Wax-based binder for low-ressure injection molding and the robust production of ceramic parts
Autor(a) principal: | |
---|---|
Data de Publicação: | 2003 |
Outros Autores: | , |
Tipo de documento: | Artigo |
Idioma: | eng |
Título da fonte: | Repositório Institucional do INMETRO |
Texto Completo: | http://hdl.handle.net/10926/1405 |
Resumo: | In this paper, a wax-based binder was developed for low-pressure injection molding of very fine (0,4 μm) average particle size alumina ceramic bodies. The major component used in the binder mixture was paraffin wax. The process of binder removal from the green ceramics presented several difficulties especially when the ceramic powder was very fine, and the pieces had large cross-section. The process used for debinding was wicking in an alumina powder bed of the same powder. With the binder formulation presented here, and the optimization of the ramps and dwells furnace programmation for the debinding, it was possible to produce sintered alumina bodies with large crosssection and 98.5% of the theoretical density, free of defects. |
id |
INMT_c9907922bbd6c0f80409eac83ba45976 |
---|---|
oai_identifier_str |
oai:xrepo01s.inmetro.gov.br:10926/1405 |
network_acronym_str |
INMT |
network_name_str |
Repositório Institucional do INMETRO |
repository_id_str |
|
spelling |
info:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/articleWax-based binder for low-ressure injection molding and the robust production of ceramic parts20032012-01-31T17:03:30Z2012-01-31T17:03:30ZIn this paper, a wax-based binder was developed for low-pressure injection molding of very fine (0,4 μm) average particle size alumina ceramic bodies. The major component used in the binder mixture was paraffin wax. The process of binder removal from the green ceramics presented several difficulties especially when the ceramic powder was very fine, and the pieces had large cross-section. The process used for debinding was wicking in an alumina powder bed of the same powder. With the binder formulation presented here, and the optimization of the ramps and dwells furnace programmation for the debinding, it was possible to produce sintered alumina bodies with large crosssection and 98.5% of the theoretical density, free of defects.13 p. : il.Submitted by Josivania Barbosa (josi.inmetro@yahoo.com.br) on 2012-01-20T13:34:25Z No. of bitstreams: 1 Jornada1_2003.pdf: 165888 bytes, checksum: fd1d1cae062737937604ce8c4421b0b6 (MD5)Approved for entry into archive by Catarina Soares(cfsoares@inmetro.gov.br) on 2012-01-31T17:03:30Z (GMT) No. of bitstreams: 1 Jornada1_2003.pdf: 165888 bytes, checksum: fd1d1cae062737937604ce8c4421b0b6 (MD5)Made available in DSpace on 2012-01-31T17:03:30Z (GMT). No. of bitstreams: 1 Jornada1_2003.pdf: 165888 bytes, checksum: fd1d1cae062737937604ce8c4421b0b6 (MD5) Previous issue date: 2003enghttp://hdl.handle.net/10926/1405DMD_hdl_10926/1405ZORZI, J. E.; PEROTTONI, C. A.; JORNADA, J. A. H. da. Wax-based binder for low-pressure injection molding and the robust production of ceramic parts. [Industrial Ceramics], [v. 23], n. 1, p. 47-49, 2003.Zorzi, Janete EunicePerottoni, Cláudio AntônioJornada, João Alziro Herz dainfo:eu-repo/semantics/openAccessreponame:Repositório Institucional do INMETROinstname:Instituto Nacional de Metrologia, Qualidade e Tecnologia (INMETRO)instacron:INMETROZorzi_2003.pdfhttp://xrepo01s.inmetro.gov.br/bitstream/10926/1405/1/Zorzi_2003.pdfapplication/pdf165888http://xrepo01s.inmetro.gov.br/bitstream/10926/1405/1/Zorzi_2003.pdffd1d1cae062737937604ce8c4421b0b6MD510926_1405_1Zorzi_2003.pdf.txthttp://xrepo01s.inmetro.gov.br/bitstream/10926/1405/6/Zorzi_2003.pdf.txttext/plain11551http://xrepo01s.inmetro.gov.br/bitstream/10926/1405/6/Zorzi_2003.pdf.txtb6b4699c03b9aee5e7cfe9ccbca9c1a2MD510926_1405_62024-06-10T15:24:42Zoai:xrepo01s.inmetro.gov.br:10926/1405Repositório de Publicaçõeshttp://repositorios.inmetro.gov.br/oai/requestopendoar:2012-11-30T12:51:19Repositório Institucional do INMETRO - Instituto Nacional de Metrologia, Qualidade e Tecnologia (INMETRO)false |
