Micropatterned silk fibroin membranes for guided tissue regeneration

Detalhes bibliográficos
Autor(a) principal: Pina, João Alexandre Gouvinhas de
Data de Publicação: 2019
Tipo de documento: Dissertação
Idioma: eng
Título da fonte: Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos)
Texto Completo: http://hdl.handle.net/10400.14/31495
Resumo: The role of tissue engineering in regenerative medicine has been evolving in the past decades, with biomedical technological developments allowing for an increasing number of medical applications. One of such developments has been to combine biomaterials with micropatterning techniques for guided tissue regeneration. In fact, studies have found that using biomaterials with micropatterned surfaces helps promoting cell growth and differentiation. Those results have generated high expectations regarding the treatment of worldwide impactful conditions such as spinal cord injury and periodontal disease. Regarding these progresses and potential, this thesis looked towards assessing the hypothesis of using micropatterned silk fibroin (SF) membranes for applications in guided tissue regeneration. The membranes were produced by solvent casting and micropatterning was made via soft lithography by combining both microcontact printing (μCP) and microfluidic patterning techniques. The first objective was to obtain a controlled micropatterned topography in the SF membranes. Then it was important to characterize the micropatterned materials (MP) and compare their behaviour to non-patterned materials. MP displayed lower wettability, higher thickness and yet behaved equally in terms of mechanical performance. Finally, human derived adipose stem cells (hASCs) and periodontal ligament cells (hPDLs) were seeded on the different membranes to compare their capacity for cell adhesion and organization. Results showed successful adhesion and viability of both cell types to the membrane samples, particularly, in hPDLs samples, although cell organization was not observed in neither samples.
id RCAP_7884a4a179baa0b56efb38cb44887c69
oai_identifier_str oai:repositorio.ucp.pt:10400.14/31495
network_acronym_str RCAP
network_name_str Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos)
repository_id_str 7160
spelling Micropatterned silk fibroin membranes for guided tissue regenerationTissue engineeringGuided tissue regenerationMicropatterningBiomaterialsPeriodontal diseaseSpinal cord injuryEngenharia de tecidosRegeneração tecidual orientadaMicro padrõesBiomateriaisDoença periodontalLesão medularDomínio/Área Científica::Ciências Médicas::Biotecnologia MédicaThe role of tissue engineering in regenerative medicine has been evolving in the past decades, with biomedical technological developments allowing for an increasing number of medical applications. One of such developments has been to combine biomaterials with micropatterning techniques for guided tissue regeneration. In fact, studies have found that using biomaterials with micropatterned surfaces helps promoting cell growth and differentiation. Those results have generated high expectations regarding the treatment of worldwide impactful conditions such as spinal cord injury and periodontal disease. Regarding these progresses and potential, this thesis looked towards assessing the hypothesis of using micropatterned silk fibroin (SF) membranes for applications in guided tissue regeneration. The membranes were produced by solvent casting and micropatterning was made via soft lithography by combining both microcontact printing (μCP) and microfluidic patterning techniques. The first objective was to obtain a controlled micropatterned topography in the SF membranes. Then it was important to characterize the micropatterned materials (MP) and compare their behaviour to non-patterned materials. MP displayed lower wettability, higher thickness and yet behaved equally in terms of mechanical performance. Finally, human derived adipose stem cells (hASCs) and periodontal ligament cells (hPDLs) were seeded on the different membranes to compare their capacity for cell adhesion and organization. Results showed successful adhesion and viability of both cell types to the membrane samples, particularly, in hPDLs samples, although cell organization was not observed in neither samples.O papel da engenharia de tecidos na medicina regenerativa tem vindo a evoluir nas últimas décadas devido ao desenvolvimento de novas tecnologias para aplicações médicas. De entre tais desenvolvimentos, a combinação entre biomateriais e tecnologias de micro padrões tem vindo a ganhar um papel de destaque na regeneração tecidual orientada. Estudos permitiram apurar que a utilização de biomateriais com superfícies micro padronizadas potencia o crescimento e diferenciação celular. Deste modo, estes resultados têm gerado grandes expectativas em relação ao tratamento de condições de impacto global, tais como lesão medular e doença periodontal (periodontite). Com base neste potencial e progressos científicos, esta tese visou avaliar a hipótese de utilizar membranas à base de fibroína de seda (SF) com micro padrões para aplicação em regeneração tecidual orientada. As membranas foram produzidas através do método de solvent casting e os micro padrões foram conseguidos por soft lithography, combinando as técnicas de microcontact printing (μCP) e microfluidic patterning. O objetivo primário foi a obtenção de uma topografia com micro padrões específicos nas membranas SF. Seguidamente, caracterizaram-se os materiais com micro padrões (MP) e compararam-se com os materiais sem padrão, resultando na observação de menor molhabilidade e maior espessura em MP, porém o comportamento mecânico foi semelhante. Por fim cultivaram-se nas diferentes membranas, células estaminais de derivadas de tecido adiposo humano (hASC) e células do ligamento periodontal humano (hPDL), de forma a tecer a comparação entre as capacidades adesivas e de organização das células nos materiais. Os resultados foram bem sucedidos no contexto da