Avaliação de ligações K e T entre perfis estruturais tubulares circulares.
Autor(a) principal: | |
---|---|
Data de Publicação: | 2012 |
Tipo de documento: | Dissertação |
Idioma: | por |
Título da fonte: | Biblioteca Digital de Teses e Dissertações da UERJ |
Texto Completo: | http://www.bdtd.uerj.br/handle/1/11549 |
Resumo: | The widespread adoption of hollow section structures, mainly due to the advantages associated with the structural and aesthetic behavior, led to an intense use in the countries of Europe, Southeast Asia, North America and Australia. Countries like Canada, England, Germany and Holland use these structures intensively and have a current industrialized production with an associated high level of technological development. Increasing the supply of such profiles, combined with recent investigations in this area, leads the Brazil to enter in this world stage. However, the Brazilian standards that governing the design of these profiles are not yet updated, especially the tubular joints design. Given this perspective, this work presents an analysis of connections such as "K" and " T" with circular hollow sections. A comparison between the analytical design formulations proposed by Eurocode 3 Part 1.8, 2nd edition of the guide design of tubular joints of the CIDECT, Brazilian standard PN 02.125.03-004 and limit deformation criteria was performed. For each of the joints types analyzed, a finite element model was developed in ANSYS program, later to be calibrated and validated with experimental and numerical results present in literature. The models physical and geometrical non-linearities have been incorporated in the model to mobilize the joint full load capacity. The material nonlinearity was considered by Von Mises criteria through stress versus strain bilinear constitutive law. The geometric non-linearity was introduced in the model by Lagrange Updated Formulation considering the expected large deformation to allow redistribution of load in the joint after the initial yielding. This work also proposes the modeling of a planar truss made of circular hollow section structures to establish a comparison between a single joint and the response of joint as a part of a full scale truss structure. |
id |
UERJ_be0321cbe3ee8b1b2b0dd4738d7dfbbc |
---|---|
oai_identifier_str |
oai:www.bdtd.uerj.br:1/11549 |
network_acronym_str |
UERJ |
network_name_str |
Biblioteca Digital de Teses e Dissertações da UERJ |
repository_id_str |
2903 |
spelling |
Lima, Luciano Rodrigues Ornelas dehttp://lattes.cnpq.br/2151919861612154Vellasco, Pedro Colmar Gonçalves da Silvahttp://lattes.cnpq.br/2438486171976888Silva, José Guilherme Santos dahttp://lattes.cnpq.br/4422797300106230Sarmanho, Arlene Maria Cunhahttp://lattes.cnpq.br/2282392116347497http://lattes.cnpq.br/0026264268775324Silva, Raphael Santos da2021-01-06T19:01:22Z2013-07-172012-08-15SILVA, Raphael Santos da. Avaliação de ligações K e T entre perfis estruturais tubulares circulares.. 2012. 165 f. Dissertação (Mestrado em Estruturas; Geotecnia; Construção Civil) - Universidade do Estado do Rio de Janeiro, Rio de Janeiro, 2012.http://www.bdtd.uerj.br/handle/1/11549The widespread adoption of hollow section structures, mainly due to the advantages associated with the structural and aesthetic behavior, led to an intense use in the countries of Europe, Southeast Asia, North America and Australia. Countries like Canada, England, Germany and Holland use these structures intensively and have a current industrialized production with an associated high level of technological development. Increasing the supply of such profiles, combined with recent investigations in this area, leads the Brazil to enter in this world stage. However, the Brazilian standards