Preparação de micro e nanoesferas de PLGA com mentol

Detalhes bibliográficos
Autor(a) principal: Holz, Juliana Pelisoli
Data de Publicação: 2012
Tipo de documento: Dissertação
Idioma: por
Título da fonte: Biblioteca Digital de Teses e Dissertações da PUC_RS
Texto Completo: http://tede2.pucrs.br/tede2/handle/tede/3192
Resumo: One area of nanotechnology of great interest is the formation of nanoparticles (nanospheres and nanocapsules) because it allows the development of controlled release formulations, in other words, those with the ability to properly release the actives agents. In such products, the active ingredient protected is gradually released through appropriate stimulus. There is a special interest in the preparation of nanoparticles of biodegradable polymers, for example, polyesters such as poly-lactic acid and glycolic and its copolymers, such as acid poly(lactic-co-glycolic) (PLGA), considering its biocompatibility and biodegradation. In this context, this study has as objective to produce nanospheres from the PLGA biodegradable polymer containing menthol through the technique of multiple emulsion/solvent evaporation. The prepared PLGA / menthol micro and nanospheres, presented mostly average diameters between 217 and 13,103 nm, Tg 41 °C and thermal stability up to 260 °C. The presence of menthol in the micro and nanospheres was demonstrated by the characterization techniques used, as well as the physical presence of menthol aroma perceptiple to the smell. At last, was made a preliminary valuation of the efficiency of incorporation of aroma, showing to be effective, since the micro and nanospheres with a higher concentration of menthol in its formulation demonstrated from the techniques used (relation between the heights of the bands of menthol and PLGA in IR and through the higher mass loss relative to the menthol in the TGA), present approximately 60% more menthol incorporated into the polymer matrix of these micro and nanoparticles in relation to others
id P_RS_e736d862d43d8b2089371e439cb4803a
oai_identifier_str oai:tede2.pucrs.br:tede/3192
network_acronym_str P_RS
network_name_str Biblioteca Digital de Teses e Dissertações da PUC_RS
repository_id_str
spelling Ligabue, Rosane AngélicaCPF:50182277020http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4784426H5CPF:02114123090http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4277067D0Holz, Juliana Pelisoli2015-04-14T13:58:45Z2012-02-072012-01-26HOLZ, Juliana Pelisoli. Preparação de micro e nanoesferas de PLGA com mentol. 2012. 83 f. Dissertação (Mestrado em Engenharia e Tecnologia de Materiais) - Pontifícia Universidade Católica do Rio Grande do Sul, Porto Alegre, 2012.http://tede2.pucrs.br/tede2/handle/tede/3192One area of nanotechnology of great interest is the formation of nanoparticles (nanospheres and nanocapsules) because it allows the development of controlled release formulations, in other words, those with the ability to properly release the actives agents. In such products, the active ingredient protected is gradually released through appropriate stimulus. There is a special interest in the preparation of nanoparticles of biodegradable polymers, for example, polyesters such as poly-lactic acid and glycolic and its copolymers, such as acid poly(lactic-co-glycolic) (PLGA), considering its biocompatibility and biodegradation. In this context, this study has as objective to produce nanospheres from the PLGA biodegradable polymer containing menthol through the technique of multiple emulsion/solvent evaporation. The prepared PLGA / menthol micro and nanospheres, presented mostly average diameters between 217 and 13,103 nm, Tg 41 °C and thermal stability up to 260 °C. The presence of menthol in the micro and nanospheres was demonstrated by the characterization techniques used, as well as the physical presence of menthol aroma perceptiple to the smell. At last, was made a preliminary valuation of the efficiency of incorporation of aroma, showing to be effective, since the micro and nanospheres with a higher concentration of menthol in its formulation demonstrated from the techniques used (relation between the heights of the bands of menthol and PLGA in IR and through the higher mass loss relative to the menthol in the TGA), present approximately 60% more menthol incorporated into the polymer matrix of these micro and nanoparticles in relation to othersUma das áreas da nanotecnologia de grande interesse é a da formação de nanopartículas (nanoesferas e