The effect of thermo-cycling on flexural strength of laboratorial resins

• Autor(a) principal: Oliveira, Karla Mychellyne Costa
• Data de Publicação: 2008
• Outros Autores: Castilho, Anderson Almeida, Marocho, Susana María Salazar, Pereira, Sarina Maciel Braga, Vásquez, Vanessa Zulema Ccahuana, Bottino, Marco Antonio
• Tipo de documento: Artigo
• Idioma: eng
• Título da fonte: Revista odonto ciência (Online)
• Texto Completo: https://revistaseletronicas.pucrs.br/ojs/index.php/fo/article/view/2448
• topic: three point bending; thermo-cycling; composite resin; Indirect dental composites

Introduction: A new laboratorial resin generation that content ceramic microparticles in its composition has been introduced in the market with the purpose to improve its mechanical properties. Objective: The objective of this study was to evaluate the effect of the thermocycling in the flexural strength of three laboratorial resins. Method: Forty-eight specimens with measures of 2 mm × 2 mm × 25 mm were made using laboratorial resins: G1 - RESILAB MASTER (Wilcos, Brazil), G2 - VITA VM LC (Vita Zanhfabrik, Germany) and G3 - VITA ZETA (Vita Zanhfabrik, Germany). After their confection, half of each group was submitted to 3000 thermal-cycles (5ºC/55ºC ± 1, with rinse bath of 30 s). The mechanical essays were done in Universal essay machine EMIC with the loading capacity of 100 kg and the equispeed of 0,5 mm/min. Results: The obtained data was analyzed statistically by the ANOVA test (two-way) and Turkey’s test (p < 0,05). The averages (± DP) observed for the groups without cycles were: G1(112,6 ± 25,39), G2(116,5 ± 18,51) and G3(136,1 ± 24,34); and for the groups with cycles: G1(91,8 ± 18,86), G2(101,9 ± 20,61) and G3 89,9 ± 23,05). Conclusion: It was concluded that the decrease in the flexural strength in MPa is directly dependent on the thermo-cycling in the tested groups, being that the highest values were obtained by VM LC resin. However, in the group without thermo-cycling the VITA ZETA showed the highest values. UNITERMS: three point bending; thermo-cycling; composite resin.