Desenvolvimento de procedimentos de digestão para óleos lubrificantes.

Detalhes bibliográficos
Autor(a) principal: Bressani, Flavia Aline
Data de Publicação: 2005
Tipo de documento: Dissertação
Idioma: por
Título da fonte: Repositório Institucional da UFSCAR
Texto Completo: https://repositorio.ufscar.br/handle/ufscar/6617
Resumo: In this work it was developed a digestion procedure for lubricant oil based on gradual addition of sample aliquots on hot and concentrated oxidant acids. The element concentrations in the diluted digestates were determined by inductively coupled plasma optical emission spectrometry with axial viewing (ICP OES). The determination of these metals in lubricant oils is relevant because they can indicate wearing and contamination processes, and presence of additives. The transference of lubricant oil aliquots using either a peristaltic pump or a syringe type pump is not feasible due to the high viscosity of the sample. Thus, two alternative strategies were developed: use of a mechanized system for gradual and controlled addition of oil aliquots to concentrated acids heated by conductive heating and addition of encapsulate oil aliquots to concentrated acids heated by microwave radiation. The resulting digestates presented low residual acidities and carbon contents indicating an efficient digestion process using both procedures. The low acidity of the digestates allows the employ of low dilution factors that improve detection power for ICP OES measurements. Using conductive heating, a mass of 600 mg of oil was digested using 10 mL H2SO4. On the other hand, the microwaveassisted heated acid procedure was effective for digesting this same amount of sample using 3 mL H2SO4 plus 4 mL HNO3. Concentrated hydrogen peroxide was added in the last step in both procedures. In all cases the digestates presented residual carbon contents lower than 2.77% m/m and the residual acidities were around 1 mol/L for 10-fold diluted digestates. Determined and certified values for Ca, Mg, P, and Zn were in agreement at a 95% confidence level.
id SCAR_5c63f38e2a0f1b981101f81132cb4d72
oai_identifier_str oai:repositorio.ufscar.br:ufscar/6617
network_acronym_str SCAR
network_name_str Repositório Institucional da UFSCAR
repository_id_str 4322
spelling Bressani, Flavia AlineNóbrega, Joaquim de Araújohttp://lattes.cnpq.br/8833989058164529d540ed7c-f509-469d-8827-9dfd1382d3ed2016-06-02T20:36:57Z2005-07-152016-06-02T20:36:57Z2005-04-29BRESSANI, Flavia Aline. Development of digestion procedures for lubrificant oils.. 2005. 95 f. Dissertação (Mestrado em Ciências Exatas e da Terra) - Universidade Federal de São Carlos, São Carlos, 2005.https://repositorio.ufscar.br/handle/ufscar/6617In this work it was developed a digestion procedure for lubricant oil based on gradual addition of sample aliquots on hot and concentrated oxidant acids. The element concentrations in the diluted digestates were determined by inductively coupled plasma optical emission spectrometry with axial viewing (ICP OES). The determination of these metals in lubricant oils is relevant because they can indicate wearing and contamination processes, and presence of additives. The transference of lubricant oil aliquots using either a peristaltic pump or a syringe type pump is not feasible due to the high viscosity of the sample. Thus, two alternative strategies were developed: use of a mechanized system for gradual and controlled addition of oil aliquots to concentrated acids heated by conductive heating and addition of encapsulate oil aliquots to concentrated acids heated by microwave radiation. The resulting digestates presented low residual acidities and carbon contents indicating an efficient digestion process using both procedures. The low acidity of the digestates allows the employ of low dilution factors that improve detection power for ICP OES measurements. Using conductive heating, a mass of 600 mg of oil was digested using 10 mL H2SO4. On the other hand, the microwaveassisted heated acid procedure was effective for digesting this same amount of sample using 3 mL H2SO4 plus 4 mL HNO3. Concentrated hydrogen peroxide was added in the last step in both procedures. In all cases the digestates presented residual carbon contents lower than 2.77% m/m and the residual acidities were around 