Comportamento estrutural de ligações tubulares T e KT.
Autor(a) principal: | |
---|---|
Data de Publicação: | 2012 |
Tipo de documento: | Dissertação |
Idioma: | por |
Título da fonte: | Biblioteca Digital de Teses e Dissertações da UERJ |
Texto Completo: | http://www.bdtd.uerj.br/handle/1/11538 |
Resumo: | The hollow section seamless are widely used in many countries, however, in Brazil, the use of these section was rather limited, being restricted to just the spatial roof. The situation of the Brazilian market began to change due to the increased supply of these section provided by the start of production by V&M do BRASIL in 2000, thus before the novelty of the technology, imposes the need to disseminate and implement the use of section type, and an increased number of research studies to better understand its structural behavior. This study presents a parametric analysis of joints type "KT" and "T", by determining the ultimate strength of the joint obtained by the criterion of deformation limit proposed by several researchers, comparing the results with the requirements of Eurocode 3, Project Brazilian Standard and CIDECT Additionally we proceeded to compare the behavior of the global node number of a truss, with the numerical analysis of the behavior of the isolated node. The joint object of this study are composed of rectangular hollow section (RHS) in the chord and circular hollow section (CHS) on the brace member. The finite element models were developed in the program Ansys 12.0. The non-linearities physical and geometric have been incorporated in the models, to mobilize the full load capacity of the joint. It was concluded among other things for the node of the truss studied in this work, the maximum allowable loading project through the design standards is to promote security when compared with the criterion limit of deformation. |
id |
UERJ_6800967d020f8985376b463ff9bf0899 |
---|---|
oai_identifier_str |
oai:www.bdtd.uerj.br:1/11538 |
network_acronym_str |
UERJ |
network_name_str |
Biblioteca Digital de Teses e Dissertações da UERJ |
repository_id_str |
2903 |
spelling |
Lima, Luciano Rodrigues Ornelas dehttp://lattes.cnpq.br/2151919861612154Vellasco, Pedro Colmar Gonçalves da Silvahttp://lattes.cnpq.br/2438486171976888Silva, José Guilherme Santos dahttp://lattes.cnpq.br/4422797300106230Sarmanho, Arlene Maria Cunhahttp://lattes.cnpq.br/2282392116347497Soeiro, Francisco José da Cunha Pireshttp://lattes.cnpq.br/8690926504635230http://lattes.cnpq.br/2678410722644922Lima, Nívia dos Santos2021-01-06T19:01:08Z2012-10-312012-03-01LIMA, Nívia dos Santos. Comportamento estrutural de ligações tubulares T e KT.. 2012. 108 f. Dissertação (Mestrado em Estruturas; Geotecnia; Construção Civil) - Universidade do Estado do Rio de Janeiro, Rio de Janeiro, 2012.http://www.bdtd.uerj.br/handle/1/11538The hollow section seamless are widely used in many countries, however, in Brazil, the use of these section was rather limited, being restricted to just the spatial roof. The situation of the Brazilian market began to change due to the increased supply of these section provided by the start of production by V&M do BRASIL in 2000, thus before the novelty of the technology, imposes the need to disseminate and implement the use of section type, and an increased number of research studies to better understand its structural behavior. This study presents a parametric analysis of joints type "KT" and "T", by determining the ultimate strength of the joint obtained by the criterion of deformation limit proposed by several researchers, comparing the results with the requirements of Eurocode 3, Project