Produção e caracterização de filmes de polpa de mamão com adições de nanoestruturas, processados em modo batelada
Autor(a) principal: | |
---|---|
Data de Publicação: | 2016 |
Tipo de documento: | Dissertação |
Idioma: | por |
Título da fonte: | Repositório Institucional da UFSCAR |
Texto Completo: | https://repositorio.ufscar.br/handle/ufscar/8601 |
Resumo: | The production of biodegradable films based on renewable low cost resources has increased considerably. The research and development of new materials in this segment make possible to replace, even still partially, the synthetic plastics derived from petrol and to add value to agro-industrial waste and agricultural commodities. The fruit purees (or pulp) represent an alternative for obtaining these low-cost arrays. It can be obtained from the fruit itself or from its processing wastes. Amongst the suited fruits for this purpose is the papaya (Carica papaya), largely available. Brazil is the largest producer of this fruit and, due to its high perishability, is a rich source of waste material for pulp and edible film processing. Although the films prepared from fruit puree lacks in mechanical and permeability properties, such features may be minimized by the addition of nanofillers associated to film forming biopolymers. Thus, the evaluation of papaya puree, in over-ripe stage, as raw material for film processing using a Mathis System (in batch mode) with reinforced nanostructure was the main aim of this study. The films were characterized considering mechanical and thermal properties, permeability, colorimetric and antimicrobial activity. The best results were recorded to formulations in which the pectin was added at 0.5 % (w/v), increasing the maximum fracture strength (σmax), in 12 times when compared to neat puree films (control). The insertion of cellulose nanofibers and chitosan nanoparticles also promoted a σmax increasing, nevertheless in inferior proportion (6.2 and 5 times respectively). The presence of pectin also was positive in reducing the permeability rates (WVP) with values of 77.72 % lower than those measured to the control films. Concerning the colorimetric properties, the films with filler additions (chitosan nanoparticles with glycerol) suffered the greater color changes (ΔE). The addition of chitosan nanoparticles also speed the surface browning index (BI). Again the pectin acted positively in preserving the original color characteristics. The antimicrobial essays indicated that the chitosan in nanoparticle format inside the polymeric matrix did not present any antimicrobial activity. The over-ripe papaya pulp showed to be a raw material suitable for edible biodegradable film processing and the addition of nanofillers and pectin necessary to improve the barrier and mechanical properties and to preserve the original colorimetric features. |
id |
SCAR_937d2fcb061d4cc25014163684da14dc |
---|---|
oai_identifier_str |
oai:repositorio.ufscar.br:ufscar/8601 |
network_acronym_str |
SCAR |
network_name_str |
Repositório Institucional da UFSCAR |
repository_id_str |
4322 |
spelling |
Barros, Taís Téo deAssis, Odílio Benedito Garrido dehttp://lattes.cnpq.br/4626267791983725Bernardes Filho, Rubenshttp://lattes.cnpq.br/4955439483175452http://lattes.cnpq.br/1423196539001121eadcb54b-309b-43ea-b14f-badb81e45cbd2017-03-22T19:26:28Z2017-03-22T19:26:28Z2016-02-26BARROS, Taís Téo de. Produção e caracterização de filmes de polpa de mamão com adições de nanoestruturas, processados em modo batelada. 2016. Dissertação (Mestrado em Biotecnologia) – Universidade Federal de São Carlos, São Carlos, 2016. Disponível em: https://repositorio.ufscar.br/handle/ufscar/8601.https://repositorio.ufscar.br/handle/ufscar/8601The production of biodegradable films based on renewable low cost resources has increased considerably. The research and development of new materials in this segment make possible to replace, even still partially, the synthetic plastics derived from petrol and to add value to agro-industrial waste and agricultural commodities. The fruit purees (or pulp) represent an alternative for obtaining these low-cost arrays. It can be obtained from the fruit itself or from its processing wastes. Amongst the suited fruits for this purpose is the papaya (Carica papaya), largely available. Brazil is the largest producer of this fruit and, due to its high perishability, is a rich source of waste material for pulp and edible film processing. Although the films prepared from fruit puree lacks in mechanical and permeability properties, such features may be minimized by the addition of nanofillers associated to film forming biopolymers. Thus, the evaluation of papaya puree, in