Kinetic and stoichiometric parameters estimation in a nitrifying bubble column through ‘‘in-situ’’ pulse respirometry

Detalhes bibliográficos
Autor(a) principal: Ordaz, Alberto
Data de Publicação: 2008
Outros Autores: Oliveira, Catarina S., Aguilar, Ricardo, Carrión, Manuel, Ferreira, Eugénio C., Alves, M. M., Thalasso, Frédéric
Tipo de documento: Artigo
Idioma: eng
Título da fonte: Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos)
Texto Completo: https://hdl.handle.net/1822/7799
Resumo: This article proposes a simple "in-situ" pulse respirometric method for the estimation of four important kinetic and stoichiometric parameters. The method is validated in a suspended biomass nitrifying reactor for the determination of (i) maximum oxygen uptake rate (OURexmax), (ii) oxidation yield (fE), (iii) biomass growth yield (fS), and (iv) affinity constant (KS). OURexmax and fE were directly obtained from respirograms. In the presented case study, a minimum substrate pulse of 10 mgNH4+-NL-1 was necessary to determine OURexmax which was 61.15 ± 4.09 mgO2 L-1 h-1 (5 repetitions). A linear correlation (r2 = 0.93) obtained between OURexmax and the biomass concentration in the reactor suggests that biomass concentration can be estimated from respirometric experiments. The substrate oxidation yield, fE, was determined along 60 days of continuous operation with an average error of 5.6%. The biomass growth yield was indirectly estimated from the substrate oxidation yield fE. The average obtained value (0.10 ± 0.04 mgCOD mg-1COD) was in accordance with the fS estimation by the traditional COD mass balance method under steady-state conditions (0.09 ± 0.01). The affinity constant KS was indirectly estimated after fitting the ascending part of the respirogram to a theoretical model. An average value of 0.48 ± 0.08 mgNH4+-NL-1 was obtained, which is in the range of affinity constants reported in the literature for the nitrification process (0.16-2 mgNH4+-NL-1).
id RCAP_c80d1917e7e426863b6aaf216599ba68
oai_identifier_str oai:repositorium.sdum.uminho.pt:1822/7799
network_acronym_str RCAP
network_name_str Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos)
repository_id_str 7160
spelling Kinetic and stoichiometric parameters estimation in a nitrifying bubble column through ‘‘in-situ’’ pulse respirometryRespirometryGrowth yieldIn-situ pulse techniqueKinetic parametersScience & TechnologyThis article proposes a simple "in-situ" pulse respirometric method for the estimation of four important kinetic and stoichiometric parameters. The method is validated in a suspended biomass nitrifying reactor for the determination of (i) maximum oxygen uptake rate (OURexmax), (ii) oxidation yield (fE), (iii) biomass growth yield (fS), and (iv) affinity constant (KS). OURexmax and fE were directly obtained from respirograms. In the presented case study, a minimum substrate pulse of 10 mgNH4+-NL-1 was necessary to determine OURexmax which was 61.15 ± 4.09 mgO2 L-1 h-1 (5 repetitions). A linear correlation (r2 = 0.93) obtained between OURexmax and the biomass concentration in the reactor suggests that biomass concentration can be estimated from respirometric experiments. The substrate oxidation yield, fE, was determined along 60 days of continuous operation with an average error of 5.6%. The biomass growth yield was indirectly estimated from the substrate oxidation yield fE. The average obtained value (0.10 ± 0.04 mgCOD mg-1COD) was in accordance with the fS estimation by the traditional COD mass balance method under steady-state conditions (0.09 ± 0.01). The affinity constant KS was indirectly estimated after fitting the ascending part of the respirogram to a theoretical model. An average value of 0.48 ± 0.08 mgNH4+-NL-1 was obtained, which is in the range of affinity constants reported in the literature for the nitrification process (0.16-2 mgNH4+-NL-1).European Union in the Framework of the Marie Curie ActionsFundação para a Ciência e a Tecnologia (FCT)Consejo Nacional de Ciencia y TecnologíaJohn Wiley and SonsUniversidade do MinhoOrdaz, AlbertoOliveira, Catarina S.Aguilar, RicardoCarrión, ManuelFerreira, Eugénio C.Alves, M. M.Thalasso, Frédéric2008-052008-05-01T00:00:00Zinfo:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/articleapplication/pdfhttps://hdl.handle.net/1822/7799eng"Biotechnology and Bioengineering". ISSN 0006-3592. 100:1 (May 2008) 94-102.0006-359210.1002/bit.2172318078297info:eu-repo/semantics/openAccessreponame:Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos)instname:Agência para a Sociedade do Conhecimento (UMIC) - FCT - Sociedade da Informaçãoinstacron:RCAAP2023-07-21T12:16:18Zoai:repositorium.sdum.uminho.pt:1822/7799Portal AgregadorONGhttps://www.rcaap.pt/oai/openaireopendoar:71602024-03-19T19:08:49.778710Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos) - Agência para a Sociedade do Conhecimento (UMIC) - FCT - Sociedade da Informaçãofalse
dc.title.none.fl_str_mv Kinetic and stoichiometric parameters estimation in a nitrifying bubble column through ‘‘in-situ’’ pulse respirometry
title Kinetic and stoichiometric parameters estimation in a nitrifying bubble column through ‘‘in-situ’’ pulse respirometry
spellingShingle Kinetic and stoichiometric parameters estimation in a nitrifying bubble column through ‘‘in-situ’’ pulse respirometry
Ordaz, Alberto
Respirometry
Growth yield
In-situ pulse technique
Kinetic parameters
Science & Technology
title_short Kinetic and stoichiometric parameters estimation in a nitrifying bubble column through ‘‘in-situ’’ pulse respirometry
title_full Kinetic and stoichiometric parameters estimation in a nitrifying bubble column through ‘‘in-situ’’ pulse respirometry
title_fullStr Kinetic and stoichiometric parameters estimation in a nitrifying bubble column through ‘‘in-situ’’ pulse respirometry
title_full_unstemmed Kinetic and stoichiometric parameters estimation in a nitrifying bubble column through ‘‘in-situ’’ pulse respirometry
title_sort Kinetic and stoichiometric parameters estimation in a nitrifying bubble column through ‘‘in-situ’’ pulse respirometry
author Ordaz, Alberto
author_facet Ordaz, Alberto
Oliveira, Catarina S.
