Desempenho e conformidade de biossorventes produzidos a partir de resíduos florestais e sua aplicação no tratamento de cromo de efluente industrial de galvanoplastia
Autor(a) principal: | |
---|---|
Data de Publicação: | 2013 |
Tipo de documento: | Tese |
Idioma: | por |
Título da fonte: | Biblioteca Digital de Teses e Dissertações da PUC_RS |
Texto Completo: | http://tede2.pucrs.br/tede2/handle/tede/3242 |
Resumo: | The removal of chromium from effluents is usually done by chemical precipitation. Although relatively simple and economical, this process produces a large amount of sludge and furthermore, it may be necessary to apply a final polishing of the effluent to attain the emission limits. The treatment process by adsorption is an alternative method for removing metals, which conventionally is used the activated carbon, however this method is costly and can unfeasible your use. Thus, the main objective of this study is to develop a method suitable for use of forest residues from araucaria, pine and eucalyptus as biosorbents chromium from electroplating industrial effluent. The biosorbents used in the tests were prepared and characterized in powder form unwashed, powder subjected to washing and its aqueous extracts. The concentrations of Cr(VI) and Cr(III), as well as parameters of conformity were analyzed before and after treatment. The biosorption tests were performed in batch, continuous and mixed system (batch followed by mixed system), with dilute solutions containing Cr(VI) and Cr(III) and also with the effluent. The final destination of chromium adsorbed on solids was also studied. The results show that the method of biosorption, employed in this study, has the ability to remove chromium solutions / effluent, attain environmental limits. The pine is distinguished as the best biosorbent total chromium and eucalyptus produces the best extracts to reduce Cr(VI). Incineration is the most viable alternative for recovery of chromium adsorbed on biosorbents. The low cost, quantity and ease of preparation of biosorbents attending the conformities of use, should be taken into account when comparing feasibility of application. |
id |
P_RS_74e9cfd742f899e6b80c3c4b307fccea |
---|---|
oai_identifier_str |
oai:tede2.pucrs.br:tede/3242 |
network_acronym_str |
P_RS |
network_name_str |
Biblioteca Digital de Teses e Dissertações da PUC_RS |
repository_id_str |
|
spelling |
Pires, Marçal José RodriguesCPF:43283810087http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4787820D9CPF:70488258049http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4770576H2Santos, Fernanda Abreu dos2015-04-14T13:59:01Z2013-10-042013-08-06SANTOS, Fernanda Abreu dos. Desempenho e conformidade de biossorventes produzidos a partir de resíduos florestais e sua aplicação no tratamento de cromo de efluente industrial de galvanoplastia. 2013. 241 f. Tese (Doutorado em Engenharia e Tecnologia de Materiais) - Pontifícia Universidade Católica do Rio Grande do Sul, Porto Alegre, 2013.http://tede2.pucrs.br/tede2/handle/tede/3242The removal of chromium from effluents is usually done by chemical precipitation. Although relatively simple and economical, this process produces a large amount of sludge and furthermore, it may be necessary to apply a final polishing of the effluent to attain the emission limits. The treatment process by adsorption is an alternative method for removing metals, which conventionally is used the activated carbon, however this method is costly and can unfeasible your use. Thus, the main objective of this study is to develop a method suitable for use of forest residues from araucaria, pine and eucalyptus as biosorbents chromium from electroplating industrial effluent. The biosorbents used in the tests were prepared and characterized in powder form unwashed, powder subjected to washing and its aqueous extracts. The concentrations of Cr(VI) and Cr(III), as well as