Influence of the Fraction of Comonomers and Diluents on the Preparation of Polymeric Microspheres Based on Poly (Methacrylic acid-co-divinylbenzene) Obtained by Precipitation Polymerization

Detalhes bibliográficos
Autor(a) principal: Piccaglia Neto,Mario
Data de Publicação: 2019
Outros Autores: Castanharo,Jacira Aparecida, Oliveira,Márcia Gomes de, Costa,Marcos Antonio da Silva
Tipo de documento: Artigo
Idioma: eng
Título da fonte: Materials research (São Carlos. Online)
Texto Completo: http://old.scielo.br/scielo.php?script=sci_arttext&pid=S1516-14392019000200201
Resumo: Abstract Preparation and characterization of polymeric microspheres based on poly(methacrylic acid-co-divinylbenzene) (P(MAA-co-DVB)) by precipitation polymerization are reported. The influence of the change in comonomer composition, crosslinking degree, ratio of total monomers/diluents by weight/volume (g/100 mL) and the volume ratio of diluents were studied. Spherical particles were obtained in the range from 1.42 to 8.41 µm. An increase in particle size and thermal resistance with decreasing molar fraction of methacrylic acid (MAA) were observed, associated with increases in critical chain length (CCL) and the number of crosslinks in this system, respectively. The analysis of particles with molar fraction of 50% MAA and acetonitrile/toluene volumetric ratio of 75/25 showed that larger particle size and yield were achieved with increasing ratio of total monomers/diluents (g / 100 mL). The particles prepared with 14% molar fraction of MAA obtained greater swelling ratios than the particles prepared with 50% MAA.
id ABMABCABPOL-1_dfbbf4188da457c3db70ed9cfd6397b0
oai_identifier_str oai:scielo:S1516-14392019000200201
network_acronym_str ABMABCABPOL-1
network_name_str Materials research (São Carlos. Online)
repository_id_str
spelling Influence of the Fraction of Comonomers and Diluents on the Preparation of Polymeric Microspheres Based on Poly (Methacrylic acid-co-divinylbenzene) Obtained by Precipitation PolymerizationPrecipitation polymerizationMicrospheresSwelling ratioAbstract Preparation and characterization of polymeric microspheres based on poly(methacrylic acid-co-divinylbenzene) (P(MAA-co-DVB)) by precipitation polymerization are reported. The influence of the change in comonomer composition, crosslinking degree, ratio of total monomers/diluents by weight/volume (g/100 mL) and the volume ratio of diluents were studied. Spherical particles were obtained in the range from 1.42 to 8.41 µm. An increase in particle size and thermal resistance with decreasing molar fraction of methacrylic acid (MAA) were observed, associated with increases in critical chain length (CCL) and the number of crosslinks in this system, respectively. The analysis of particles with molar fraction of 50% MAA and acetonitrile/toluene volumetric ratio of 75/25 showed that larger particle size and yield were achieved with increasing ratio of total monomers/diluents (g / 100 mL). The particles prepared with 14% molar fraction of MAA obtained greater swelling ratios than the particles prepared with 50% MAA.ABM, ABC, ABPol2019-01-01info:eu-repo/semantics/articleinfo:eu-repo/semantics/publishedVersiontext/htmlhttp://old.scielo.br/scielo.php?script=sci_arttext&pid=S1516-14392019000200201Materials Research v.22 n.2 2019reponame:Materials research (São Carlos. Online)instname:Universidade Federal de São Carlos (UFSCAR)instacron:ABM ABC ABPOL10.1590/1980-5373-mr-2017-0909info:eu-repo/semantics/openAccessPiccaglia Neto,MarioCastanharo,Jacira AparecidaOliveira,Márcia Gomes deCosta,Marcos Antonio da Silvaeng2018-12-18T00:00:00Zoai:scielo:S1516-14392019000200201Revistahttp://www.scielo.br/mrPUBhttps://old.scielo.br/oai/scielo-oai.phpdedz@power.ufscar.br1980-53731516-1439opendoar:2018-12-18T00:00Materials research (São Carlos. Online) - Universidade Federal de São Carlos (UFSCAR)false
dc.title.none.fl_str_mv Influence of the Fraction of Comonomers and Diluents on the Preparation of Polymeric Microspheres Based on Poly (Methacrylic acid-co-divinylbenzene) Obtained by Precipitation Polymerization
title Influence of the Fraction of Comonomers and Diluents on the Preparation of Polymeric Microspheres Based on Poly (Methacrylic acid-co-divinylbenzene) Obtained by Precipitation Polymerization