Aguilar, Ricardo
Carrión, Manuel
Ferreira, Eugénio C.
Alves, M. M.
Thalasso, Frédéric
author_role author
author2 Oliveira, Catarina S.
Aguilar, Ricardo
Carrión, Manuel
Ferreira, Eugénio C.
Alves, M. M.
Thalasso, Frédéric
author2_role author
author
author
author
author
author
dc.contributor.none.fl_str_mv Universidade do Minho
dc.contributor.author.fl_str_mv Ordaz, Alberto
Oliveira, Catarina S.
Aguilar, Ricardo
Carrión, Manuel
Ferreira, Eugénio C.
Alves, M. M.
Thalasso, Frédéric
dc.subject.por.fl_str_mv Respirometry
Growth yield
In-situ pulse technique
Kinetic parameters
Science & Technology
topic Respirometry
Growth yield
In-situ pulse technique
Kinetic parameters
Science & Technology
description This article proposes a simple "in-situ" pulse respirometric method for the estimation of four important kinetic and stoichiometric parameters. The method is validated in a suspended biomass nitrifying reactor for the determination of (i) maximum oxygen uptake rate (OURexmax), (ii) oxidation yield (fE), (iii) biomass growth yield (fS), and (iv) affinity constant (KS). OURexmax and fE were directly obtained from respirograms. In the presented case study, a minimum substrate pulse of 10 mgNH4+-NL-1 was necessary to determine OURexmax which was 61.15 ± 4.09 mgO2 L-1 h-1 (5 repetitions). A linear correlation (r2 = 0.93) obtained between OURexmax and the biomass concentration in the reactor suggests that biomass concentration can be estimated from respirometric experiments. The substrate oxidation yield, fE, was determined along 60 days of continuous operation with an average error of 5.6%. The biomass growth yield was indirectly estimated from the substrate oxidation yield fE. The average obtained value (0.10 ± 0.04 mgCOD mg-1COD) was in accordance with the fS estimation by the traditional COD mass balance method under steady-state conditions (0.09 ± 0.01). The affinity constant KS was indirectly estimated after fitting the ascending part of the respirogram to a theoretical model. An average value of 0.48 ± 0.08 mgNH4+-NL-1 was obtained, which is in the range of affinity constants reported in the literature for the nitrification process (0.16-2 mgNH4+-NL-1).
publishDate 2008
dc.date.none.fl_str_mv 2008-05
2008-05-01T00:00:00Z
dc.type.status.fl_str_mv info:eu-repo/semantics/publishedVersion
dc.type.driver.fl_str_mv info:eu-repo/semantics/article
format article
status_str publishedVersion
dc.identifier.uri.fl_str_mv https://hdl.handle.net/1822/7799
url https://hdl.handle.net/1822/7799
dc.language.iso.fl_str_mv eng
language eng
dc.relation.none.fl_str_mv "Biotechnology and Bioengineering". ISSN 0006-3592. 100:1 (May 2008) 94-102.
0006-3592
10.1002/bit.21723
18078297
dc.rights.driver.fl_str_mv info:eu-repo/semantics/openAccess
eu_rights_str_mv openAccess
dc.format.none.fl_str_mv application/pdf
dc.publisher.none.fl_str_mv John Wiley and Sons
publisher.none.fl_str_mv John Wiley and Sons
dc.source.none.fl_str_mv reponame:Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos)
instname:Agência para a Sociedade do Conhecimento (UMIC) - FCT - Sociedade da Informação
instacron:RCAAP
instname_str Agência para a Sociedade do Conhecimento (UMIC) - FCT - Sociedade da Informação
instacron_str RCAAP
institution RCAAP
reponame_str Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos)
collection Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos)
repository.name.fl_str_mv Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos) - Agência para a Sociedade do Conhecimento (UMIC) - FCT - Sociedade da Informação
repository.mail.fl_str_mv
_version_ 1799132511676137472