parameters of conformity were analyzed before and after treatment. The biosorption tests were performed in batch, continuous and mixed system (batch followed by mixed system), with dilute solutions containing Cr(VI) and Cr(III) and also with the effluent. The final destination of chromium adsorbed on solids was also studied. The results show that the method of biosorption, employed in this study, has the ability to remove chromium solutions / effluent, attain environmental limits. The pine is distinguished as the best biosorbent total chromium and eucalyptus produces the best extracts to reduce Cr(VI). Incineration is the most viable alternative for recovery of chromium adsorbed on biosorbents. The low cost, quantity and ease of preparation of biosorbents attending the conformities of use, should be taken into account when comparing feasibility of application.A remoção de cromo de efluentes geralmente é feita através da precipitação química. Embora seja relativamente simples e econômico, esse processo gera grande volume de lodo, e em alguns casos, é necessária a aplicação de um polimento final do efluente para atingir os limites de emissão. No processo de tratamento por adsorção, para a remoção de metais, convencionalmente é utilizado o carvão ativado, entretanto é de alto custo e pode inviabilizar seu uso. Desta forma, o objetivo principal deste trabalho é desenvolver um método apropriado para uso dos resíduos florestais oriundos da araucária, pinus e eucalipto como biossorventes de cromo de efluente industrial de galvanoplastia. Os biossorventes usados nos testes foram preparados e caracterizados sob forma de pó não lavado, pó submetido à lavagem e seus extratos aquosos. As concentrações de Cr(VI) e Cr(III), bem como parâmetros de conformidade, foram analisados antes e após o tratamento. Os testes de biossorção foram realizados em batelada, fluxo contínuo e sistema misto (batelada seguido de fluxo contínuo), com soluções diluídas contendo Cr(VI) e Cr(III) e também com o efluente industrial. Também foi estudada a destinação final do cromo adsorvido nos sólidos. Os resultados apontam que o método de biossorção, empregado neste estudo, tem capacidade de remover cromo das soluções/efluente, atendendo os limites ambientais. O pinus destaca-se como o melhor biossorvente de cromo total e o eucalipto produz o melhor extrato para a redução do Cr(VI). A incineração é a alternativa mais viável para recuperação do cromo adsorvido nos biossorventes. O baixo custo, a quantidade e a facilidade de preparação dos biossorventes atendendo as conformidades de uso, devem ser levados em conta na comparação de viabilidade de aplicação.Made available in DSpace on 2015-04-14T13:59:01Z (GMT). No. of bitstreams: 1 451351.pdf: 4610584 bytes, checksum: 7eaa5f03071c1e8bf740f642f617913b (MD5) Previous issue date: 2013-08-06application/pdfhttp://tede2.pucrs.br:80/tede2/retrieve/11620/451351.pdf.jpgporPontifícia Universidade Católica do Rio Grande do SulPrograma de Pós-Graduação em Engenharia e Tecnologia de MateriaisPUCRSBRFaculdade de EngenhariaENGENHARIA DE MATERIAISPRODUTOS QUÍMICOSCROMO - ASPECTOS AMBIENTAISRESÍDUOS - TRATAMENTOCNPQ::ENGENHARIASDesempenho e conformidade de biossorventes produzidos a partir de resíduos florestais e sua aplicação no tratamento de cromo de efluente industrial de galvanoplastiainfo:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/doctoralThesis-7432719344215120122500600-655770572761439785info:eu-repo/semantics/openAccessreponame:Biblioteca Digital de Teses e Dissertações da PUC_RSinstname:Pontifícia Universidade Católica do Rio Grande do Sul (PUCRS)instacron:PUC_RSTHUMBNAIL451351.pdf.jpg451351.pdf.jpgimage/jpeg4201http://tede2.pucrs.br/tede2/bitstream/tede/3242/3/451351.pdf.jpg184e1619b8019f2186a3306f812e87c5MD53TEXT451351.pdf.txt451351.pdf.txttext/plain320968http://tede2.pucrs.br/tede2/bitstream/tede/3242/2/451351.pdf.txt513a6f9907b156320e0b0ef9dd80e307MD52ORIGINAL451351.pdfapplication/pdf4610584http://tede2.pucrs.br/tede2/bitstream/tede/3242/1/451351.pdf7eaa5f03071c1e8bf740f642f617913bMD51tede/32422015-04-17 16:09:31.256oai:tede2.pucrs.br:tede/3242Biblioteca Digital de Teses e Dissertaçõeshttp://tede2.pucrs.br/tede2/PRIhttps://tede2.pucrs.br/oai/requestbiblioteca.central@pucrs.br||opendoar:2015-04-17T19:09:31Biblioteca Digital de Teses e Dissertações da PUC_RS - Pontifícia Universidade Católica do Rio Grande do Sul (PUCRS)false |