spellingShingle Influence of the Fraction of Comonomers and Diluents on the Preparation of Polymeric Microspheres Based on Poly (Methacrylic acid-co-divinylbenzene) Obtained by Precipitation Polymerization
Piccaglia Neto,Mario
Precipitation polymerization
Microspheres
Swelling ratio
title_short Influence of the Fraction of Comonomers and Diluents on the Preparation of Polymeric Microspheres Based on Poly (Methacrylic acid-co-divinylbenzene) Obtained by Precipitation Polymerization
title_full Influence of the Fraction of Comonomers and Diluents on the Preparation of Polymeric Microspheres Based on Poly (Methacrylic acid-co-divinylbenzene) Obtained by Precipitation Polymerization
title_fullStr Influence of the Fraction of Comonomers and Diluents on the Preparation of Polymeric Microspheres Based on Poly (Methacrylic acid-co-divinylbenzene) Obtained by Precipitation Polymerization
title_full_unstemmed Influence of the Fraction of Comonomers and Diluents on the Preparation of Polymeric Microspheres Based on Poly (Methacrylic acid-co-divinylbenzene) Obtained by Precipitation Polymerization
title_sort Influence of the Fraction of Comonomers and Diluents on the Preparation of Polymeric Microspheres Based on Poly (Methacrylic acid-co-divinylbenzene) Obtained by Precipitation Polymerization
author Piccaglia Neto,Mario
author_facet Piccaglia Neto,Mario
Castanharo,Jacira Aparecida
Oliveira,Márcia Gomes de
Costa,Marcos Antonio da Silva
author_role author
author2 Castanharo,Jacira Aparecida
Oliveira,Márcia Gomes de
Costa,Marcos Antonio da Silva
author2_role author
author
author
dc.contributor.author.fl_str_mv Piccaglia Neto,Mario
Castanharo,Jacira Aparecida
Oliveira,Márcia Gomes de
Costa,Marcos Antonio da Silva
dc.subject.por.fl_str_mv Precipitation polymerization
Microspheres
Swelling ratio
topic Precipitation polymerization
Microspheres
Swelling ratio
description Abstract Preparation and characterization of polymeric microspheres based on poly(methacrylic acid-co-divinylbenzene) (P(MAA-co-DVB)) by precipitation polymerization are reported. The influence of the change in comonomer composition, crosslinking degree, ratio of total monomers/diluents by weight/volume (g/100 mL) and the volume ratio of diluents were studied. Spherical particles were obtained in the range from 1.42 to 8.41 µm. An increase in particle size and thermal resistance with decreasing molar fraction of methacrylic acid (MAA) were observed, associated with increases in critical chain length (CCL) and the number of crosslinks in this system, respectively. The analysis of particles with molar fraction of 50% MAA and acetonitrile/toluene volumetric ratio of 75/25 showed that larger particle size and yield were achieved with increasing ratio of total monomers/diluents (g / 100 mL). The particles prepared with 14% molar fraction of MAA obtained greater swelling ratios than the particles prepared with 50% MAA.
publishDate 2019
dc.date.none.fl_str_mv 2019-01-01
dc.type.driver.fl_str_mv info:eu-repo/semantics/article
dc.type.status.fl_str_mv info:eu-repo/semantics/publishedVersion
format article
status_str publishedVersion
dc.identifier.uri.fl_str_mv http://old.scielo.br/scielo.php?script=sci_arttext&pid=S1516-14392019000200201
url http://old.scielo.br/scielo.php?script=sci_arttext&pid=S1516-14392019000200201
dc.language.iso.fl_str_mv eng
language eng
dc.relation.none.fl_str_mv 10.1590/1980-5373-mr-2017-0909
dc.rights.driver.fl_str_mv info:eu-repo/semantics/openAccess
eu_rights_str_mv openAccess
dc.format.none.fl_str_mv text/html
dc.publisher.none.fl_str_mv ABM, ABC, ABPol
publisher.none.fl_str_mv ABM, ABC, ABPol
dc.source.none.fl_str_mv Materials Research v.22 n.2 2019
reponame:Materials research (São Carlos. Online)
instname:Universidade Federal de São Carlos (UFSCAR)
instacron:ABM ABC ABPOL
instname_str Universidade Federal de São Carlos (UFSCAR)
instacron_str ABM ABC ABPOL
institution ABM ABC ABPOL
reponame_str Materials research (São Carlos. Online)
collection Materials research (São Carlos. Online)
repository.name.fl_str_mv Materials research (São Carlos. Online) - Universidade Federal de São Carlos (UFSCAR)
repository.mail.fl_str_mv dedz@power.ufscar.br
_version_ 1754212674317582336

Registros relacionados