Brazilian Standard and CIDECT Additionally we proceeded to compare the behavior of the global node number of a truss, with the numerical analysis of the behavior of the isolated node. The joint object of this study are composed of rectangular hollow section (RHS) in the chord and circular hollow section (CHS) on the brace member. The finite element models were developed in the program Ansys 12.0. The non-linearities physical and geometric have been incorporated in the models, to mobilize the full load capacity of the joint. It was concluded among other things for the node of the truss studied in this work, the maximum allowable loading project through the design standards is to promote security when compared with the criterion limit of deformation.Os perfis tubulares sem costura são largamente utilizados em diversos países, porém, no Brasil, o uso desses perfis era bastante limitado, restringindo-se praticamente a coberturas espaciais. A situação do mercado brasileiro começou a se alterar em razão da maior oferta desses perfis proporcionada pelo início da produção pela V&M do BRASIL no ano de 2000, sendo assim diante da novidade da tecnologia, impõe-se a necessidade de divulgação e implementação do uso desse tipo de perfil, além de uma ampliação do número de trabalhos de pesquisa para melhor compreensão de seu comportamento estrutural. O presente trabalho apresenta uma análise paramétrica de ligações tipo KT e T , através da determinação da resistência última da ligação obtida pelo critério de deformação limite proposto por diversos pesquisadores, comparando os resultados com as prescrições do Eurocode 3, do Projeto de Norma Brasileira e do CIDECT. Adicionalmente procedeu-se na comparação do comportamento numérico global do nó de uma treliça, com a análise do comportamento numérico do nó isolado. As ligações objeto deste estudo são compostas por perfil tubular retangular (RHS) no banzo e perfis circulares (CHS) nas diagonais e montantes. Os modelos em elementos finitos, foram desenvolvidos no programa Ansys 12.0, as não-linearidades físicas e geométricas foram incorporadas aos modelos, a fim de se mobilizar totalmente a capacidade resistente da ligação. Concluiu-se entre outras coisas que. para o nó da treliça em estudo neste trabalho, o carregamento de projeto máximo permitido através do dimensionamento pelas normas fica a favor da segurança quando comparado com o critério de deformação limite.Submitted by Boris Flegr (boris@uerj.br) on 2021-01-06T19:01:08Z No. of bitstreams: 1 Nivia dos Santos Lima.pdf: 3393555 bytes, checksum: ec5159b41e7e13c0ceba70fb17502d91 (MD5)Made available in DSpace on 2021-01-06T19:01:08Z (GMT). No. of bitstreams: 1 Nivia dos Santos Lima.pdf: 3393555 bytes, checksum: ec5159b41e7e13c0ceba70fb17502d91 (MD5) Previous issue date: 2012-03-01Coordenação de Aperfeiçoamento de Pessoal de Nível Superiorapplication/pdfporUniversidade do Estado do Rio de JaneiroPrograma de Pós-Graduação em Engenharia CivilUERJBRCentro de Tecnologia e Ciências::Faculdade de EngenhariaMetal structuresTubular jointsNumerical analysisFinite element methodNonlinear analysisEstruturas metálicasLigações tubularesAnálise numéricaMétodo dos elementos finitosAnálise não linearCNPQ::ENGENHARIAS::ENGENHARIA CIVILComportamento estrutural de ligações tubulares T e KT.Comportamento estrutural de ligações tubulares do tipo T e KT behavior of structural hollow section joints type "T" and "KT".info:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/masterThesisinfo:eu-repo/semantics/openAccessreponame:Biblioteca Digital de Teses e Dissertações da UERJinstname:Universidade do Estado do Rio de Janeiro (UERJ)instacron:UERJORIGINALNivia dos Santos Lima.pdfapplication/pdf3393555http://www.bdtd.uerj.br/bitstream/1/11538/1/Nivia+dos+Santos+Lima.pdfec5159b41e7e13c0ceba70fb17502d91MD511/115382024-02-27 14:52:27.74oai:www.bdtd.uerj.br:1/11538Biblioteca Digital de Teses e Dissertaçõeshttp://www.bdtd.uerj.br/PUBhttps://www.bdtd.uerj.br:8443/oai/requestbdtd.suporte@uerj.bropendoar:29032024-02-27T17:52:27Biblioteca Digital de Teses e Dissertações da UERJ - Universidade do Estado do Rio de Janeiro (UERJ)false |
