Avaliação numérico-experimental da distribuição de tensões geradas pela contração de polimerização de resinas compostas
Autor(a) principal: | |
---|---|
Data de Publicação: | 2010 |
Tipo de documento: | Dissertação |
Idioma: | por |
Título da fonte: | Biblioteca Digital de Teses e Dissertações da UEPG |
Texto Completo: | http://tede2.uepg.br/jspui/handle/prefix/1767 |
Resumo: | The purpose of this study was to evaluate the distribution of the stresses generated by the polymerization shrinkage of three composite resins [FiltekTM Z250 (3M ESPE, St. Paul, Minn., USA); FiltekTM Z350 (3M ESPE, St. Paul, Minn., USA) and P-90 (3M ESPE, St. Paul, Minn., USA)], with mechanical tests and finite element analysis (FEM). Ten samples of each composite resin were prepared in metal matrix of 25 X 2 X 2 mm and were tested in the flexural 3 points bend strength in a universal testing machine and a cross-head speed of 0.5 mm / min. After, more 10 samples of each composite resin were prepared in a metal matrix in the form of an hourglass measuring 10 x 3 x 1.5 mm with a central bottleneck of 1.5 mm were submitted to a tensile strength in an universal testing machine with a load cell of 10 N and a crosshead speed of 1.0 mm / min until material failure occurred. After, FEM analysis was made simulating the effects of a class V restoration. In the mechanical tests of tensile strength (MPa) and 3 points bend flexural strength (MPa) respectively, all composites obtained similar results, being to FiltekTM Z-250 (36.51 ± 8.14 and 158.51 ± 31.80), to FiltekTM Z-350 (34.43 ± 6.49 and 146.65 ± 18.83) and to FiltekTM P90 (37.35 ± 7.51 and 148.00 ± 26.24) with no statistical differences by Two-way ANOVA test andBonferroni (alpha = 0.05) post-hoc. In the FEM analysis, the silorane based resin (FiltekTM P90) showed lower values of tension produced by polymerization shrinkage and better able to dissipate it by the adjacent structures. |
id |
UEPG_088a54e0a70916bb8b0b31f0cd0d9d65 |
---|---|
oai_identifier_str |
oai:tede2.uepg.br:prefix/1767 |
network_acronym_str |
UEPG |
network_name_str |
Biblioteca Digital de Teses e Dissertações da UEPG |
repository_id_str |
|
spelling |
Gomes, Osnara Maria MongruelCPF:47308257991http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4773647J1Hecke, Mildred BallinCPF:35957433934http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4780229J0Calixto, Abraham LincolnCPF:09610436870http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4769030H2CPF:00129034002http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4138338T4Baggio, Rafael2017-07-24T19:22:13Z2010-11-052017-07-24T19:22:13Z2010-02-23BAGGIO, Rafael. Numerical-experimental evaluation of the distribution of the stresses produced by polymerization shrinkage of composite resins. 2010. 85 f. Dissertação (Mestrado em Clinica Integrada, Dentística Restauradora e Periodontia) - UNIVERSIDADE ESTADUAL DE PONTA GROSSA, Ponta Grossa, 2010.http://tede2.uepg.br/jspui/handle/prefix/1767The purpose of this study was to evaluate the distribution of the stresses generated by the polymerization shrinkage of three composite resins [FiltekTM Z250 (3M ESPE, St. Paul, Minn., USA); FiltekTM Z350 (3M ESPE, St. Paul, Minn., USA) and P-90 (3M ESPE, St. Paul, Minn., USA)], with mechanical tests and finite element analysis (FEM). Ten samples of each composite resin were prepared in metal matrix of 25 X 2 X 2 mm and were tested in the flexural 3 points bend strength in a universal testing machine and a cross-head speed of 0.5 mm / min. After, more 10 samples of each composite resin were prepared in a metal matrix in the form of an hourglass measuring 10 x 3 x 1.5 mm with a central bottleneck of 1.5 mm were submitted to