over-ripe stage, as raw material for film processing using a Mathis System (in batch mode) with reinforced nanostructure was the main aim of this study. The films were characterized considering mechanical and thermal properties, permeability, colorimetric and antimicrobial activity. The best results were recorded to formulations in which the pectin was added at 0.5 % (w/v), increasing the maximum fracture strength (σmax), in 12 times when compared to neat puree films (control). The insertion of cellulose nanofibers and chitosan nanoparticles also promoted a σmax increasing, nevertheless in inferior proportion (6.2 and 5 times respectively). The presence of pectin also was positive in reducing the permeability rates (WVP) with values of 77.72 % lower than those measured to the control films. Concerning the colorimetric properties, the films with filler additions (chitosan nanoparticles with glycerol) suffered the greater color changes (ΔE). The addition of chitosan nanoparticles also speed the surface browning index (BI). Again the pectin acted positively in preserving the original color characteristics. The antimicrobial essays indicated that the chitosan in nanoparticle format inside the polymeric matrix did not present any antimicrobial activity. The over-ripe papaya pulp showed to be a raw material suitable for edible biodegradable film processing and the addition of nanofillers and pectin necessary to improve the barrier and mechanical properties and to preserve the original colorimetric features.A produção de filmes biodegradáveis baseados em recursos renováveis, fazendo uso de matrizes biopoliméricas de baixo custo, vem aumentando consideravelmente. A pesquisa e o desenvolvimento de novos materiais neste segmento possibilitam a substituição, ainda que parcial, dos plásticos sintéticos derivados do petróleo, além de agregar valor a resíduos agroindustriais e commodities agrícolas. Os purês de frutas (ou polpa) representam uma alternativa viável para a obtenção destas matrizes, podendo ser empregados a própria fruta ou rejeitos provenientes de seu processamento. Dentre os frutos adequados para este fim está o mamão papaia (Carica papaya), fartamente disponível no país. O Brasil é seu maior produtor mundial e, devido à sua alta perecividade, é uma fonte rica de rejeitos adequados à produção de polpas e ao processamento de filmes comestíveis. Embora os filmes processados a partir de purê de frutas apresentem limitações mecânicas e de permeabilidade, estas características podem ser minimizadas pela formação de compósitos através da inserção de nanoestruturas de reforço e associação com outros biopolímeros com características filmogênicas. Assim, avaliar o uso de polpas de mamão papaia, em adiantado estado de maturação no processamento de filmes em Sistema Mathis (no modo batelada) e o efeito da inserção de estruturas de reforço, foram os principais objetivos deste trabalho. Os filmes foram caracterizados quanto às suas propriedades mecânicas, térmica, de permeabilidade, colorimétrica e antimicrobiana. Os melhores resultados foram obtidos para as composições em que a pectina foi adiciona em 0,5 % (m/v), elevando a tensão máxima de ruptura (σmax), em 12 vezes quando comparada aos filmes de polpa sem aditivos (controle). A adição de nanofibras de celulose e a nanopartículas de quitosana também melhoraram σmax, mas em valores inferiores (6,2 e 5 vezes respectivamente). A inserção da pectina também foi favorável na redução das taxas de permeabilidade (WVP) com valores 77,72 % inferiores aos filmes controle. Com relação às medidas colorimétricas, as maiores alterações registradas foram para os filmes processados com os reforços (quitosana em conjunto com o glicerol), os quais resultaram em uma maior variação total de cor (ΔE). A presença de nanopartículas de quitosana também acelerou o escurecimento superficial (IE). A adição de pectina nas formulações atuou positivamente na preservação das características colorimétricas iniciais. Os testes antimicrobianos indicaram que a quitosana na forma de nanopartículas inseridas na matriz biopolimérica não apresentou atividade antimicrobiana. A polpa de mamão papaia, na condição sobremadura, mostrou ser uma matéria-prima adequada ao processamento de filmes comestíveis biodegradáveis e a adição de nanoreforços e de pectina necessárias para a melhoria das propriedades mecânicas e de barreira e para a preservação das características colorimétricas iniciais dos filmes.Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)Empresa Brasileira de Pesquisa Agropecuária (EMBRAPA)porUniversidade Federal de São CarlosCâmpus São CarlosPrograma de Pós-Graduação em Biotecnologia - PPGBiotecUFSCarFilmes biodegradáveisFilmes comestíveisNanopartículas de quitosanaNanofibras de celuloseProcessamento por bateladaBiodegradable filmsEdible filmsChitosan nanoparticlesPectinCellulosic nanofibersBatch modeMathisOUTROSProdução e caracterização de filmes de polpa de mamão com adições de nanoestruturas, processados em modo bateladainfo:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/masterThesisOnline6006004ddd0b06-362a-4028-9041-15f7081c8f5binfo:eu-repo/semantics/openAccessreponame:Repositório Institucional da UFSCARinstname:Universidade Federal de São Carlos (UFSCAR)instacron:UFSCARORIGINALDissTTB.pdfDissTTB.pdfapplication/pdf2398693https://repositorio.ufscar.br/bitstream/ufscar/8601/1/DissTTB.pdf0a0148927746ba0af71705e6c51cb65eMD51LICENSElicense.txtlicense.txttext/plain; charset=utf-81957https://repositorio.ufscar.br/bitstream/ufscar/8601/2/license.txtae0398b6f8b235e40ad82cba6c50031dMD52TEXTDissTTB.pdf.txtDissTTB.pdf.txtExtracted texttext/plain125796https://repositorio.ufscar.br/bitstream/ufscar/8601/3/DissTTB.pdf.txt7a7742cc0adc8863b3423f06a8d0568aMD53THUMBNAILDissTTB.pdf.jpgDissTTB.pdf.jpgIM Thumbnailimage/jpeg5918https://repositorio.ufscar.br/bitstream/ufscar/8601/4/DissTTB.pdf.jpg6adc08b47d10c2f5197ec7247e2f1090MD54ufscar/86012023-09-18 18:31:08.758oai:repositorio.ufscar.br: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Repositório InstitucionalPUBhttps://repositorio.ufscar.br/oai/requestopendoar:43222023-09-18T18:31:08Repositório Institucional da UFSCAR - Universidade Federal de São Carlos (UFSCAR)false |
dc.title.por.fl_str_mv |
Produção e caracterização de filmes de polpa de mamão com adições de nanoestruturas, processados em modo batelada |
title |
Produção e caracterização de filmes de polpa de mamão com adições de nanoestruturas, processados em modo batelada |
spellingShingle |
Produção e caracterização de filmes de polpa de mamão com adições de nanoestruturas, processados em modo batelada Barros, Taís Téo de Filmes biodegradáveis Filmes comestíveis Nanopartículas de quitosana Nanofibras de celulose Processamento por batelada Biodegradable films Edible films Chitosan nanoparticles Pectin Cellulosic nanofibers Batch mode Mathis OUTROS |
title_short |
Produção e caracterização de filmes de polpa de mamão com adições de nanoestruturas, processados em modo batelada |
title_full |
Produção e caracterização de filmes de polpa de mamão com adições de nanoestruturas, processados em modo batelada |
title_fullStr |
Produção e caracterização de filmes de polpa de mamão com adições de nanoestruturas, processados em modo batelada |
title_full_unstemmed |
Produção e caracterização de filmes de polpa de mamão com adições de nanoestruturas, processados em modo batelada |
title_sort |
Produção e caracterização de filmes de polpa de mamão com adições de nanoestruturas, processados em modo batelada |
author |
Barros, Taís Téo de |
author_facet |
Barros, Taís Téo de |
author_role |
author |
dc.contributor.authorlattes.por.fl_str_mv |
http://lattes.cnpq.br/1423196539001121 |
dc.contributor.author.fl_str_mv |
Barros, Taís Téo de |
dc.contributor.advisor1.fl_str_mv |
Assis, Odílio Benedito Garrido de |
dc.contributor.advisor1Lattes.fl_str_mv |
http://lattes.cnpq.br/4626267791983725 |
dc.contributor.advisor-co1.fl_str_mv |
Bernardes Filho, Rubens |
dc.contributor.advisor-co1Lattes.fl_str_mv |
http://lattes.cnpq.br/4955439483175452 |
dc.contributor.authorID.fl_str_mv |
eadcb54b-309b-43ea-b14f-badb81e45cbd |
contributor_str_mv |
Assis, Odílio Benedito Garrido de Bernardes Filho, Rubens |
dc.subject.por.fl_str_mv |
Filmes biodegradáveis Filmes comestíveis Nanopartículas de quitosana Nanofibras de celulose Processamento por batelada |
topic |
Filmes biodegradáveis Filmes comestíveis Nanopartículas de quitosana Nanofibras de celulose Processamento por batelada Biodegradable films Edible films Chitosan nanoparticles Pectin Cellulosic nanofibers Batch mode Mathis OUTROS |
dc.subject.eng.fl_str_mv |
Biodegradable films Edible films Chitosan nanoparticles Pectin Cellulosic nanofibers Batch mode Mathis |
dc.subject.cnpq.fl_str_mv |
OUTROS |
description |