dc.title.por.fl_str_mv |
Comportamento estrutural de ligações tubulares T e KT. |
dc.title.alternative.eng.fl_str_mv |
Comportamento estrutural de ligações tubulares do tipo T e KT behavior of structural hollow section joints type "T" and "KT". |
title |
Comportamento estrutural de ligações tubulares T e KT. |
spellingShingle |
Comportamento estrutural de ligações tubulares T e KT. Lima, Nívia dos Santos Metal structures Tubular joints Numerical analysis Finite element method Nonlinear analysis Estruturas metálicas Ligações tubulares Análise numérica Método dos elementos finitos Análise não linear CNPQ::ENGENHARIAS::ENGENHARIA CIVIL |
title_short |
Comportamento estrutural de ligações tubulares T e KT. |
title_full |
Comportamento estrutural de ligações tubulares T e KT. |
title_fullStr |
Comportamento estrutural de ligações tubulares T e KT. |
title_full_unstemmed |
Comportamento estrutural de ligações tubulares T e KT. |
title_sort |
Comportamento estrutural de ligações tubulares T e KT. |
author |
Lima, Nívia dos Santos |
author_facet |
Lima, Nívia dos Santos |
author_role |
author |
dc.contributor.advisor1.fl_str_mv |
Lima, Luciano Rodrigues Ornelas de |
dc.contributor.advisor1Lattes.fl_str_mv |
http://lattes.cnpq.br/2151919861612154 |
dc.contributor.advisor-co1.fl_str_mv |
Vellasco, Pedro Colmar Gonçalves da Silva |
dc.contributor.advisor-co1Lattes.fl_str_mv |
http://lattes.cnpq.br/2438486171976888 |
dc.contributor.advisor-co2.fl_str_mv |
Silva, José Guilherme Santos da |
dc.contributor.advisor-co2Lattes.fl_str_mv |
http://lattes.cnpq.br/4422797300106230 |
dc.contributor.referee1.fl_str_mv |
Sarmanho, Arlene Maria Cunha |
dc.contributor.referee1Lattes.fl_str_mv |
http://lattes.cnpq.br/2282392116347497 |
dc.contributor.referee2.fl_str_mv |
Soeiro, Francisco José da Cunha Pires |
dc.contributor.referee2Lattes.fl_str_mv |
http://lattes.cnpq.br/8690926504635230 |
dc.contributor.authorLattes.fl_str_mv |
http://lattes.cnpq.br/2678410722644922 |
dc.contributor.author.fl_str_mv |
Lima, Nívia dos Santos |
contributor_str_mv |
Lima, Luciano Rodrigues Ornelas de Vellasco, Pedro Colmar Gonçalves da Silva Silva, José Guilherme Santos da Sarmanho, Arlene Maria Cunha Soeiro, Francisco José da Cunha Pires |
dc.subject.eng.fl_str_mv |
Metal structures Tubular joints Numerical analysis Finite element method Nonlinear analysis |
topic |
Metal structures Tubular joints Numerical analysis Finite element method Nonlinear analysis Estruturas metálicas Ligações tubulares Análise numérica Método dos elementos finitos Análise não linear CNPQ::ENGENHARIAS::ENGENHARIA CIVIL |
dc.subject.por.fl_str_mv |
Estruturas metálicas Ligações tubulares Análise numérica Método dos elementos finitos Análise não linear |
dc.subject.cnpq.fl_str_mv |
CNPQ::ENGENHARIAS::ENGENHARIA CIVIL |
description |
