Secagem de resíduos cítricos em secador rotativo
Autor(a) principal: | |
---|---|
Data de Publicação: | 2011 |
Tipo de documento: | Dissertação |
Idioma: | por |
Título da fonte: | Repositório Institucional da UFSCAR |
Texto Completo: | https://repositorio.ufscar.br/handle/ufscar/6486 |
Resumo: | In this present work, an experimental study about simultaneous heat and mass transfer phenomena was carried out during the drying process of citric solid waste in a direct-heat contact semi-pilot rotary dryer, operating with continuous feed of solids. The drying experiments consisted of obtaining humidity and temperature data as function of time for the solid and gaseous phases, evaluating the influence of the operational variables of the process. The material characterization was studied in relation to the apparent and real specific masses, porosity, specific heat and hygroscopicity. The last one was determined by thermodynamic equilibrium conditions and by the thin-layer drying kinetics of the solid waste in a fixed bed dryer. In parallel, a two-phase mathematical model of lumped parameters was developed based on macroscopic balances of mass and energy for the solid and for the drying air. The differential algebraic system was solved numerically using a computer routine developed in MatLab®, where the drying process was simulated taking into consideration the particle residence time distribution inside the dryer. The comparison between the predicted and observed results showed that the model needs some improvement, but permits a preliminary qualitative analysis of the drying process. |
id |
SCAR_c6e832bd91c8f986ae6ff61022a79c2c |
---|---|
oai_identifier_str |
oai:repositorio.ufscar.br:ufscar/6486 |
network_acronym_str |
SCAR |
network_name_str |
Repositório Institucional da UFSCAR |
repository_id_str |
4322 |
spelling |
Perazzini, HugoFreire, José Teixeirahttp://lattes.cnpq.br/2270677706718167http://lattes.cnpq.br/267631154753541423aab8a6-9181-4279-b477-d42f580b0dfd2016-06-02T20:36:30Z2011-04-072016-06-02T20:36:30Z2011-03-03PERAZZINI, Hugo. Secagem de resíduos cítricos em secador rotativo. 2011. 104 f. Dissertação (Mestrado em Ciências Exatas e da Terra) - Universidade Federal de São Carlos, São Carlos, 2011.https://repositorio.ufscar.br/handle/ufscar/6486In this present work, an experimental study about simultaneous heat and mass transfer phenomena was carried out during the drying process of citric solid waste in a direct-heat contact semi-pilot rotary dryer, operating with continuous feed of solids. The drying experiments consisted of obtaining humidity and temperature data as function of time for the solid and gaseous phases, evaluating the influence of the operational variables of the process. The material characterization was studied in relation to the apparent and real specific masses, porosity, specific heat and hygroscopicity. The last one was determined by thermodynamic equilibrium conditions and by the thin-layer drying kinetics of the solid waste in a fixed bed dryer. In parallel, a two-phase mathematical model of lumped parameters was developed based on macroscopic balances of mass and energy for the solid and for the drying air. The differential algebraic system was solved numerically using a computer routine developed in MatLab®, where the drying process was simulated taking into consideration the particle residence time distribution inside the dryer. The comparison between the predicted and observed results showed that the model needs some improvement, but permits a preliminary qualitative analysis of the drying process.No presente trabalho, os fenômenos de transferência de calor e massa existentes no processo de secagem de resíduos cítricos foram estudados experimentalmente em um secador rotativo