1 mol/L for 10-fold diluted digestates. Determined and certified values for Ca, Mg, P, and Zn were in agreement at a 95% confidence level.Neste trabalho desenvolveu-se um procedimento de digestão baseado na adição gradual de amostra ao reagente aquecido para amostras de óleo lubrificante visando análise elementar por espectrometria de emissão óptica com plasma acoplado indutivamente com visão axial (ICP OES). Há um grande interesse na análise elementar pois a variação das concentrações de elementos presentes em óleos lubrificantes pode fornecer informações sobre o desgaste de componentes mecânicos, contaminação e aditivos. Como a alta viscosidade do óleo lubrificante inviabiliza a transferência de alíquotas por bombeamento peristáltico ou utilizando bomba tipo seringa, foram estudadas duas estratégias alternativas para a digestão de óleo lubrificante usando o procedimento de adição da amostra sobre o ácido aquecido: transferência gradual e controlada de alíquotas de óleo lubrificante com o auxílio de um sistema mecanizado sobre o ácido aquecido por aquecimento condutivo e adição do óleo encapsulado ao ácido aquecido por ação de radiação microondas. Os digeridos obtidos foram avaliados segundo a acidez e o teor de carbono residual e apresentaram resultados adequados. Baixos valores de acidez implicam em menores diluições para a análise elementar por ICP OES e maior poder de detecção. Baixos teores de carbono residual (RCC) indicam que a matriz orgânica foi eficientemente destruída. Melhores resultados foram obtidos com aproximadamente 600 mg de óleo adicionado com o sistema mecanizado sobre 10 mL de H2SO4 aquecido em banho de areia e, quando encapsulado, adicionado sobre uma mistura contendo 3 mL de H2SO4 e 4 mL de HNO3. Em ambos os procedimentos, a digestão foi finalizada com a adição de H2O2 concentrado. Resultados para carbono residual foram inferiores a 2,77% m/m e os digeridos introduzidos no ICP OES apresentaram acidez de aproximadamente 1 mol/L para fatores de diluição de 10 vezes. Teores determinados para Ca, Mg, P e Zn foram concordantes com os teores certificados para um nível de confiança de 95%.Universidade Federal de Minas Geraisapplication/pdfporUniversidade Federal de São CarlosPrograma de Pós-Graduação em Química - PPGQUFSCarBRPreparação de amostra (química analítica)DigestãoÓleos lubrificantesCarbono residualCIENCIAS EXATAS E DA TERRA::QUIMICA::QUIMICA ANALITICADesenvolvimento de procedimentos de digestão para óleos lubrificantes.Development of digestion procedures for lubrificant oils.info:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/masterThesis-1-134c8c01d-b96b-428f-acbc-937c5a211684info:eu-repo/semantics/openAccessreponame:Repositório Institucional da UFSCARinstname:Universidade Federal de São Carlos (UFSCAR)instacron:UFSCARORIGINALDissFAB.pdfapplication/pdf1058173https://repositorio.ufscar.br/bitstream/ufscar/6617/1/DissFAB.pdffe573243ac6da00216ecb5d7c50a0414MD51THUMBNAILDissFAB.pdf.jpgDissFAB.pdf.jpgIM Thumbnailimage/jpeg9160https://repositorio.ufscar.br/bitstream/ufscar/6617/2/DissFAB.pdf.jpg8af51d4f9e6fb179cbbf0e02ff40ed55MD52ufscar/66172023-09-18 18:31:12.163oai:repositorio.ufscar.br:ufscar/6617Repositório InstitucionalPUBhttps://repositorio.ufscar.br/oai/requestopendoar:43222023-09-18T18:31:12Repositório Institucional da UFSCAR - Universidade Federal de São Carlos (UFSCAR)false
dc.title.por.fl_str_mv Desenvolvimento de procedimentos de digestão para óleos lubrificantes.
dc.title.alternative.eng.fl_str_mv Development of digestion procedures for lubrificant oils.
title Desenvolvimento de procedimentos de digestão para óleos lubrificantes.
spellingShingle Desenvolvimento de procedimentos de digestão para óleos lubrificantes.
Bressani, Flavia Aline
Preparação de amostra (química analítica)
Digestão
Óleos lubrificantes
Carbono residual
CIENCIAS EXATAS E DA TERRA::QUIMICA::QUIMICA ANALITICA
title_short Desenvolvimento de procedimentos de digestão para óleos lubrificantes.
title_full Desenvolvimento de procedimentos de digestão para óleos lubrificantes.
title_fullStr Desenvolvimento de procedimentos de digestão para óleos lubrificantes.
title_full_unstemmed Desenvolvimento de procedimentos de digestão para óleos lubrificantes.
title_sort Desenvolvimento de procedimentos de digestão para óleos lubrificantes.