nanocápsulas), pois permite o desenvolvimento de fórmulas de liberação controlada, ou seja, aquelas com a capacidade de liberar os agentes ativos adequadamente. Em tais produtos, o princípio ativo protegido é liberado gradativamente por meio de estímulos adequados. Existe um interesse especial na preparação de nanopartículas de polímeros biodegradáveis, como por exemplo, os poliésteres como ácido poli-láctico e o glicólico, e seus copolímeros, como o ácido poli(láctico-co-glicólico) (PLGA), considerando sua biocompatibilidade e biodegradação. Neste contexto, o presente trabalho teve como objetivo produzir nanoesferas a partir do polímero biodegradável PLGA contendo mentol através da técnica de emulsão múltipla/evaporação do solvente. As micro e nanoesferas de PLGA/mentol preparadas apresentaram, na sua maioria, diâmetros médios entre 217 e 13.103 nm, Tg 41 °C e estabilidade térmica até 260 °C. A presença de mentol nas micro e nanoesferas foi evidenciada através das técnicas de caracterização utilizadas, bem como, pela presença física de aroma característico de mentol perceptível ao olfato. Por último, foi feita uma avaliação preliminar da eficiência de incorporação do aroma, mostrando-se eficaz, uma vez que, as micro e nanoesferas com maior concentração de mentol em sua formulação demonstraram a partir das técnicas utilizadas (relação entre as alturas das bandas do mentol e de PLGA no IV e através da maior perda de massa relativa ao mentol no TGA), apresentarem aproximadamente 60% mais mentol incorporado a matriz polimérica destas micro e nanopartículas em relação às demais.Made available in DSpace on 2015-04-14T13:58:45Z (GMT). No. of bitstreams: 1 436435.pdf: 2585417 bytes, checksum: b29fdea176ca870153d00a4ebc8a0345 (MD5) Previous issue date: 2012-01-26application/pdfhttp://tede2.pucrs.br:80/tede2/retrieve/12291/436435.pdf.jpgporPontifícia Universidade Católica do Rio Grande do SulPrograma de Pós-Graduação em Engenharia e Tecnologia de MateriaisPUCRSBRFaculdade de EngenhariaENGENHARIA DE MATERIAISPOLÍMEROSNANOPARTÍCULASNANOTECNOLOGIACNPQ::ENGENHARIASPreparação de micro e nanoesferas de PLGA com mentolinfo:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/masterThesis-7432719344215120122500600-655770572761439785info:eu-repo/semantics/openAccessreponame:Biblioteca Digital de Teses e Dissertações da PUC_RSinstname:Pontifícia Universidade Católica do Rio Grande do Sul (PUCRS)instacron:PUC_RSTHUMBNAIL436435.pdf.jpg436435.pdf.jpgimage/jpeg4555http://tede2.pucrs.br/tede2/bitstream/tede/3192/3/436435.pdf.jpg53abe7d3403ecc79b60604d714ca88b2MD53TEXT436435.pdf.txt436435.pdf.txttext/plain107872http://tede2.pucrs.br/tede2/bitstream/tede/3192/2/436435.pdf.txtd769f881be97914570dd3e46613632aeMD52ORIGINAL436435.pdfapplication/pdf2585417http://tede2.pucrs.br/tede2/bitstream/tede/3192/1/436435.pdfb29fdea176ca870153d00a4ebc8a0345MD51tede/31922015-04-17 16:09:31.77oai:tede2.pucrs.br:tede/3192Biblioteca Digital de Teses e Dissertaçõeshttp://tede2.pucrs.br/tede2/PRIhttps://tede2.pucrs.br/oai/requestbiblioteca.central@pucrs.br||opendoar:2015-04-17T19:09:31Biblioteca Digital de Teses e Dissertações da PUC_RS - Pontifícia Universidade Católica do Rio Grande do Sul (PUCRS)false
dc.title.por.fl_str_mv Preparação de micro e nanoesferas de PLGA com mentol
title Preparação de micro e nanoesferas de PLGA com mentol
spellingShingle Preparação de micro e nanoesferas de PLGA com mentol
Holz, Juliana Pelisoli
ENGENHARIA DE MATERIAIS
POLÍMEROS
NANOPARTÍCULAS
NANOTECNOLOGIA
CNPQ::ENGENHARIAS
title_short Preparação de micro e nanoesferas de PLGA com mentol
title_full Preparação de micro e nanoesferas de PLGA com mentol
title_fullStr Preparação de micro e nanoesferas de PLGA com mentol
title_full_unstemmed Preparação de micro e nanoesferas de PLGA com mentol
title_sort Preparação de micro e nanoesferas de PLGA com mentol
author Holz, Juliana Pelisoli
author_facet Holz, Juliana Pelisoli
author_role author
dc.contributor.advisor1.fl_str_mv Ligabue, Rosane Angélica
dc.contributor.advisor1ID.fl_str_mv CPF:50182277020
dc.contributor.advisor1Lattes.fl_str_mv http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4784426H5
dc.contributor.authorID.fl_str_mv CPF:02114123090
dc.contributor.authorLattes.fl_str_mv http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4277067D0
dc.contributor.author.fl_str_mv Holz, Juliana Pelisoli
contributor_str_mv Ligabue, Rosane Angélica
dc.subject.por.fl_str_mv ENGENHARIA DE MATERIAIS
POLÍMEROS
NANOPARTÍCULAS
NANOTECNOLOGIA