semi-piloto de contato direto e fluxos concorrentes, operando com alimentação contínua de sólidos. Os experimentos de secagem consistiram na obtenção de dados de umidade e temperatura em função do tempo para as fases sólida e fluida, avaliando a influência das principais variáveis operacionais de processo. A caracterização do material foi estudada em relação às massas específicas aparente e real, porosidade, calor específico e grau higroscópico. Este último, determinado através de condições de equilíbrio termodinâmico e pela cinética de secagem do resíduo em secador de leito fixo e camada delgada. Paralelamente, foi desenvolvido um modelo matemático dinâmico de parâmetros concentrados a duas fases, baseado em balanços macroscópicos de massa e energia para o sólido e para o ar de secagem. O sistema algébrico-diferencial foi resolvido numericamente por uma rotina computacional desenvolvida em linguagem MatLab®, onde o processo de secagem era simulado considerando a distribuição de tempos de residência das partículas no interior do secador. A comparação entre resultados preditos e observados mostrou que o modelo matemático proposto necessita de aprimoramento, mas permite uma análise preliminar qualitativa da operação de secagem.Universidade Federal de Sao Carlosapplication/pdfporUniversidade Federal de São CarlosPrograma de Pós-Graduação em Química - PPGQUFSCarBREngenharia químicaResíduos industriaisMassa - transferenciaCalor - transmissãoModelagemENGENHARIAS::ENGENHARIA QUIMICASecagem de resíduos cítricos em secador rotativoinfo:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/masterThesis-1-12e542afc-9fec-43b4-b11a-1eb2ed3a1f3dinfo:eu-repo/semantics/openAccessreponame:Repositório Institucional da UFSCARinstname:Universidade Federal de São Carlos (UFSCAR)instacron:UFSCARORIGINAL3516.pdfapplication/pdf1760972https://repositorio.ufscar.br/bitstream/ufscar/6486/1/3516.pdf4d0f2531bdae61efc9d1492d1c35c56cMD51THUMBNAIL3516.pdf.jpg3516.pdf.jpgIM Thumbnailimage/jpeg5763https://repositorio.ufscar.br/bitstream/ufscar/6486/2/3516.pdf.jpg55e00652e2b4ec18762efa951e711207MD52ufscar/64862023-09-18 18:31:11.571oai:repositorio.ufscar.br:ufscar/6486Repositório InstitucionalPUBhttps://repositorio.ufscar.br/oai/requestopendoar:43222023-09-18T18:31:11Repositório Institucional da UFSCAR - Universidade Federal de São Carlos (UFSCAR)false |
dc.title.por.fl_str_mv |
Secagem de resíduos cítricos em secador rotativo |
title |
Secagem de resíduos cítricos em secador rotativo |
spellingShingle |
Secagem de resíduos cítricos em secador rotativo Perazzini, Hugo Engenharia química Resíduos industriais Massa - transferencia Calor - transmissão Modelagem ENGENHARIAS::ENGENHARIA QUIMICA |
title_short |
Secagem de resíduos cítricos em secador rotativo |
title_full |
Secagem de resíduos cítricos em secador rotativo |
title_fullStr |
Secagem de resíduos cítricos em secador rotativo |
title_full_unstemmed |
Secagem de resíduos cítricos em secador rotativo |
title_sort |
Secagem de resíduos cítricos em secador rotativo |
author |
Perazzini, Hugo |
author_facet |
Perazzini, Hugo |
author_role |
author |
dc.contributor.authorlattes.por.fl_str_mv |
http://lattes.cnpq.br/2676311547535414 |
dc.contributor.author.fl_str_mv |
Perazzini, Hugo |
dc.contributor.advisor1.fl_str_mv |
Freire, José Teixeira |
dc.contributor.advisor1Lattes.fl_str_mv |
http://lattes.cnpq.br/2270677706718167 |
dc.contributor.authorID.fl_str_mv |
23aab8a6-9181-4279-b477-d42f580b0dfd |
contributor_str_mv |
Freire, José Teixeira |
dc.subject.por.fl_str_mv |
Engenharia química Resíduos industriais Massa - transferencia Calor - transmissão Modelagem |
topic |
Engenharia química Resíduos industriais Massa - transferencia Calor - transmissão Modelagem ENGENHARIAS::ENGENHARIA QUIMICA |
