Determination of selenium in bovine semen by ICP-MS using formic acid for sample preparation.

• Autor(a) principal: BIANCHI, S. R.
• Data de Publicação: 2017
• Outros Autores: AMARAL, C. D. B. do, SILVA, C. S. da, NOGUEIRA, A. R. de A.
• Tipo de documento: Artigo
• Idioma: eng
• Título da fonte: Repositório Institucional da EMBRAPA (Repository Open Access to Scientific Information from EMBRAPA - Alice)
• Texto Completo: http://www.alice.cnptia.embrapa.br/alice/handle/doc/1134629; http://dx.doi.org/10.21577/0103-5053.20170089
• topic: Bovine semen; Cattle fertility; selenium

Determination of Se by inductively coupled plasma mass spectrometry (ICP-MS) can be difficult due to spectral interferences; however, these interferences can be eliminated by using collision-reaction interface (CRI) technology. A simple and fast procedure for determination of total Se concentration in bovine semen by ICP-MS after sample solubilization with diluted formic acid is here proposed. Formic acid caused an increase of up to 50% in selenium net signals and the maximum gain was obtained at 10% v v-1 formic acid solution. The optimized nebulizer gas flow rates were 1.05 and 0.95 L min-1, and radio frequency applied power were 1.3 and 1.4 kW without and with CRI, respectively. Microwave-assisted acid digestion was also implemented in the preparation of semen sample for comparison of results. No statistical differences between these sample preparation strategies at 95% confidence level (t-test) were observed for 76Se+ , 77Se+ , 78Se+ and 82Se+ without using CRI and 82Se+ with CRI.