adesão e viabilidade de ambos os tipos de células nas amostras de membranas, particularmente, no caso das amostras com hPDL, porém não foi possível observar-se uma organização bem definida em nenhuma das amostras.Oliveira, Ana Leite de Almeida Monteiro deSalgado, António José Braga Osório GomesVeritati - Repositório Institucional da Universidade Católica PortuguesaPina, João Alexandre Gouvinhas de2021-01-05T01:30:13Z2020-01-2320192020-01-23T00:00:00Zinfo:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/masterThesisapplication/pdfhttp://hdl.handle.net/10400.14/31495TID:202463486enginfo:eu-repo/semantics/openAccessreponame:Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos)instname:Agência para a Sociedade do Conhecimento (UMIC) - FCT - Sociedade da Informaçãoinstacron:RCAAP2023-07-12T17:36:54Zoai:repositorio.ucp.pt:10400.14/31495Portal AgregadorONGhttps://www.rcaap.pt/oai/openaireopendoar:71602024-03-19T18:25:17.532548Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos) - Agência para a Sociedade do Conhecimento (UMIC) - FCT - Sociedade da Informaçãofalse
dc.title.none.fl_str_mv Micropatterned silk fibroin membranes for guided tissue regeneration
title Micropatterned silk fibroin membranes for guided tissue regeneration
spellingShingle Micropatterned silk fibroin membranes for guided tissue regeneration
Pina, João Alexandre Gouvinhas de
Tissue engineering
Guided tissue regeneration
Micropatterning
Biomaterials
Periodontal disease
Spinal cord injury
Engenharia de tecidos
Regeneração tecidual orientada
Micro padrões
Biomateriais
Doença periodontal
Lesão medular
Domínio/Área Científica::Ciências Médicas::Biotecnologia Médica
title_short Micropatterned silk fibroin membranes for guided tissue regeneration
title_full Micropatterned silk fibroin membranes for guided tissue regeneration
title_fullStr Micropatterned silk fibroin membranes for guided tissue regeneration
title_full_unstemmed Micropatterned silk fibroin membranes for guided tissue regeneration
title_sort Micropatterned silk fibroin membranes for guided tissue regeneration
author Pina, João Alexandre Gouvinhas de
author_facet Pina, João Alexandre Gouvinhas de
author_role author
dc.contributor.none.fl_str_mv Oliveira, Ana Leite de Almeida Monteiro de
Salgado, António José Braga Osório Gomes
Veritati - Repositório Institucional da Universidade Católica Portuguesa
dc.contributor.author.fl_str_mv Pina, João Alexandre Gouvinhas de
dc.subject.por.fl_str_mv Tissue engineering
Guided tissue regeneration
Micropatterning
Biomaterials
Periodontal disease
Spinal cord injury
Engenharia de tecidos
Regeneração tecidual orientada
Micro padrões
Biomateriais
Doença periodontal
Lesão medular
Domínio/Área Científica::Ciências Médicas::Biotecnologia Médica
topic Tissue engineering
Guided tissue regeneration
Micropatterning
Biomaterials
Periodontal disease
Spinal cord injury
Engenharia de tecidos
Regeneração tecidual orientada
Micro padrões
Biomateriais
Doença periodontal
Lesão medular
Domínio/Área Científica::Ciências Médicas::Biotecnologia Médica
description The role of tissue engineering in regenerative medicine has been evolving in the past decades, with biomedical technological developments allowing for an increasing number of medical applications. One of such developments has been to combine biomaterials with micropatterning techniques for guided tissue regeneration. In fact, studies have found that using biomaterials with micropatterned surfaces helps promoting cell growth and differentiation. Those results have generated high expectations regarding the treatment of worldwide impactful conditions such as spinal cord injury and periodontal disease. Regarding these progresses and potential, this thesis looked towards assessing the hypothesis of using micropatterned silk fibroin (SF) membranes for applications in guided tissue regeneration. The membranes were produced by solvent casting and micropatterning was made via soft lithography by combining both microcontact printing (μCP) and microfluidic patterning techniques. The first objective was to obtain a controlled micropatterned topography in the SF membranes. Then it was important to characterize the micropatterned materials (MP) and compare their behaviour to non-patterned materials. MP displayed lower wettability, higher thickness and yet behaved equally in terms of mechanical performance. Finally, human derived adipose stem cells (hASCs) and periodontal ligament cells (hPDLs) were seeded on the different membranes to compare their capacity for cell adhesion and organization. Results showed successful adhesion and viability of both cell types to the membrane samples, particularly, in hPDLs samples, although cell organization was not observed in neither samples.
publishDate 2019
dc.date.none.fl_str_mv 2019
2020-01-23
2020-01-23T00:00:00Z
2021-01-05T01:30:13Z
dc.type.status.fl_str_mv info:eu-repo/semantics/publishedVersion
dc.type.driver.fl_str_mv info:eu-repo/semantics/masterThesis
format masterThesis
status_str publishedVersion
dc.identifier.uri.fl_str_mv http://hdl.handle.net/10400.14/31495
TID:202463486
url http://hdl.handle.net/10400.14/31495
identifier_str_mv TID:202463486
dc.language.iso.fl_str_mv eng
language eng
dc.rights.driver.fl_str_mv info:eu-repo/semantics/openAccess
eu_rights_str_mv openAccess
dc.format.none.fl_str_mv application/pdf
dc.source.none.fl_str_mv reponame:Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos)
instname:Agência para a Sociedade do Conhecimento (UMIC) - FCT - Sociedade da Informação
instacron:RCAAP
instname_str Agência para a Sociedade do Conhecimento (UMIC) - FCT - Sociedade da Informação
instacron_str RCAAP
institution RCAAP
reponame_str Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos)
collection Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos)
repository.name.fl_str_mv Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos) - Agência para a Sociedade do Conhecimento (UMIC) - FCT - Sociedade da Informação
repository.mail.fl_str_mv
_version_ 1799131966517280768