Análise de filmes antirreflexo de dióxido de titânio e nitreto de silício em células solares P+NN+
Autor(a) principal: | |
---|---|
Data de Publicação: | 2012 |
Tipo de documento: | Dissertação |
Idioma: | por |
Título da fonte: | Biblioteca Digital de Teses e Dissertações da PUC_RS |
Texto Completo: | http://tede2.pucrs.br/tede2/handle/tede/3222 |
Resumo: | In this work we compared the antireflection coatings of titanium dioxide and silicon nitride for p+nn+ solar cell fabrication. This type of solar cell is more stable in the long term compared to n+pp+ cells and allows obtaining higher efficiencies. TiO2 films were produced by evaporation in high vacuum by electron beam and by chemical vapor deposition at atmospheric pressure (APCVD). The silicon nitride antireflection layer was obtained by reactive sputtering and by plasma enhanced chemical vapor deposition (PECVD). The films were deposited on textured silicon wafers and were characterized by measuring the spectral reflectance. Solar cells with these films were fabricated and characterized. The deposited films presented very low weighted reflectance, of around 1.8 % for silicon nitride films and 2.6 % for titanium dioxide ones, for any technique used. The lowest average weighted reflectance was obtained with SiNx:H thin films deposited by PECVD, with (1.93 ± 0.08) %. Concerning the homogeneity of the films, silicon nitride films presented the lowest standard deviation in the average weighted reflectance, of around 4 % relative. A thermal process performed at 840 °C in a belt furnace modifies the average weighted reflectance of about 0.3 % to 0.6 % absolutes for silicon nitride and TiO2 films, respectively. The p+nn+ solar cells doped with boron and phosphorus and metallized by screen printing reached the highest efficiencies where manufactured by using silicon nitride antireflection coating deposited by PECVD. The maximum efficiency of 13.7 % and an average of (13.5 ± 0.2) %, were achievied mainly because they showed a short circuit current density of around 1 mA/cm2 above that from solar cells with the other films investigated in this work. This difference is attributed not only to a low reflectance but also to a better surface passivation of SiNx:H layer. |
id |
P_RS_ffb7fbd434c724e5527c2f6e3b3bfc00 |
---|---|
oai_identifier_str |
oai:tede2.pucrs.br:tede/3222 |
network_acronym_str |
P_RS |
network_name_str |
Biblioteca Digital de Teses e Dissertações da PUC_RS |
repository_id_str |
|
spelling |
Moehlecke, AdrianoCPF:48738727072http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4787919H0CPF:00975584006http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4321077D1Fagundes, Raquel Sanguiné2015-04-14T13:58:55Z2013-01-092012-12-07FAGUNDES, Raquel Sanguiné. Análise de filmes antirreflexo de dióxido de titânio e nitreto de silício em células solares P+NN+. 2012. 61 f. Dissertação (Mestrado em Engenharia e Tecnologia de Materiais) - Pontifícia Universidade Católica do Rio Grande do Sul, Porto Alegre, 2012.http://tede2.pucrs.br/tede2/handle/tede/3222In this work we compared the antireflection coatings of titanium dioxide and silicon nitride for p+nn+ solar cell fabrication. This type of solar cell is more stable in the long term compared to n+pp+ cells and allows obtaining higher efficiencies. TiO2 films were produced by evaporation in high vacuum by electron beam and by chemical vapor deposition at atmospheric pressure (APCVD). The silicon nitride antireflection layer was obtained by reactive sputtering and by plasma enhanced chemical vapor deposition (PECVD). The films were deposited on textured silicon wafers and were characterized by measuring the spectral reflectance. Solar cells with these films were fabricated and characterized. The deposited films presented very low weighted reflectance, of around 1.8 % for silicon nitride films and 2.6 % for titanium dioxide ones, for any technique used. The lowest average weighted reflectance was obtained with SiNx:H thin films deposited by PECVD, with (1.93 ± 0.08) %. Concerning the homogeneity of the films, silicon nitride films presented the lowest standard deviation in the average weighted reflectance, of around 4 % relative. A thermal process performed at 840 °C in a belt furnace modifies the average weighted reflectance of about 0.3 % to 0.6 % absolutes for silicon nitride and TiO2 films, respectively. The p+nn+ solar cells doped with boron and phosphorus and metallized by screen printing reached the highest efficiencies where manufactured by using silicon nitride antireflection coating deposited by PECVD. The maximum efficiency of 13.7 % and an average of (13.5 ± 0.2) %, were achievied mainly because they showed a short circuit current density of around 1 mA/cm2 above that from solar cells with the other films investigated in this work. This difference is attributed not only to a low reflectance but also to a better surface passivation of SiNx:H layer.Neste trabalho foram comparados os filmes antirreflexo de dióxido de titânio e de nitreto de silício para fabricação de células solares p+nn+. Este tipo de célula solar é mais estável em longo prazo em relação às células n+pp+ e permite a obtenção de maiores eficiências. Os filmes de TiO2 foram produzidos por evaporação em alto vácuo com canhão de elétrons e por deposição química em fase vapor a pressão atmosférica (APCVD). A camada antirreflexo de nitreto de silício foi obtida por sputtering reativo e por deposição química em fase vapor assistida por plasma (PECVD). Os filmes foram depositados em lâminas de silício texturadas e caracterizados pela medida da refletância espectral bem como foram fabricadas e caracterizadas células solares com os filmes. Os filmes depositados apresentaram refletância média ponderada bastante baixas, da ordem de 1,8 % para filmes de nitreto de silício e de 2,6 % para filmes de óxido de titânio, não interessando a técnica utilizada. A menor média de refletância ponderada foi obtida com os filmes de SiNx:H depositados por PECVD, com (1,93 ± 0,08) %. No que se refere a homogeneidade dos filmes, os filmes de nitreto de silício foram os que apresentaram o menor desvio padrão nas médias de refletância ponderada, da ordem de 4 % relativo. Observou-se que um processo térmico realizado a 840 °C em forno de esteira provocou variações na refletância média ponderada da ordem de 0,3 % a 0,6 % absoluto para filmes de nitreto de silício e de TiO2, respectivamente. As células solares p+nn+, dopadas com boro e fósforo e metalizadas por serigrafia que atingiram as maiores eficiências foram as fabricadas com nitreto de silício depositado por PECVD, atingindo a eficiência máxima de 13,7 % e média de (13,5 ± 0,2) %, principalmente porque apresentaram uma densidade de corrente de curtocircuito da ordem de 1 mA/cm2 superior a de células solares com os demais filmes estudados nesta dissertação. Esta diferença foi atribuída não somente a uma menor refletância mas também a passivação de superfície mais eficaz do filme de SiNx:H.Made available in DSpace on 2015-04-14T13:58:55Z (GMT). No. of bitstreams: 1 444962.pdf: 1192335 bytes, checksum: 99f2c1e4c50a70affaa97a11bf6d814e (MD5) Previous issue date: 2012-12-07application/pdfhttp://tede2.pucrs.br:80/tede2/retrieve/11559/444962.pdf.jpgporPontifícia Universidade Católica do Rio Grande do SulPrograma de Pós-Graduação em Engenharia e Tecnologia de MateriaisPUCRSBRFaculdade de EngenhariaENGENHARIA DE MATERIAISCÉLULAS SOLARESSILÍCIOCNPQ::ENGENHARIASAnálise de filmes antirreflexo de dióxido de titânio e nitreto de silício em células solares P+NN+info:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/masterThesis-7432719344215120122500600-655770572761439785info:eu-repo/semantics/openAccessreponame:Biblioteca