The hollow section seamless are widely used in many countries, however, in Brazil, the use of these section was rather limited, being restricted to just the spatial roof. The situation of the Brazilian market began to change due to the increased supply of these section provided by the start of production by V&M do BRASIL in 2000, thus before the novelty of the technology, imposes the need to disseminate and implement the use of section type, and an increased number of research studies to better understand its structural behavior. This study presents a parametric analysis of joints type "KT" and "T", by determining the ultimate strength of the joint obtained by the criterion of deformation limit proposed by several researchers, comparing the results with the requirements of Eurocode 3, Project Brazilian Standard and CIDECT Additionally we proceeded to compare the behavior of the global node number of a truss, with the numerical analysis of the behavior of the isolated node. The joint object of this study are composed of rectangular hollow section (RHS) in the chord and circular hollow section (CHS) on the brace member. The finite element models were developed in the program Ansys 12.0. The non-linearities physical and geometric have been incorporated in the models, to mobilize the full load capacity of the joint. It was concluded among other things for the node of the truss studied in this work, the maximum allowable loading project through the design standards is to promote security when compared with the criterion limit of deformation. |
publishDate |
2012 |
dc.date.available.fl_str_mv |
2012-10-31 |
dc.date.issued.fl_str_mv |
2012-03-01 |
dc.date.accessioned.fl_str_mv |
2021-01-06T19:01:08Z |
dc.type.status.fl_str_mv |
info:eu-repo/semantics/publishedVersion |
dc.type.driver.fl_str_mv |
info:eu-repo/semantics/masterThesis |
format |
masterThesis |
status_str |
publishedVersion |
dc.identifier.citation.fl_str_mv |
LIMA, Nívia dos Santos. Comportamento estrutural de ligações tubulares T e KT.. 2012. 108 f. Dissertação (Mestrado em Estruturas; Geotecnia; Construção Civil) - Universidade do Estado do Rio de Janeiro, Rio de Janeiro, 2012. |
dc.identifier.uri.fl_str_mv |
http://www.bdtd.uerj.br/handle/1/11538 |
identifier_str_mv |
LIMA, Nívia dos Santos. Comportamento estrutural de ligações tubulares T e KT.. 2012. 108 f. Dissertação (Mestrado em Estruturas; Geotecnia; Construção Civil) - Universidade do Estado do Rio de Janeiro, Rio de Janeiro, 2012. |
url |
http://www.bdtd.uerj.br/handle/1/11538 |
dc.language.iso.fl_str_mv |
por |
language |
por |
dc.rights.driver.fl_str_mv |
info:eu-repo/semantics/openAccess |
eu_rights_str_mv |
openAccess |
dc.format.none.fl_str_mv |
application/pdf |
dc.publisher.none.fl_str_mv |
Universidade do Estado do Rio de Janeiro |
dc.publisher.program.fl_str_mv |
Programa de Pós-Graduação em Engenharia Civil |
dc.publisher.initials.fl_str_mv |
UERJ |
dc.publisher.country.fl_str_mv |
BR |
dc.publisher.department.fl_str_mv |
Centro de Tecnologia e Ciências::Faculdade de Engenharia |
publisher.none.fl_str_mv |
Universidade do Estado do Rio de Janeiro |
dc.source.none.fl_str_mv |
reponame:Biblioteca Digital de Teses e Dissertações da UERJ instname:Universidade do Estado do Rio de Janeiro (UERJ) instacron:UERJ |
instname_str |
Universidade do Estado do Rio de Janeiro (UERJ) |
instacron_str |
UERJ |
institution |
UERJ |
reponame_str |
Biblioteca Digital de Teses e Dissertações da UERJ |
collection |
Biblioteca Digital de Teses e Dissertações da UERJ |
bitstream.url.fl_str_mv |
http://www.bdtd.uerj.br/bitstream/1/11538/1/Nivia+dos+Santos+Lima.pdf |
bitstream.checksum.fl_str_mv |
ec5159b41e7e13c0ceba70fb17502d91 |
bitstream.checksumAlgorithm.fl_str_mv |
MD5 |
repository.name.fl_str_mv |
Biblioteca Digital de Teses e Dissertações da UERJ - Universidade do Estado do Rio de Janeiro (UERJ) |
repository.mail.fl_str_mv |
bdtd.suporte@uerj.br |
_version_ |
1811728659411632128 |