dc.title.por.fl_str_mv |
Desempenho e conformidade de biossorventes produzidos a partir de resíduos florestais e sua aplicação no tratamento de cromo de efluente industrial de galvanoplastia |
title |
Desempenho e conformidade de biossorventes produzidos a partir de resíduos florestais e sua aplicação no tratamento de cromo de efluente industrial de galvanoplastia |
spellingShingle |
Desempenho e conformidade de biossorventes produzidos a partir de resíduos florestais e sua aplicação no tratamento de cromo de efluente industrial de galvanoplastia Santos, Fernanda Abreu dos ENGENHARIA DE MATERIAIS PRODUTOS QUÍMICOS CROMO - ASPECTOS AMBIENTAIS RESÍDUOS - TRATAMENTO CNPQ::ENGENHARIAS |
title_short |
Desempenho e conformidade de biossorventes produzidos a partir de resíduos florestais e sua aplicação no tratamento de cromo de efluente industrial de galvanoplastia |
title_full |
Desempenho e conformidade de biossorventes produzidos a partir de resíduos florestais e sua aplicação no tratamento de cromo de efluente industrial de galvanoplastia |
title_fullStr |
Desempenho e conformidade de biossorventes produzidos a partir de resíduos florestais e sua aplicação no tratamento de cromo de efluente industrial de galvanoplastia |
title_full_unstemmed |
Desempenho e conformidade de biossorventes produzidos a partir de resíduos florestais e sua aplicação no tratamento de cromo de efluente industrial de galvanoplastia |
title_sort |
Desempenho e conformidade de biossorventes produzidos a partir de resíduos florestais e sua aplicação no tratamento de cromo de efluente industrial de galvanoplastia |
author |
Santos, Fernanda Abreu dos |
author_facet |
Santos, Fernanda Abreu dos |
author_role |
author |
dc.contributor.advisor1.fl_str_mv |
Pires, Marçal José Rodrigues |
dc.contributor.advisor1ID.fl_str_mv |
CPF:43283810087 |
dc.contributor.advisor1Lattes.fl_str_mv |
http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4787820D9 |
dc.contributor.authorID.fl_str_mv |
CPF:70488258049 |
dc.contributor.authorLattes.fl_str_mv |
http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4770576H2 |
dc.contributor.author.fl_str_mv |
Santos, Fernanda Abreu dos |
contributor_str_mv |
Pires, Marçal José Rodrigues |
dc.subject.por.fl_str_mv |
ENGENHARIA DE MATERIAIS PRODUTOS QUÍMICOS CROMO - ASPECTOS AMBIENTAIS RESÍDUOS - TRATAMENTO |
topic |
ENGENHARIA DE MATERIAIS PRODUTOS QUÍMICOS CROMO - ASPECTOS AMBIENTAIS RESÍDUOS - TRATAMENTO CNPQ::ENGENHARIAS |
dc.subject.cnpq.fl_str_mv |
CNPQ::ENGENHARIAS |
description |
The removal of chromium from effluents is usually done by chemical precipitation. Although relatively simple and economical, this process produces a large amount of sludge and furthermore, it may be necessary to apply a final polishing of the effluent to attain the emission limits. The treatment process by adsorption is an alternative method for removing metals, which conventionally is used the activated carbon, however this method is costly and can unfeasible your use. Thus, the main objective of this study is to develop a method suitable for use of forest residues from araucaria, pine and eucalyptus as biosorbents chromium from electroplating industrial effluent. The biosorbents used in the tests were prepared and characterized in powder form unwashed, powder subjected to washing and its aqueous extracts. The concentrations of Cr(VI) and Cr(III), as well as parameters of conformity