a tensile strength in an universal testing machine with a load cell of 10 N and a crosshead speed of 1.0 mm / min until material failure occurred. After, FEM analysis was made simulating the effects of a class V restoration. In the mechanical tests of tensile strength (MPa) and 3 points bend flexural strength (MPa) respectively, all composites obtained similar results, being to FiltekTM Z-250 (36.51 ± 8.14 and 158.51 ± 31.80), to FiltekTM Z-350 (34.43 ± 6.49 and 146.65 ± 18.83) and to FiltekTM P90 (37.35 ± 7.51 and 148.00 ± 26.24) with no statistical differences by Two-way ANOVA test andBonferroni (alpha = 0.05) post-hoc. In the FEM analysis, the silorane based resin (FiltekTM P90) showed lower values of tension produced by polymerization shrinkage and better able to dissipate it by the adjacent structures.Este trabalho tem como objetivo avaliar a distribuição de tensões geradas pela contração de polimerização de 3 resinas compostas [FiltekTM Z-250 (3M ESPE, St. Paul, Minn., USA); FiltekTM Z-350 (3M ESPE, St. Paul, Minn., USA) e P90 (3M ESPE, St. Paul, Minn., USA)], através de testes mecânicos e análise por meio do método de elementos finitos. Inicialmente, 10 cp de cada resina composta foram confeccionados em matrizes metálicas de 25 X 2 X 2 mm e submetidos ao ensaio de resistência flexural de 3 pontos em uma Máquina de Ensaios Universal à uma velocidade de 0,5 mm/min. Para o teste de resistência à tração, foram confeccionados 10 cp para cada grupo de resina composta, mas agora em uma matriz metálica em forma de ampulheta medindo 10 x 3 x 1,5 mm com um estrangulamento central de 1,5 mm. Em seguida, as amostras foram submetidas ao teste de resistência à tração em uma Máquina de Ensaios Universal com uma célula de carga de 10 N a uma velocidade de 1,0 mm/min até que ocorreu a fratura no material. Com os dados obtidos em laboratório, uma simulação computacional foi realizada através do MEF, simulando os efeitos de uma restauração classe V na região cervical da face vestibular de um pré-molar. Nos testes mecânicos, após análise de variância ANOVA dois critério e pós-teste de Bonferroni com alfa igual a 0,05, não foram encontradas diferenças estatísticas para a resistência à tração (MPa) e resistência flexural (MPa) respectivamente entre as resinas FiltekTM Z-250 (36,51 ± 8,14 e 158,51 ± 31,80), FiltekTM Z-350 (34,43 ± 6,49 e 146,65 ± 18,83) e FiltekTM P90 (37,35 ± 7,51 e 148,00 ± 26,24). Na análise pelo método de elementos finitos, a resina à base de silorano (FiltekTM P90) obteve menores valores de tensões produzidas pela contração de polimerização e conseguiu uma melhor dissipação da mesma pelas estruturas adjacentes.Made available in DSpace on 2017-07-24T19:22:13Z (GMT). No. of bitstreams: 1 Rafael Baggio.pdf: 2179064 bytes, checksum: 054756974bbbe9db77284217ea63ed04 (MD5) Previous issue date: 2010-02-23Coordenação de Aperfeiçoamento de Pessoal de Nível Superiorapplication/pdfporUNIVERSIDADE ESTADUAL DE PONTA GROSSAPrograma de Pós-Graduação em OdontologiaUEPGBRClinica Integrada, Dentística Restauradora e Periodontiacontração de polimerizaçãoresinas compostasMEFpolymerization shrinkagecomposite resinFEMCNPQ::CIENCIAS DA SAUDE::ODONTOLOGIAAvaliação numérico-experimental da distribuição de tensões geradas pela contração de polimerização de resinas compostasNumerical-experimental evaluation of the distribution of the stresses produced by polymerization shrinkage of composite resinsinfo:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/masterThesisinfo:eu-repo/semantics/openAccessreponame:Biblioteca Digital de Teses e Dissertações da UEPGinstname:Universidade Estadual de Ponta Grossa (UEPG)instacron:UEPGORIGINALRafael Baggio.pdfapplication/pdf2179064http://tede2.uepg.br/jspui/bitstream/prefix/1767/1/Rafael%20Baggio.pdf054756974bbbe9db77284217ea63ed04MD51prefix/17672017-07-24 16:22:13.912oai:tede2.uepg.br:prefix/1767Biblioteca Digital de Teses e Dissertaçõeshttps://tede2.uepg.br/jspui/PUBhttp://tede2.uepg.br/oai/requestbicen@uepg.br||mv_fidelis@yahoo.com.bropendoar:2017-07-24T19:22:13Biblioteca Digital de Teses e Dissertações da UEPG - Universidade Estadual de Ponta Grossa (UEPG)false |
