HBM4EU chromates study: determinants of exposure to hexavalent chromium in plating, welding and other occupational settings

• Autor(a) principal: Viegas, Susana
• Data de Publicação: 2022
• Outros Autores: Martins, Carla, Bocca, Beatrice, Bousoumah, Radia, Duca, Radu Corneliu, Galea, Karen S., Godderis, Lode, Iavicoli, Ivo, Janasik, Beata, Jones, Kate, Leese, Elizabeth, Leso, Veruscka, Ndaw, Sophie, van Nieuwenhuyse, An, Poels, Katrien, Porras, Simo P., Ruggieri, Flavia, Silva, Maria João, Verdonck, Jelle, Wasowicz, Wojciech, Scheepers, Paul T. J., Santonen, Tiina, Ladeira, Carina, Ribeiro, Edna
• Tipo de documento: Artigo
• Idioma: eng
• Título da fonte: Repositório Científico de Acesso Aberto de Portugal (Repositórios Cientìficos)
• Texto Completo: http://hdl.handle.net/10400.21/14590
• topic: Occupational health; Occupational exposure; Hexavalent chromium; Exposure determinants; Risk management measures; Occupational hygiene; Biomonitoring; Air monitoring; Dermal exposure; HBM4EU

Work-related exposures in industrial processing of chromate (chrome plating, surface treatment, and welding) raise concerns regarding the health risk of hexavalent chromium (Cr(VI)). In this study, performed under the HBM4EU project, we focused on better understanding the determinants of exposure and recognising how risk management measures (RMMs) contribute to a reduction in exposure. HBM and occupational hygiene data were collected from 399 workers and 203 controls recruited in nine European countries. Urinary total chromium (U-Cr), personal inhalable and respirable dust of Cr and Cr(VI), and Cr from hand wipes were collected. Data on the RMMs were collected by questionnaires. We studied the association between different exposure parameters and the use of RMMs. The relationship between exposure by inhalation and U-Cr in different worker groups was analysed using regression analysis and found a strong association. Automatisation of Cr electroplating dipping explained lower exposure levels in platers. The use of personal protective equipment resulted in lower U-Cr levels in welding, bath plating, and painting. An effect of wearing gloves was observed in machining. An effect of local exhaust ventilation and training was observed in welding. Regression analyses showed that in platers, exposure to an air level of 5 µg/m3 corresponds to a U-Cr level of 7 µg/g of creatinine. In welders, the same inhalation exposure resulted in lower U-Cr levels reflecting toxicokinetic differences of different chromium species.