Digital de Teses e Dissertações da PUC_RSinstname:Pontifícia Universidade Católica do Rio Grande do Sul (PUCRS)instacron:PUC_RSTHUMBNAIL444962.pdf.jpg444962.pdf.jpgimage/jpeg5121http://tede2.pucrs.br/tede2/bitstream/tede/3222/3/444962.pdf.jpg3920ab9f89404c7b6fca14d92e00516fMD53TEXT444962.pdf.txt444962.pdf.txttext/plain91887http://tede2.pucrs.br/tede2/bitstream/tede/3222/2/444962.pdf.txtc165dae5fcfd09d935fbc8515ead9129MD52ORIGINAL444962.pdfapplication/pdf1192335http://tede2.pucrs.br/tede2/bitstream/tede/3222/1/444962.pdf99f2c1e4c50a70affaa97a11bf6d814eMD51tede/32222015-04-17 16:09:31.029oai:tede2.pucrs.br:tede/3222Biblioteca Digital de Teses e Dissertaçõeshttp://tede2.pucrs.br/tede2/PRIhttps://tede2.pucrs.br/oai/requestbiblioteca.central@pucrs.br||opendoar:2015-04-17T19:09:31Biblioteca Digital de Teses e Dissertações da PUC_RS - Pontifícia Universidade Católica do Rio Grande do Sul (PUCRS)false |
dc.title.por.fl_str_mv |
Análise de filmes antirreflexo de dióxido de titânio e nitreto de silício em células solares P+NN+ |
title |
Análise de filmes antirreflexo de dióxido de titânio e nitreto de silício em células solares P+NN+ |
spellingShingle |
Análise de filmes antirreflexo de dióxido de titânio e nitreto de silício em células solares P+NN+ Fagundes, Raquel Sanguiné ENGENHARIA DE MATERIAIS CÉLULAS SOLARES SILÍCIO CNPQ::ENGENHARIAS |
title_short |
Análise de filmes antirreflexo de dióxido de titânio e nitreto de silício em células solares P+NN+ |
title_full |
Análise de filmes antirreflexo de dióxido de titânio e nitreto de silício em células solares P+NN+ |
title_fullStr |
Análise de filmes antirreflexo de dióxido de titânio e nitreto de silício em células solares P+NN+ |
title_full_unstemmed |
Análise de filmes antirreflexo de dióxido de titânio e nitreto de silício em células solares P+NN+ |
title_sort |
Análise de filmes antirreflexo de dióxido de titânio e nitreto de silício em células solares P+NN+ |
author |
Fagundes, Raquel Sanguiné |
author_facet |
Fagundes, Raquel Sanguiné |
author_role |
author |
dc.contributor.advisor1.fl_str_mv |
Moehlecke, Adriano |
dc.contributor.advisor1ID.fl_str_mv |
CPF:48738727072 |
dc.contributor.advisor1Lattes.fl_str_mv |
http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4787919H0 |
dc.contributor.authorID.fl_str_mv |
CPF:00975584006 |
dc.contributor.authorLattes.fl_str_mv |
http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4321077D1 |
dc.contributor.author.fl_str_mv |
Fagundes, Raquel Sanguiné |
contributor_str_mv |
Moehlecke, Adriano |
dc.subject.por.fl_str_mv |
ENGENHARIA DE MATERIAIS CÉLULAS SOLARES SILÍCIO |
topic |
ENGENHARIA DE MATERIAIS CÉLULAS SOLARES SILÍCIO CNPQ::ENGENHARIAS |
dc.subject.cnpq.fl_str_mv |
CNPQ::ENGENHARIAS |
description |
In this work we compared the antireflection coatings of titanium dioxide and silicon nitride for p+nn+ solar cell fabrication. This type of solar cell is more stable in the long term compared to n+pp+ cells and allows obtaining higher efficiencies. TiO2 films were produced by evaporation in high vacuum by electron beam and by chemical vapor deposition at atmospheric pressure (APCVD). The silicon nitride antireflection layer was obtained by reactive sputtering and by plasma enhanced chemical vapor deposition (PECVD). The films were deposited on textured silicon wafers and were characterized by measuring the spectral reflectance. Solar cells with these films were fabricated and characterized. The deposited films presented very low weighted reflectance, of around 1.8 % for silicon nitride films and 2.6 % for titanium dioxide ones, for any technique used. The lowest average weighted reflectance was obtained with SiNx:H thin films deposited by PECVD, with (1.93 ± 0.08) %. Concerning the