dc.title.por.fl_str_mv |
Avaliação numérico-experimental da distribuição de tensões geradas pela contração de polimerização de resinas compostas |
dc.title.alternative.eng.fl_str_mv |
Numerical-experimental evaluation of the distribution of the stresses produced by polymerization shrinkage of composite resins |
title |
Avaliação numérico-experimental da distribuição de tensões geradas pela contração de polimerização de resinas compostas |
spellingShingle |
Avaliação numérico-experimental da distribuição de tensões geradas pela contração de polimerização de resinas compostas Baggio, Rafael contração de polimerização resinas compostas MEF polymerization shrinkage composite resin FEM CNPQ::CIENCIAS DA SAUDE::ODONTOLOGIA |
title_short |
Avaliação numérico-experimental da distribuição de tensões geradas pela contração de polimerização de resinas compostas |
title_full |
Avaliação numérico-experimental da distribuição de tensões geradas pela contração de polimerização de resinas compostas |
title_fullStr |
Avaliação numérico-experimental da distribuição de tensões geradas pela contração de polimerização de resinas compostas |
title_full_unstemmed |
Avaliação numérico-experimental da distribuição de tensões geradas pela contração de polimerização de resinas compostas |
title_sort |
Avaliação numérico-experimental da distribuição de tensões geradas pela contração de polimerização de resinas compostas |
author |
Baggio, Rafael |
author_facet |
Baggio, Rafael |
author_role |
author |
dc.contributor.advisor1.fl_str_mv |
Gomes, Osnara Maria Mongruel |
dc.contributor.advisor1ID.fl_str_mv |
CPF:47308257991 |
dc.contributor.advisor1Lattes.fl_str_mv |
http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4773647J1 |
dc.contributor.referee1.fl_str_mv |
Hecke, Mildred Ballin |
dc.contributor.referee1ID.fl_str_mv |
CPF:35957433934 |
dc.contributor.referee1Lattes.fl_str_mv |
http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4780229J0 |
dc.contributor.referee2.fl_str_mv |
Calixto, Abraham Lincoln |
dc.contributor.referee2ID.fl_str_mv |
CPF:09610436870 |
dc.contributor.referee2Lattes.fl_str_mv |
http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4769030H2 |
dc.contributor.authorID.fl_str_mv |
CPF:00129034002 |
dc.contributor.authorLattes.fl_str_mv |
http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4138338T4 |
dc.contributor.author.fl_str_mv |
Baggio, Rafael |
contributor_str_mv |
Gomes, Osnara Maria Mongruel Hecke, Mildred Ballin Calixto, Abraham Lincoln |
dc.subject.por.fl_str_mv |
contração de polimerização resinas compostas MEF |
topic |
contração de polimerização resinas compostas MEF polymerization shrinkage composite resin FEM CNPQ::CIENCIAS DA SAUDE::ODONTOLOGIA |
dc.subject.eng.fl_str_mv |
polymerization shrinkage composite resin FEM |
dc.subject.cnpq.fl_str_mv |
CNPQ::CIENCIAS DA SAUDE::ODONTOLOGIA |
description |