The production of biodegradable films based on renewable low cost resources has increased considerably. The research and development of new materials in this segment make possible to replace, even still partially, the synthetic plastics derived from petrol and to add value to agro-industrial waste and agricultural commodities. The fruit purees (or pulp) represent an alternative for obtaining these low-cost arrays. It can be obtained from the fruit itself or from its processing wastes. Amongst the suited fruits for this purpose is the papaya (Carica papaya), largely available. Brazil is the largest producer of this fruit and, due to its high perishability, is a rich source of waste material for pulp and edible film processing. Although the films prepared from fruit puree lacks in mechanical and permeability properties, such features may be minimized by the addition of nanofillers associated to film forming biopolymers. Thus, the evaluation of papaya puree, in over-ripe stage, as raw material for film processing using a Mathis System (in batch mode) with reinforced nanostructure was the main aim of this study. The films were characterized considering mechanical and thermal properties, permeability, colorimetric and antimicrobial activity. The best results were recorded to formulations in which the pectin was added at 0.5 % (w/v), increasing the maximum fracture strength (σmax), in 12 times when compared to neat puree films (control). The insertion of cellulose nanofibers and chitosan nanoparticles also promoted a σmax increasing, nevertheless in inferior proportion (6.2 and 5 times respectively). The presence of pectin also was positive in reducing the permeability rates (WVP) with values of 77.72 % lower than those measured to the control films. Concerning the colorimetric properties, the films with filler additions (chitosan nanoparticles with glycerol) suffered the greater color changes (ΔE). The addition of chitosan nanoparticles also speed the surface browning index (BI). Again the pectin acted positively in preserving the original color characteristics. The antimicrobial essays indicated that the chitosan in nanoparticle format inside the polymeric matrix did not present any antimicrobial activity. The over-ripe papaya pulp showed to be a raw material suitable for edible biodegradable film processing and the addition of nanofillers and pectin necessary to improve the barrier and mechanical properties and to preserve the original colorimetric features. |
publishDate |
2016 |
dc.date.issued.fl_str_mv |
2016-02-26 |
dc.date.accessioned.fl_str_mv |
2017-03-22T19:26:28Z |
dc.date.available.fl_str_mv |
2017-03-22T19:26:28Z |
dc.type.status.fl_str_mv |
info:eu-repo/semantics/publishedVersion |
dc.type.driver.fl_str_mv |
info:eu-repo/semantics/masterThesis |
format |
masterThesis |
status_str |
publishedVersion |
dc.identifier.citation.fl_str_mv |
BARROS, Taís Téo de. Produção e caracterização de filmes de polpa de mamão com adições de nanoestruturas, processados em modo batelada. 2016. Dissertação (Mestrado em Biotecnologia) – Universidade Federal de São Carlos, São Carlos, 2016. Disponível em: https://repositorio.ufscar.br/handle/ufscar/8601. |
dc.identifier.uri.fl_str_mv |
https://repositorio.ufscar.br/handle/ufscar/8601 |
identifier_str_mv |
BARROS, Taís Téo de. Produção e caracterização de filmes de polpa de mamão com adições de nanoestruturas, processados em modo batelada. 2016. Dissertação (Mestrado em Biotecnologia) – Universidade Federal de São Carlos, São Carlos, 2016. Disponível em: https://repositorio.ufscar.br/handle/ufscar/8601. |
url |
https://repositorio.ufscar.br/handle/ufscar/8601 |
dc.language.iso.fl_str_mv |
por |
language |
por |
dc.relation.confidence.fl_str_mv |
600 600 |
dc.relation.authority.fl_str_mv |
4ddd0b06-362a-4028-9041-15f7081c8f5b |
dc.rights.driver.fl_str_mv |
info:eu-repo/semantics/openAccess |
eu_rights_str_mv |
openAccess |
dc.publisher.none.fl_str_mv |
Universidade Federal de São Carlos Câmpus São Carlos |
dc.publisher.program.fl_str_mv |
Programa de Pós-Graduação em Biotecnologia - PPGBiotec |
dc.publisher.initials.fl_str_mv |
UFSCar |
publisher.none.fl_str_mv |
Universidade Federal de São Carlos Câmpus São Carlos |
dc.source.none.fl_str_mv |
reponame:Repositório Institucional da UFSCAR instname:Universidade Federal de São Carlos (UFSCAR) instacron:UFSCAR |
instname_str |
Universidade Federal de São Carlos (UFSCAR) |
instacron_str |
UFSCAR |
institution |
UFSCAR |
reponame_str |
Repositório Institucional da UFSCAR |
collection |
Repositório Institucional da UFSCAR |
bitstream.url.fl_str_mv |
https://repositorio.ufscar.br/bitstream/ufscar/8601/1/DissTTB.pdf https://repositorio.ufscar.br/bitstream/ufscar/8601/2/license.txt https://repositorio.ufscar.br/bitstream/ufscar/8601/3/DissTTB.pdf.txt https://repositorio.ufscar.br/bitstream/ufscar/8601/4/DissTTB.pdf.jpg |
bitstream.checksum.fl_str_mv |
0a0148927746ba0af71705e6c51cb65e ae0398b6f8b235e40ad82cba6c50031d 7a7742cc0adc8863b3423f06a8d0568a 6adc08b47d10c2f5197ec7247e2f1090 |
bitstream.checksumAlgorithm.fl_str_mv |
MD5 MD5 MD5 MD5 |
repository.name.fl_str_mv |
Repositório Institucional da UFSCAR - Universidade Federal de São Carlos (UFSCAR) |
repository.mail.fl_str_mv |
|
_version_ |
1802136321188167680 |