Tribooxidational effects on friction and wear behavior of silicon nitride/tool steel and silicon nitride/gray cast iron contacts

• Autor(a) principal: Gomes, J. R.
• Data de Publicação: 1999
• Outros Autores: Miranda, A. S., Vieira, J. M., Silva, R. F.
• Tipo de documento: Artigo
• Idioma: eng
• Título da fonte: Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos)
• Texto Completo: http://hdl.handle.net/1822/1548
• topic: Science & Technology

Unlubricated pin-on-disk wear tests of SiJN4 against tool steel and gray cast iron were performed at 5 N of normal load, 0.5 m/s of sliding speed, and environmental temperature in the range 22°-600°C. The friction oefficient of SiJN4 sliding against tool steel and gray cast iron had maximum values of 0.88-0.98 for tests at 100°C. The friction coefficient of SiJN4 sliding against gray cast iron couples had minimum values of 0.48-0.57 at 400°C. Because of the increased third-body protection, the wear coefficient of the SiJN4 pins of the SiJN4/gray cast iron couples decreased by 1 order of magnitude from 1.6 x 10-5 mmJ/(N.m) at room temperature to 1.3 x 10-6 mmJ/(N.m) at 600°C. Fe20J and FeJO4 resulting from Tribooxidation of the metallic disks were the main constituents of the wear debris and adherent tribolayers. Activation energy values (6.3-13. 7 kJ/mol) were comparable to those of oxidation wear of steel (7.3- 11.8 kJ/mol) but were much lower than the activation energy for oxidation of iron alloys in static conditions. Calculations of the activation energy of the oxidation wear corroborate the morphological observations of a sacrificial action of the metallic surface protecting the ceramic material.