Study of the application of sunflower oil in the process of drilling ABNT 1045 steel
Autor(a) principal: | |
---|---|
Data de Publicação: | 2014 |
Outros Autores: | , , , , |
Tipo de documento: | Artigo |
Idioma: | eng |
Título da fonte: | Acta scientiarum. Technology (Online) |
Texto Completo: | http://www.periodicos.uem.br/ojs/index.php/ActaSciTechnol/article/view/19795 |
Resumo: | The cutting fluids in machining, when chosen and applied adequately can contemplate in benefits during the manufacturing processes. The selected method should allow the cutting fluid to reach the closest possible of the cutting edge lubricating the chip-tool interface. The properties of the fluid are fundamental so that the same facilitates the machining process. However the fluid can represent a great problem for the environment and health of the operator. For that reason, several scientific and technological studies are constantly developed to investigate the performance and alternative applications of cutting fluids in machining operations. This work studies the effect of sunflower oil in the cutting forces for the drilling process of 1045 ABNT steel. The fluid was applied in the form MQL - Minimum Quantity Lubrication for different cutting conditions. The cutting speed, feed rate and the length of the hole were varied. Each one of the cutting variables two levels were used. The results suggest a good acting sunflower oil in the work accomplished. |
id |
UEM-6_0ad9758a75ed5915c2fcc0420373e522 |
---|---|
oai_identifier_str |
oai:periodicos.uem.br/ojs:article/19795 |
network_acronym_str |
UEM-6 |
network_name_str |
Acta scientiarum. Technology (Online) |
repository_id_str |
|
spelling |
Study of the application of sunflower oil in the process of drilling ABNT 1045 steelcutting fluidsdrilling1045 ABNT SteelMQL technicalEngenharia MecânicaThe cutting fluids in machining, when chosen and applied adequately can contemplate in benefits during the manufacturing processes. The selected method should allow the cutting fluid to reach the closest possible of the cutting edge lubricating the chip-tool interface. The properties of the fluid are fundamental so that the same facilitates the machining process. However the fluid can represent a great problem for the environment and health of the operator. For that reason, several scientific and technological studies are constantly developed to investigate the performance and alternative applications of cutting fluids in machining operations. This work studies the effect of sunflower oil in the cutting forces for the drilling process of 1045 ABNT steel. The fluid was applied in the form MQL - Minimum Quantity Lubrication for different cutting conditions. The cutting speed, feed rate and the length of the hole were varied. Each one of the cutting variables two levels were used. The results suggest a good acting sunflower oil in the work accomplished. Universidade Estadual De Maringá2014-04-04info:eu-repo/semantics/articleinfo:eu-repo/semantics/publishedVersionUsinagemapplication/pdfhttp://www.periodicos.uem.br/ojs/index.php/ActaSciTechnol/article/view/1979510.4025/actascitechnol.v36i2.19795Acta Scientiarum. Technology; Vol 36 No 2 (2014); 257-262Acta Scientiarum. Technology; v. 36 n. 2 (2014); 257-2621806-25631807-8664reponame:Acta scientiarum. Technology (Online)instname:Universidade Estadual de Maringá (UEM)instacron:UEMenghttp://www.periodicos.uem.br/ojs/index.php/ActaSciTechnol/article/view/19795/12652Rodrigues, Jean Robert PereiraNeves, Tiago do Espírito Santo BaldezSilva, Marcio Bacci daMartins, Keyll Carlos RibeiroRibeiro, José Ribamar dos SantosCunha, Adilto Pereira Andradeinfo:eu-repo/semantics/openAccess2014-04-11T14:25:18Zoai:periodicos.uem.br/ojs:article/19795Revistahttps://www.periodicos.uem.br/ojs/index.php/ActaSciTechnol/indexPUBhttps://www.periodicos.uem.br/ojs/index.php/ActaSciTechnol/oai||actatech@uem.br1807-86641806-2563opendoar:2014-04-11T14:25:18Acta scientiarum. Technology (Online) - Universidade Estadual de Maringá (UEM)false |
dc.title.none.fl_str_mv |
Study of the application of sunflower oil in the process of drilling ABNT 1045 steel |
title |
Study of the application of sunflower oil in the process of drilling ABNT 1045 steel |
spellingShingle |