The purpose of this study was to evaluate the distribution of the stresses generated by the polymerization shrinkage of three composite resins [FiltekTM Z250 (3M ESPE, St. Paul, Minn., USA); FiltekTM Z350 (3M ESPE, St. Paul, Minn., USA) and P-90 (3M ESPE, St. Paul, Minn., USA)], with mechanical tests and finite element analysis (FEM). Ten samples of each composite resin were prepared in metal matrix of 25 X 2 X 2 mm and were tested in the flexural 3 points bend strength in a universal testing machine and a cross-head speed of 0.5 mm / min. After, more 10 samples of each composite resin were prepared in a metal matrix in the form of an hourglass measuring 10 x 3 x 1.5 mm with a central bottleneck of 1.5 mm were submitted to a tensile strength in an universal testing machine with a load cell of 10 N and a crosshead speed of 1.0 mm / min until material failure occurred. After, FEM analysis was made simulating the effects of a class V restoration. In the mechanical tests of tensile strength (MPa) and 3 points bend flexural strength (MPa) respectively, all composites obtained similar results, being to FiltekTM Z-250 (36.51 ± 8.14 and 158.51 ± 31.80), to FiltekTM Z-350 (34.43 ± 6.49 and 146.65 ± 18.83) and to FiltekTM P90 (37.35 ± 7.51 and 148.00 ± 26.24) with no statistical differences by Two-way ANOVA test andBonferroni (alpha = 0.05) post-hoc. In the FEM analysis, the silorane based resin (FiltekTM P90) showed lower values of tension produced by polymerization shrinkage and better able to dissipate it by the adjacent structures. |
publishDate |
2010 |
dc.date.available.fl_str_mv |
2010-11-05 2017-07-24T19:22:13Z |
dc.date.issued.fl_str_mv |
2010-02-23 |
dc.date.accessioned.fl_str_mv |
2017-07-24T19:22:13Z |
dc.type.status.fl_str_mv |
info:eu-repo/semantics/publishedVersion |
dc.type.driver.fl_str_mv |
info:eu-repo/semantics/masterThesis |
format |
masterThesis |
status_str |
publishedVersion |
dc.identifier.citation.fl_str_mv |
BAGGIO, Rafael. Numerical-experimental evaluation of the distribution of the stresses produced by polymerization shrinkage of composite resins. 2010. 85 f. Dissertação (Mestrado em Clinica Integrada, Dentística Restauradora e Periodontia) - UNIVERSIDADE ESTADUAL DE PONTA GROSSA, Ponta Grossa, 2010. |
dc.identifier.uri.fl_str_mv |
http://tede2.uepg.br/jspui/handle/prefix/1767 |
identifier_str_mv |
BAGGIO, Rafael. Numerical-experimental evaluation of the distribution of the stresses produced by polymerization shrinkage of composite resins. 2010. 85 f. Dissertação (Mestrado em Clinica Integrada, Dentística Restauradora e Periodontia) - UNIVERSIDADE ESTADUAL DE PONTA GROSSA, Ponta Grossa, 2010. |
url |
http://tede2.uepg.br/jspui/handle/prefix/1767 |
dc.language.iso.fl_str_mv |
por |
language |
por |
dc.rights.driver.fl_str_mv |
info:eu-repo/semantics/openAccess |
eu_rights_str_mv |
openAccess |
dc.format.none.fl_str_mv |
application/pdf |
dc.publisher.none.fl_str_mv |
UNIVERSIDADE ESTADUAL DE PONTA GROSSA |
dc.publisher.program.fl_str_mv |
Programa de Pós-Graduação em Odontologia |
dc.publisher.initials.fl_str_mv |
UEPG |
dc.publisher.country.fl_str_mv |
BR |
dc.publisher.department.fl_str_mv |
Clinica Integrada, Dentística Restauradora e Periodontia |
publisher.none.fl_str_mv |
UNIVERSIDADE ESTADUAL DE PONTA GROSSA |
dc.source.none.fl_str_mv |
reponame:Biblioteca Digital de Teses e Dissertações da UEPG instname:Universidade Estadual de Ponta Grossa (UEPG) instacron:UEPG |
instname_str |
Universidade Estadual de Ponta Grossa (UEPG) |
instacron_str |
UEPG |
institution |
UEPG |
reponame_str |
Biblioteca Digital de Teses e Dissertações da UEPG |
collection |
Biblioteca Digital de Teses e Dissertações da UEPG |
bitstream.url.fl_str_mv |
http://tede2.uepg.br/jspui/bitstream/prefix/1767/1/Rafael%20Baggio.pdf |
bitstream.checksum.fl_str_mv |
054756974bbbe9db77284217ea63ed04 |
bitstream.checksumAlgorithm.fl_str_mv |
MD5 |
repository.name.fl_str_mv |
Biblioteca Digital de Teses e Dissertações da UEPG - Universidade Estadual de Ponta Grossa (UEPG) |
repository.mail.fl_str_mv |
bicen@uepg.br||mv_fidelis@yahoo.com.br |
_version_ |
1809460455928758272 |