dc.subject.cnpq.fl_str_mv |
ENGENHARIAS::ENGENHARIA QUIMICA |
description |
In this present work, an experimental study about simultaneous heat and mass transfer phenomena was carried out during the drying process of citric solid waste in a direct-heat contact semi-pilot rotary dryer, operating with continuous feed of solids. The drying experiments consisted of obtaining humidity and temperature data as function of time for the solid and gaseous phases, evaluating the influence of the operational variables of the process. The material characterization was studied in relation to the apparent and real specific masses, porosity, specific heat and hygroscopicity. The last one was determined by thermodynamic equilibrium conditions and by the thin-layer drying kinetics of the solid waste in a fixed bed dryer. In parallel, a two-phase mathematical model of lumped parameters was developed based on macroscopic balances of mass and energy for the solid and for the drying air. The differential algebraic system was solved numerically using a computer routine developed in MatLab®, where the drying process was simulated taking into consideration the particle residence time distribution inside the dryer. The comparison between the predicted and observed results showed that the model needs some improvement, but permits a preliminary qualitative analysis of the drying process. |
publishDate |
2011 |
dc.date.available.fl_str_mv |
2011-04-07 2016-06-02T20:36:30Z |
dc.date.issued.fl_str_mv |
2011-03-03 |
dc.date.accessioned.fl_str_mv |
2016-06-02T20:36:30Z |
dc.type.status.fl_str_mv |
info:eu-repo/semantics/publishedVersion |
dc.type.driver.fl_str_mv |
info:eu-repo/semantics/masterThesis |
format |
masterThesis |
status_str |
publishedVersion |
dc.identifier.citation.fl_str_mv |
PERAZZINI, Hugo. Secagem de resíduos cítricos em secador rotativo. 2011. 104 f. Dissertação (Mestrado em Ciências Exatas e da Terra) - Universidade Federal de São Carlos, São Carlos, 2011. |
dc.identifier.uri.fl_str_mv |
https://repositorio.ufscar.br/handle/ufscar/6486 |
identifier_str_mv |
PERAZZINI, Hugo. Secagem de resíduos cítricos em secador rotativo. 2011. 104 f. Dissertação (Mestrado em Ciências Exatas e da Terra) - Universidade Federal de São Carlos, São Carlos, 2011. |
url |
https://repositorio.ufscar.br/handle/ufscar/6486 |
dc.language.iso.fl_str_mv |
por |
language |
por |
dc.relation.confidence.fl_str_mv |
-1 -1 |
dc.relation.authority.fl_str_mv |
2e542afc-9fec-43b4-b11a-1eb2ed3a1f3d |
dc.rights.driver.fl_str_mv |
info:eu-repo/semantics/openAccess |
eu_rights_str_mv |
openAccess |
dc.format.none.fl_str_mv |
application/pdf |
dc.publisher.none.fl_str_mv |
Universidade Federal de São Carlos |
dc.publisher.program.fl_str_mv |
Programa de Pós-Graduação em Química - PPGQ |
dc.publisher.initials.fl_str_mv |
UFSCar |
dc.publisher.country.fl_str_mv |
BR |
publisher.none.fl_str_mv |
Universidade Federal de São Carlos |
dc.source.none.fl_str_mv |
reponame:Repositório Institucional da UFSCAR instname:Universidade Federal de São Carlos (UFSCAR) instacron:UFSCAR |
instname_str |
Universidade Federal de São Carlos (UFSCAR) |
instacron_str |
UFSCAR |
institution |
UFSCAR |
reponame_str |
Repositório Institucional da UFSCAR |
collection |
Repositório Institucional da UFSCAR |
bitstream.url.fl_str_mv |
https://repositorio.ufscar.br/bitstream/ufscar/6486/1/3516.pdf https://repositorio.ufscar.br/bitstream/ufscar/6486/2/3516.pdf.jpg |
bitstream.checksum.fl_str_mv |
4d0f2531bdae61efc9d1492d1c35c56c 55e00652e2b4ec18762efa951e711207 |
bitstream.checksumAlgorithm.fl_str_mv |
MD5 MD5 |
repository.name.fl_str_mv |
Repositório Institucional da UFSCAR - Universidade Federal de São Carlos (UFSCAR) |
repository.mail.fl_str_mv |
|
_version_ |
1802136295274708992 |