Study of the application of sunflower oil in the process of drilling ABNT 1045 steel Rodrigues, Jean Robert Pereira cutting fluids drilling 1045 ABNT Steel MQL technical Engenharia Mecânica |
title_short |
Study of the application of sunflower oil in the process of drilling ABNT 1045 steel |
title_full |
Study of the application of sunflower oil in the process of drilling ABNT 1045 steel |
title_fullStr |
Study of the application of sunflower oil in the process of drilling ABNT 1045 steel |
title_full_unstemmed |
Study of the application of sunflower oil in the process of drilling ABNT 1045 steel |
title_sort |
Study of the application of sunflower oil in the process of drilling ABNT 1045 steel |
author |
Rodrigues, Jean Robert Pereira |
author_facet |
Rodrigues, Jean Robert Pereira Neves, Tiago do Espírito Santo Baldez Silva, Marcio Bacci da Martins, Keyll Carlos Ribeiro Ribeiro, José Ribamar dos Santos Cunha, Adilto Pereira Andrade |
author_role |
author |
author2 |
Neves, Tiago do Espírito Santo Baldez Silva, Marcio Bacci da Martins, Keyll Carlos Ribeiro Ribeiro, José Ribamar dos Santos Cunha, Adilto Pereira Andrade |
author2_role |
author author author author author |
dc.contributor.author.fl_str_mv |
Rodrigues, Jean Robert Pereira Neves, Tiago do Espírito Santo Baldez Silva, Marcio Bacci da Martins, Keyll Carlos Ribeiro Ribeiro, José Ribamar dos Santos Cunha, Adilto Pereira Andrade |
dc.subject.por.fl_str_mv |
cutting fluids drilling 1045 ABNT Steel MQL technical Engenharia Mecânica |
topic |
cutting fluids drilling 1045 ABNT Steel MQL technical Engenharia Mecânica |
description |
The cutting fluids in machining, when chosen and applied adequately can contemplate in benefits during the manufacturing processes. The selected method should allow the cutting fluid to reach the closest possible of the cutting edge lubricating the chip-tool interface. The properties of the fluid are fundamental so that the same facilitates the machining process. However the fluid can represent a great problem for the environment and health of the operator. For that reason, several scientific and technological studies are constantly developed to investigate the performance and alternative applications of cutting fluids in machining operations. This work studies the effect of sunflower oil in the cutting forces for the drilling process of 1045 ABNT steel. The fluid was applied in the form MQL - Minimum Quantity Lubrication for different cutting conditions. The cutting speed, feed rate and the length of the hole were varied. Each one of the cutting variables two levels were used. The results suggest a good acting sunflower oil in the work accomplished. |
publishDate |
2014 |
dc.date.none.fl_str_mv |
2014-04-04 |
dc.type.driver.fl_str_mv |
info:eu-repo/semantics/article info:eu-repo/semantics/publishedVersion Usinagem |
format |
article |
status_str |
publishedVersion |
dc.identifier.uri.fl_str_mv |
http://www.periodicos.uem.br/ojs/index.php/ActaSciTechnol/article/view/19795 10.4025/actascitechnol.v36i2.19795 |
url |
http://www.periodicos.uem.br/ojs/index.php/ActaSciTechnol/article/view/19795 |
identifier_str_mv |
10.4025/actascitechnol.v36i2.19795 |
dc.language.iso.fl_str_mv |
eng |
language |
eng |
dc.relation.none.fl_str_mv |
http://www.periodicos.uem.br/ojs/index.php/ActaSciTechnol/article/view/19795/12652 |
dc.rights.driver.fl_str_mv |
info:eu-repo/semantics/openAccess |
eu_rights_str_mv |
openAccess |
dc.format.none.fl_str_mv |
application/pdf |
dc.publisher.none.fl_str_mv |
Universidade Estadual De Maringá |
publisher.none.fl_str_mv |
Universidade Estadual De Maringá |
dc.source.none.fl_str_mv |
Acta Scientiarum. Technology; Vol 36 No 2 (2014); 257-262 Acta Scientiarum. Technology; v. 36 n. 2 (2014); 257-262 1806-2563 1807-8664 reponame:Acta scientiarum. Technology (Online) instname:Universidade Estadual de Maringá (UEM) instacron:UEM |
instname_str |
Universidade Estadual de Maringá (UEM) |
instacron_str |
UEM |
institution |
UEM |
reponame_str |
Acta scientiarum. Technology (Online) |
collection |
Acta scientiarum. Technology (Online) |
repository.name.fl_str_mv |
Acta scientiarum. Technology (Online) - Universidade Estadual de Maringá (UEM) |
repository.mail.fl_str_mv |
||actatech@uem.br |
_version_ |
1799315335378108416 |