that governing the design of these profiles are not yet updated, especially the tubular joints design. Given this perspective, this work presents an analysis of connections such as "K" and " T" with circular hollow sections. A comparison between the analytical design formulations proposed by Eurocode 3 Part 1.8, 2nd edition of the guide design of tubular joints of the CIDECT, Brazilian standard PN 02.125.03-004 and limit deformation criteria was performed. For each of the joints types analyzed, a finite element model was developed in ANSYS program, later to be calibrated and validated with experimental and numerical results present in literature. The models physical and geometrical non-linearities have been incorporated in the model to mobilize the joint full load capacity. The material nonlinearity was considered by Von Mises criteria through stress versus strain bilinear constitutive law. The geometric non-linearity was introduced in the model by Lagrange Updated Formulation considering the expected large deformation to allow redistribution of load in the joint after the initial yielding. This work also proposes the modeling of a planar truss made of circular hollow section structures to establish a comparison between a single joint and the response of joint as a part of a full scale truss structure.O difundido uso de perfis estruturais tubulares, principalmente devido às vantagens associadas ao comportamento estrutural e estético, levou a uma intensa utilização nos países da Europa, Sudeste Asiático, América do Norte e na Austrália. Países como Canadá, Inglaterra, Alemanha e Holanda fazem uso intensivo dessas estruturas e contam com uma produção corrente, industrializada e contínua com alto grau de desenvolvimento tecnológico. O aumento da oferta deste tipo de perfis, aliado a recentes pesquisas nesta área, leva o Brasil a se inserir neste cenário mundial. Entretanto, as normas brasileiras que regem o dimensionamento destes perfis ainda não se encontram atualizadas, principalmente no que tange ao dimensionamento de ligações de perfis tubulares. Considerando esta perspectiva, este trabalho apresenta uma análise de ligações tipo K e T com perfis tubulares circulares (CHS). Propõe-se estabelecer um quadro comparativo entre as formulações analíticas de dimensionamento proposta pelo Eurocode 3 Parte 1.8, 2ª edição do guia de projeto de ligações tubulares do CIDECT, projeto de norma brasileira PN 02.125.03-004 e critérios de deformação limite. Para cada um dos tipos de ligações analisadas, desenvolveu-se um modelo em elementos finitos no programa Ansys, calibrado e validado com resultados experimentais e numéricos existentes na literatura. As não-linearidades física e geométrica foram incorporadas aos modelos, a fim de se mobilizar totalmente a capacidade resistente da ligação. A não-linearidade do material foi considerada através do critério de plastificação de Von Mises através de uma lei constitutiva tensão versus deformação bilinear. A não-linearidade geométrica foi introduzida no modelo através da Formulação de Lagrange Atualizado considerando-se a previsão de grandes deformações de forma a permitir a redistribuição de carregamento na ligação após o escoamento inicial. Esta dissertação propõe ainda, a modelagem de uma treliça planar constituída de perfis tubulares, objetivando estabelecer uma comparação entre um nó isolado e um nó da treliça planar.Submitted by Boris Flegr (boris@uerj.br) on 2021-01-06T19:01:22Z No. of bitstreams: 2 Raphael Santos da Silva Pt 1.pdf: 3929574 bytes, checksum: 57f3549e7844af71e9a07d38bdaf1936 (MD5) Raphael Santos da Silva Pt 2.pdf: 3678547 bytes, checksum: eba893b4f133537c83a7d1bfdf4fb295 (MD5)Made available in DSpace on 2021-01-06T19:01:22Z (GMT). No. of