dc.title.none.fl_str_mv |
Wax-based binder for low-ressure injection molding and the robust production of ceramic parts |
title |
Wax-based binder for low-ressure injection molding and the robust production of ceramic parts |
spellingShingle |
Wax-based binder for low-ressure injection molding and the robust production of ceramic parts Zorzi, Janete Eunice |
title_short |
Wax-based binder for low-ressure injection molding and the robust production of ceramic parts |
title_full |
Wax-based binder for low-ressure injection molding and the robust production of ceramic parts |
title_fullStr |
Wax-based binder for low-ressure injection molding and the robust production of ceramic parts |
title_full_unstemmed |
Wax-based binder for low-ressure injection molding and the robust production of ceramic parts |
title_sort |
Wax-based binder for low-ressure injection molding and the robust production of ceramic parts |
author |
Zorzi, Janete Eunice |
author_facet |
Zorzi, Janete Eunice Perottoni, Cláudio Antônio Jornada, João Alziro Herz da |
author_role |
author |
author2 |
Perottoni, Cláudio Antônio Jornada, João Alziro Herz da |
author2_role |
author author |
dc.contributor.author.fl_str_mv |
Zorzi, Janete Eunice Perottoni, Cláudio Antônio Jornada, João Alziro Herz da |
description |
In this paper, a wax-based binder was developed for low-pressure injection molding of very fine (0,4 μm) average particle size alumina ceramic bodies. The major component used in the binder mixture was paraffin wax. The process of binder removal from the green ceramics presented several difficulties especially when the ceramic powder was very fine, and the pieces had large cross-section. The process used for debinding was wicking in an alumina powder bed of the same powder. With the binder formulation presented here, and the optimization of the ramps and dwells furnace programmation for the debinding, it was possible to produce sintered alumina bodies with large crosssection and 98.5% of the theoretical density, free of defects. |
publishDate |
2003 |
dc.date.issued.fl_str_mv |
2003 |
dc.date.available.fl_str_mv |
2012-01-31T17:03:30Z |
dc.date.accessioned.fl_str_mv |
2012-01-31T17:03:30Z |
dc.type.status.fl_str_mv |
info:eu-repo/semantics/publishedVersion |
dc.type.driver.fl_str_mv |
info:eu-repo/semantics/article |
format |
article |
status_str |
publishedVersion |
dc.identifier.uri.fl_str_mv |
http://hdl.handle.net/10926/1405 DMD_hdl_10926/1405 |
dc.identifier.citation.fl_str_mv |
ZORZI, J. E.; PEROTTONI, C. A.; JORNADA, J. A. H. da. Wax-based binder for low-pressure injection molding and the robust production of ceramic parts. [Industrial Ceramics], [v. 23], n. 1, p. 47-49, 2003. |
url |
http://hdl.handle.net/10926/1405 |
identifier_str_mv |
DMD_hdl_10926/1405 ZORZI, J. E.; PEROTTONI, C. A.; JORNADA, J. A. H. da. Wax-based binder for low-pressure injection molding and the robust production of ceramic parts. [Industrial Ceramics], [v. 23], n. 1, p. 47-49, 2003. |
dc.language.iso.fl_str_mv |
eng |
language |
eng |
dc.rights.driver.fl_str_mv |
info:eu-repo/semantics/openAccess |
eu_rights_str_mv |
openAccess |
dc.format.bitstream.fl_str_mv |
application/pdf text/plain |
dc.source.none.fl_str_mv |
reponame:Repositório Institucional do INMETRO instname:Instituto Nacional de Metrologia, Qualidade e Tecnologia (INMETRO) instacron:INMETRO |
instname_str |
Instituto Nacional de Metrologia, Qualidade e Tecnologia (INMETRO) |
instacron_str |
INMETRO |
institution |
INMETRO |
reponame_str |
Repositório Institucional do INMETRO |
collection |
Repositório Institucional do INMETRO |
repository.name.fl_str_mv |
Repositório Institucional do INMETRO - Instituto Nacional de Metrologia, Qualidade e Tecnologia (INMETRO) |
repository.mail.fl_str_mv |
|
_version_ |
1801499965682352128 |