author Bressani, Flavia Aline
author_facet Bressani, Flavia Aline
author_role author
dc.contributor.author.fl_str_mv Bressani, Flavia Aline
dc.contributor.advisor1.fl_str_mv Nóbrega, Joaquim de Araújo
dc.contributor.advisor1Lattes.fl_str_mv http://lattes.cnpq.br/8833989058164529
dc.contributor.authorID.fl_str_mv d540ed7c-f509-469d-8827-9dfd1382d3ed
contributor_str_mv Nóbrega, Joaquim de Araújo
dc.subject.por.fl_str_mv Preparação de amostra (química analítica)
Digestão
Óleos lubrificantes
Carbono residual
topic Preparação de amostra (química analítica)
Digestão
Óleos lubrificantes
Carbono residual
CIENCIAS EXATAS E DA TERRA::QUIMICA::QUIMICA ANALITICA
dc.subject.cnpq.fl_str_mv CIENCIAS EXATAS E DA TERRA::QUIMICA::QUIMICA ANALITICA
description In this work it was developed a digestion procedure for lubricant oil based on gradual addition of sample aliquots on hot and concentrated oxidant acids. The element concentrations in the diluted digestates were determined by inductively coupled plasma optical emission spectrometry with axial viewing (ICP OES). The determination of these metals in lubricant oils is relevant because they can indicate wearing and contamination processes, and presence of additives. The transference of lubricant oil aliquots using either a peristaltic pump or a syringe type pump is not feasible due to the high viscosity of the sample. Thus, two alternative strategies were developed: use of a mechanized system for gradual and controlled addition of oil aliquots to concentrated acids heated by conductive heating and addition of encapsulate oil aliquots to concentrated acids heated by microwave radiation. The resulting digestates presented low residual acidities and carbon contents indicating an efficient digestion process using both procedures. The low acidity of the digestates allows the employ of low dilution factors that improve detection power for ICP OES measurements. Using conductive heating, a mass of 600 mg of oil was digested using 10 mL H2SO4. On the other hand, the microwaveassisted heated acid procedure was effective for digesting this same amount of sample using 3 mL H2SO4 plus 4 mL HNO3. Concentrated hydrogen peroxide was added in the last step in both procedures. In all cases the digestates presented residual carbon contents lower than 2.77% m/m and the residual acidities were around 1 mol/L for 10-fold diluted digestates. Determined and certified values for Ca, Mg, P, and Zn were in agreement at a 95% confidence level.
publishDate 2005
dc.date.available.fl_str_mv 2005-07-15
2016-06-02T20:36:57Z
dc.date.issued.fl_str_mv 2005-04-29
dc.date.accessioned.fl_str_mv 2016-06-02T20:36:57Z
dc.type.status.fl_str_mv info:eu-repo/semantics/publishedVersion
dc.type.driver.fl_str_mv info:eu-repo/semantics/masterThesis
format masterThesis
status_str publishedVersion
dc.identifier.citation.fl_str_mv BRESSANI, Flavia Aline. Development of digestion procedures for lubrificant oils.. 2005. 95 f. Dissertação (Mestrado em Ciências Exatas e da Terra) - Universidade Federal de São Carlos, São Carlos, 2005.
dc.identifier.uri.fl_str_mv https://repositorio.ufscar.br/handle/ufscar/6617
identifier_str_mv BRESSANI, Flavia Aline. Development of digestion procedures for lubrificant oils.. 2005. 95 f. Dissertação (Mestrado em Ciências Exatas e da Terra) - Universidade Federal de São Carlos, São Carlos, 2005.
url https://repositorio.ufscar.br/handle/ufscar/6617
dc.language.iso.fl_str_mv por
language por
dc.relation.confidence.fl_str_mv -1
-1
dc.relation.authority.fl_str_mv 34c8c01d-b96b-428f-acbc-937c5a211684
dc.rights.driver.fl_str_mv info:eu-repo/semantics/openAccess
eu_rights_str_mv openAccess
dc.format.none.fl_str_mv application/pdf
dc.publisher.none.fl_str_mv Universidade Federal de São Carlos
dc.publisher.program.fl_str_mv Programa de Pós-Graduação em Química - PPGQ
dc.publisher.initials.fl_str_mv UFSCar
dc.publisher.country.fl_str_mv BR
publisher.none.fl_str_mv Universidade Federal de São Carlos
dc.source.none.fl_str_mv reponame:Repositório Institucional da UFSCAR
instname:Universidade Federal de São Carlos (UFSCAR)
instacron:UFSCAR
instname_str Universidade Federal de São Carlos (UFSCAR)
instacron_str UFSCAR
institution UFSCAR
reponame_str Repositório Institucional da UFSCAR
collection Repositório Institucional da UFSCAR
bitstream.url.fl_str_mv https://repositorio.ufscar.br/bitstream/ufscar/6617/1/DissFAB.pdf
https://repositorio.ufscar.br/bitstream/ufscar/6617/2/DissFAB.pdf.jpg
bitstream.checksum.fl_str_mv fe573243ac6da00216ecb5d7c50a0414
8af51d4f9e6fb179cbbf0e02ff40ed55
bitstream.checksumAlgorithm.fl_str_mv MD5
MD5
repository.name.fl_str_mv Repositório Institucional da UFSCAR - Universidade Federal de São Carlos (UFSCAR)
repository.mail.fl_str_mv
_version_ 1802136296404025344