homogeneity of the films, silicon nitride films presented the lowest standard deviation in the average weighted reflectance, of around 4 % relative. A thermal process performed at 840 °C in a belt furnace modifies the average weighted reflectance of about 0.3 % to 0.6 % absolutes for silicon nitride and TiO2 films, respectively. The p+nn+ solar cells doped with boron and phosphorus and metallized by screen printing reached the highest efficiencies where manufactured by using silicon nitride antireflection coating deposited by PECVD. The maximum efficiency of 13.7 % and an average of (13.5 ± 0.2) %, were achievied mainly because they showed a short circuit current density of around 1 mA/cm2 above that from solar cells with the other films investigated in this work. This difference is attributed not only to a low reflectance but also to a better surface passivation of SiNx:H layer. |
publishDate |
2012 |
dc.date.issued.fl_str_mv |
2012-12-07 |
dc.date.available.fl_str_mv |
2013-01-09 |
dc.date.accessioned.fl_str_mv |
2015-04-14T13:58:55Z |
dc.type.status.fl_str_mv |
info:eu-repo/semantics/publishedVersion |
dc.type.driver.fl_str_mv |
info:eu-repo/semantics/masterThesis |
format |
masterThesis |
status_str |
publishedVersion |
dc.identifier.citation.fl_str_mv |
FAGUNDES, Raquel Sanguiné. Análise de filmes antirreflexo de dióxido de titânio e nitreto de silício em células solares P+NN+. 2012. 61 f. Dissertação (Mestrado em Engenharia e Tecnologia de Materiais) - Pontifícia Universidade Católica do Rio Grande do Sul, Porto Alegre, 2012. |
dc.identifier.uri.fl_str_mv |
http://tede2.pucrs.br/tede2/handle/tede/3222 |
identifier_str_mv |
FAGUNDES, Raquel Sanguiné. Análise de filmes antirreflexo de dióxido de titânio e nitreto de silício em células solares P+NN+. 2012. 61 f. Dissertação (Mestrado em Engenharia e Tecnologia de Materiais) - Pontifícia Universidade Católica do Rio Grande do Sul, Porto Alegre, 2012. |
url |
http://tede2.pucrs.br/tede2/handle/tede/3222 |
dc.language.iso.fl_str_mv |
por |
language |
por |
dc.relation.program.fl_str_mv |
-7432719344215120122 |
dc.relation.confidence.fl_str_mv |
500 600 |
dc.relation.department.fl_str_mv |
-655770572761439785 |
dc.rights.driver.fl_str_mv |
info:eu-repo/semantics/openAccess |
eu_rights_str_mv |
openAccess |
dc.format.none.fl_str_mv |
application/pdf |
dc.publisher.none.fl_str_mv |
Pontifícia Universidade Católica do Rio Grande do Sul |
dc.publisher.program.fl_str_mv |
Programa de Pós-Graduação em Engenharia e Tecnologia de Materiais |
dc.publisher.initials.fl_str_mv |
PUCRS |
dc.publisher.country.fl_str_mv |
BR |
dc.publisher.department.fl_str_mv |
Faculdade de Engenharia |
publisher.none.fl_str_mv |
Pontifícia Universidade Católica do Rio Grande do Sul |
dc.source.none.fl_str_mv |
reponame:Biblioteca Digital de Teses e Dissertações da PUC_RS instname:Pontifícia Universidade Católica do Rio Grande do Sul (PUCRS) instacron:PUC_RS |
instname_str |
Pontifícia Universidade Católica do Rio Grande do Sul (PUCRS) |
instacron_str |
PUC_RS |
institution |
PUC_RS |
reponame_str |
Biblioteca Digital de Teses e Dissertações da PUC_RS |
collection |
Biblioteca Digital de Teses e Dissertações da PUC_RS |
bitstream.url.fl_str_mv |
http://tede2.pucrs.br/tede2/bitstream/tede/3222/3/444962.pdf.jpg http://tede2.pucrs.br/tede2/bitstream/tede/3222/2/444962.pdf.txt http://tede2.pucrs.br/tede2/bitstream/tede/3222/1/444962.pdf |
bitstream.checksum.fl_str_mv |
3920ab9f89404c7b6fca14d92e00516f c165dae5fcfd09d935fbc8515ead9129 99f2c1e4c50a70affaa97a11bf6d814e |
bitstream.checksumAlgorithm.fl_str_mv |
MD5 MD5 MD5 |
repository.name.fl_str_mv |
Biblioteca Digital de Teses e Dissertações da PUC_RS - Pontifícia Universidade Católica do Rio Grande do Sul (PUCRS) |
repository.mail.fl_str_mv |
biblioteca.central@pucrs.br|| |
_version_ |
1799765291797839872 |