NEW APPLICATIONS FOR AMOXICILLIN DETERMINATION IN PURE FORM AND PHARMACEUTICALS BASED ON IODATE-IODIDE MIXTURE: TITRIMETRY AND SPECTROSCOPY STUDIES

• Autor(a) principal: Qarah,Nagib A. S.
• Data de Publicação: 2020
• Outros Autores: Abdulrahman,Sameer A. M., Algethami,Faisal K., Basavaiah,Kanakapura, El-Maaiden,Ezzouhra
• Tipo de documento: Artigo
• Idioma: eng
• Título da fonte: Química Nova (Online)
• Texto Completo: http://old.scielo.br/scielo.php?script=sci_arttext&pid=S0100-40422020000100044
• topic: amoxicillin; assay; titrimetry; spectrophotometry; iodate

Three simple methods are described for the determination of amoxicillin (AMX) in bulk drug and dosage forms using iodate-iodide mixture reagent. These methods employed the well-known analytical reaction between iodate-iodide mixture in the presence of acid solution. The iodide oxidized by iodate to iodine in an amount equivalent to the -COOH group present in amoxicillin (AMX) and the liberated iodine determined by titrimetry and spectrophotometry. In the titrimetric method (method A), the liberated iodine was reacted with a measured excess of thiosulphate and the residual thiosulphate was determined by titration with a standard iodine solution using starch indicator, the method was applicable over 2 - 16 mg of AMX. In the second and third methods, the absorbance of the liberated iodine was measured at 370 nm (method B) and also iodine was reacted with starch and starch-iodine complex was measured at 570 nm (method C). In spectrophotometric methods (B and C), Beer’s law was obeyed over the concentration range of 5 - 50 and 5 - 60 µg mL-1 AMX with a molar absorptivity values of 5.55×103 L mol-1 cm-1 and 4.76×103 L mol-1 cm-1 for the method A and method B, respectively. The limits of detection (LOD) and quantification (LOQ) were calculated for method B and method C. The proposed methods were found to yield reliable results when applied to bulk drug and dosage forms analysis, and hence they can be applied in quality control laboratories.