topic ENGENHARIA DE MATERIAIS
POLÍMEROS
NANOPARTÍCULAS
NANOTECNOLOGIA
CNPQ::ENGENHARIAS
dc.subject.cnpq.fl_str_mv CNPQ::ENGENHARIAS
description One area of nanotechnology of great interest is the formation of nanoparticles (nanospheres and nanocapsules) because it allows the development of controlled release formulations, in other words, those with the ability to properly release the actives agents. In such products, the active ingredient protected is gradually released through appropriate stimulus. There is a special interest in the preparation of nanoparticles of biodegradable polymers, for example, polyesters such as poly-lactic acid and glycolic and its copolymers, such as acid poly(lactic-co-glycolic) (PLGA), considering its biocompatibility and biodegradation. In this context, this study has as objective to produce nanospheres from the PLGA biodegradable polymer containing menthol through the technique of multiple emulsion/solvent evaporation. The prepared PLGA / menthol micro and nanospheres, presented mostly average diameters between 217 and 13,103 nm, Tg 41 °C and thermal stability up to 260 °C. The presence of menthol in the micro and nanospheres was demonstrated by the characterization techniques used, as well as the physical presence of menthol aroma perceptiple to the smell. At last, was made a preliminary valuation of the efficiency of incorporation of aroma, showing to be effective, since the micro and nanospheres with a higher concentration of menthol in its formulation demonstrated from the techniques used (relation between the heights of the bands of menthol and PLGA in IR and through the higher mass loss relative to the menthol in the TGA), present approximately 60% more menthol incorporated into the polymer matrix of these micro and nanoparticles in relation to others
publishDate 2012
dc.date.available.fl_str_mv 2012-02-07
dc.date.issued.fl_str_mv 2012-01-26
dc.date.accessioned.fl_str_mv 2015-04-14T13:58:45Z
dc.type.status.fl_str_mv info:eu-repo/semantics/publishedVersion
dc.type.driver.fl_str_mv info:eu-repo/semantics/masterThesis
format masterThesis
status_str publishedVersion
dc.identifier.citation.fl_str_mv HOLZ, Juliana Pelisoli. Preparação de micro e nanoesferas de PLGA com mentol. 2012. 83 f. Dissertação (Mestrado em Engenharia e Tecnologia de Materiais) - Pontifícia Universidade Católica do Rio Grande do Sul, Porto Alegre, 2012.
dc.identifier.uri.fl_str_mv http://tede2.pucrs.br/tede2/handle/tede/3192
identifier_str_mv HOLZ, Juliana Pelisoli. Preparação de micro e nanoesferas de PLGA com mentol. 2012. 83 f. Dissertação (Mestrado em Engenharia e Tecnologia de Materiais) - Pontifícia Universidade Católica do Rio Grande do Sul, Porto Alegre, 2012.
url http://tede2.pucrs.br/tede2/handle/tede/3192
dc.language.iso.fl_str_mv por
language por
dc.relation.program.fl_str_mv -7432719344215120122
dc.relation.confidence.fl_str_mv 500
600
dc.relation.department.fl_str_mv -655770572761439785
dc.rights.driver.fl_str_mv info:eu-repo/semantics/openAccess
eu_rights_str_mv openAccess
dc.format.none.fl_str_mv application/pdf
dc.publisher.none.fl_str_mv Pontifícia Universidade Católica do Rio Grande do Sul
dc.publisher.program.fl_str_mv Programa de Pós-Graduação em Engenharia e Tecnologia de Materiais
dc.publisher.initials.fl_str_mv PUCRS
dc.publisher.country.fl_str_mv BR
dc.publisher.department.fl_str_mv Faculdade de Engenharia
publisher.none.fl_str_mv Pontifícia Universidade Católica do Rio Grande do Sul
dc.source.none.fl_str_mv reponame:Biblioteca Digital de Teses e Dissertações da PUC_RS
instname:Pontifícia Universidade Católica do Rio Grande do Sul (PUCRS)
instacron:PUC_RS
instname_str Pontifícia Universidade Católica do Rio Grande do Sul (PUCRS)
instacron_str PUC_RS
institution PUC_RS
reponame_str Biblioteca Digital de Teses e Dissertações da PUC_RS
collection Biblioteca Digital de Teses e Dissertações da PUC_RS
bitstream.url.fl_str_mv http://tede2.pucrs.br/tede2/bitstream/tede/3192/3/436435.pdf.jpg
http://tede2.pucrs.br/tede2/bitstream/tede/3192/2/436435.pdf.txt
http://tede2.pucrs.br/tede2/bitstream/tede/3192/1/436435.pdf
bitstream.checksum.fl_str_mv 53abe7d3403ecc79b60604d714ca88b2
d769f881be97914570dd3e46613632ae
b29fdea176ca870153d00a4ebc8a0345
bitstream.checksumAlgorithm.fl_str_mv MD5
MD5
MD5
repository.name.fl_str_mv Biblioteca Digital de Teses e Dissertações da PUC_RS - Pontifícia Universidade Católica do Rio Grande do Sul (PUCRS)
repository.mail.fl_str_mv biblioteca.central@pucrs.br||
_version_ 1821771138246639616