were analyzed before and after treatment. The biosorption tests were performed in batch, continuous and mixed system (batch followed by mixed system), with dilute solutions containing Cr(VI) and Cr(III) and also with the effluent. The final destination of chromium adsorbed on solids was also studied. The results show that the method of biosorption, employed in this study, has the ability to remove chromium solutions / effluent, attain environmental limits. The pine is distinguished as the best biosorbent total chromium and eucalyptus produces the best extracts to reduce Cr(VI). Incineration is the most viable alternative for recovery of chromium adsorbed on biosorbents. The low cost, quantity and ease of preparation of biosorbents attending the conformities of use, should be taken into account when comparing feasibility of application. |
publishDate |
2013 |
dc.date.available.fl_str_mv |
2013-10-04 |
dc.date.issued.fl_str_mv |
2013-08-06 |
dc.date.accessioned.fl_str_mv |
2015-04-14T13:59:01Z |
dc.type.status.fl_str_mv |
info:eu-repo/semantics/publishedVersion |
dc.type.driver.fl_str_mv |
info:eu-repo/semantics/doctoralThesis |
format |
doctoralThesis |
status_str |
publishedVersion |
dc.identifier.citation.fl_str_mv |
SANTOS, Fernanda Abreu dos. Desempenho e conformidade de biossorventes produzidos a partir de resíduos florestais e sua aplicação no tratamento de cromo de efluente industrial de galvanoplastia. 2013. 241 f. Tese (Doutorado em Engenharia e Tecnologia de Materiais) - Pontifícia Universidade Católica do Rio Grande do Sul, Porto Alegre, 2013. |
dc.identifier.uri.fl_str_mv |
http://tede2.pucrs.br/tede2/handle/tede/3242 |
identifier_str_mv |
SANTOS, Fernanda Abreu dos. Desempenho e conformidade de biossorventes produzidos a partir de resíduos florestais e sua aplicação no tratamento de cromo de efluente industrial de galvanoplastia. 2013. 241 f. Tese (Doutorado em Engenharia e Tecnologia de Materiais) - Pontifícia Universidade Católica do Rio Grande do Sul, Porto Alegre, 2013. |
url |
http://tede2.pucrs.br/tede2/handle/tede/3242 |
dc.language.iso.fl_str_mv |
por |
language |
por |
dc.relation.program.fl_str_mv |
-7432719344215120122 |
dc.relation.confidence.fl_str_mv |
500 600 |
dc.relation.department.fl_str_mv |
-655770572761439785 |
dc.rights.driver.fl_str_mv |
info:eu-repo/semantics/openAccess |
eu_rights_str_mv |
openAccess |
dc.format.none.fl_str_mv |
application/pdf |
dc.publisher.none.fl_str_mv |
Pontifícia Universidade Católica do Rio Grande do Sul |
dc.publisher.program.fl_str_mv |
Programa de Pós-Graduação em Engenharia e Tecnologia de Materiais |
dc.publisher.initials.fl_str_mv |
PUCRS |
dc.publisher.country.fl_str_mv |
BR |
dc.publisher.department.fl_str_mv |
Faculdade de Engenharia |
publisher.none.fl_str_mv |
Pontifícia Universidade Católica do Rio Grande do Sul |
dc.source.none.fl_str_mv |
reponame:Biblioteca Digital de Teses e Dissertações da PUC_RS instname:Pontifícia Universidade Católica do Rio Grande do Sul (PUCRS) instacron:PUC_RS |
instname_str |
Pontifícia Universidade Católica do Rio Grande do Sul (PUCRS) |
instacron_str |
PUC_RS |
institution |
PUC_RS |
reponame_str |
Biblioteca Digital de Teses e Dissertações da PUC_RS |
collection |
Biblioteca Digital de Teses e Dissertações da PUC_RS |
bitstream.url.fl_str_mv |
http://tede2.pucrs.br/tede2/bitstream/tede/3242/3/451351.pdf.jpg http://tede2.pucrs.br/tede2/bitstream/tede/3242/2/451351.pdf.txt http://tede2.pucrs.br/tede2/bitstream/tede/3242/1/451351.pdf |
bitstream.checksum.fl_str_mv |
184e1619b8019f2186a3306f812e87c5 513a6f9907b156320e0b0ef9dd80e307 7eaa5f03071c1e8bf740f642f617913b |
bitstream.checksumAlgorithm.fl_str_mv |
MD5 MD5 MD5 |
repository.name.fl_str_mv |
Biblioteca Digital de Teses e Dissertações da PUC_RS - Pontifícia Universidade Católica do Rio Grande do Sul (PUCRS) |
repository.mail.fl_str_mv |
biblioteca.central@pucrs.br|| |
_version_ |
1799765292258164736 |