1516-14392018000300019 |
url |
http://old.scielo.br/scielo.php?script=sci_arttext&pid=S1516-14392018000300019 |
dc.language.iso.fl_str_mv |
eng |
language |
eng |
dc.relation.none.fl_str_mv |
10.1590/1980-5373-mr-2018-0051 |
dc.rights.driver.fl_str_mv |
info:eu-repo/semantics/openAccess |
eu_rights_str_mv |
openAccess |
dc.format.none.fl_str_mv |
text/html |
dc.publisher.none.fl_str_mv |
ABM, ABC, ABPol |
publisher.none.fl_str_mv |
ABM, ABC, ABPol |
dc.source.none.fl_str_mv |
Materials Research v.21 n.3 2018 reponame:Materials research (São Carlos. Online) instname:Universidade Federal de São Carlos (UFSCAR) instacron:ABM ABC ABPOL |
instname_str |
Universidade Federal de São Carlos (UFSCAR) |
instacron_str |
ABM ABC ABPOL |
institution |
ABM ABC ABPOL |
reponame_str |
Materials research (São Carlos. Online) |
collection |
Materials research (São Carlos. Online) |
repository.name.fl_str_mv |
Materials research (São Carlos. Online) - Universidade Federal de São Carlos (UFSCAR) |
repository.mail.fl_str_mv |
dedz@power.ufscar.br |
_version_ |
1754212674183364608 |