bitstreams: 2 Raphael Santos da Silva Pt 1.pdf: 3929574 bytes, checksum: 57f3549e7844af71e9a07d38bdaf1936 (MD5) Raphael Santos da Silva Pt 2.pdf: 3678547 bytes, checksum: eba893b4f133537c83a7d1bfdf4fb295 (MD5) Previous issue date: 2012-08-15Coordenação de Aperfeiçoamento de Pessoal de Nível Superiorapplication/pdfporUniversidade do Estado do Rio de JaneiroPrograma de Pós-Graduação em Engenharia CivilUERJBRCentro de Tecnologia e Ciências::Faculdade de EngenhariaHollow section jointsNumerical analysisFinite element methodNonlinear analysisLigações tubularesAnálise numéricaMétodo dos elementos finitosAnálise não linearAço tubular - estruturasMétodo dos elementos finitosCNPQ::ENGENHARIAS::ENGENHARIA CIVILAvaliação de ligações K e T entre perfis estruturais tubulares circulares.Evaluation of K and T joints between circular tubular structural profiles.info:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/masterThesisinfo:eu-repo/semantics/openAccessreponame:Biblioteca Digital de Teses e Dissertações da UERJinstname:Universidade do Estado do Rio de Janeiro (UERJ)instacron:UERJORIGINALRaphael Santos da Silva Pt 1.pdfapplication/pdf3929574http://www.bdtd.uerj.br/bitstream/1/11549/1/Raphael+Santos+da+Silva+Pt+1.pdf57f3549e7844af71e9a07d38bdaf1936MD51Raphael Santos da Silva Pt 2.pdfapplication/pdf3678547http://www.bdtd.uerj.br/bitstream/1/11549/2/Raphael+Santos+da+Silva+Pt+2.pdfeba893b4f133537c83a7d1bfdf4fb295MD521/115492024-02-27 14:52:30.248oai:www.bdtd.uerj.br:1/11549Biblioteca Digital de Teses e Dissertaçõeshttp://www.bdtd.uerj.br/PUBhttps://www.bdtd.uerj.br:8443/oai/requestbdtd.suporte@uerj.bropendoar:29032024-02-27T17:52:30Biblioteca Digital de Teses e Dissertações da UERJ - Universidade do Estado do Rio de Janeiro (UERJ)false |
dc.title.por.fl_str_mv |
Avaliação de ligações K e T entre perfis estruturais tubulares circulares. |
dc.title.alternative.eng.fl_str_mv |
Evaluation of K and T joints between circular tubular structural profiles. |
title |
Avaliação de ligações K e T entre perfis estruturais tubulares circulares. |
spellingShingle |
Avaliação de ligações K e T entre perfis estruturais tubulares circulares. Silva, Raphael Santos da Hollow section joints Numerical analysis Finite element method Nonlinear analysis Ligações tubulares Análise numérica Método dos elementos finitos Análise não linear Aço tubular - estruturas Método dos elementos finitos CNPQ::ENGENHARIAS::ENGENHARIA CIVIL |
title_short |
Avaliação de ligações K e T entre perfis estruturais tubulares circulares. |
title_full |
Avaliação de ligações K e T entre perfis estruturais tubulares circulares. |
title_fullStr |
Avaliação de ligações K e T entre perfis estruturais tubulares circulares. |
title_full_unstemmed |
Avaliação de ligações K e T entre perfis estruturais tubulares circulares. |
title_sort |
Avaliação de ligações K e T entre perfis estruturais tubulares circulares. |
author |
Silva, Raphael Santos da |
author_facet |
Silva, Raphael Santos da |
author_role |
author |
dc.contributor.advisor1.fl_str_mv |
Lima, Luciano Rodrigues Ornelas de |
dc.contributor.advisor1Lattes.fl_str_mv |
http://lattes.cnpq.br/2151919861612154 |
dc.contributor.advisor-co1.fl_str_mv |
Vellasco, Pedro Colmar Gonçalves da Silva |
dc.contributor.advisor-co1Lattes.fl_str_mv |
http://lattes.cnpq.br/2438486171976888 |
dc.contributor.referee1.fl_str_mv |
Silva, José Guilherme Santos da |
dc.contributor.referee1Lattes.fl_str_mv |
http://lattes.cnpq.br/4422797300106230 |
dc.contributor.referee2.fl_str_mv |
Sarmanho, Arlene Maria Cunha |
dc.contributor.referee2Lattes.fl_str_mv |
http://lattes.cnpq.br/2282392116347497 |
dc.contributor.authorLattes.fl_str_mv |
http://lattes.cnpq.br/0026264268775324 |
dc.contributor.author.fl_str_mv |
Silva, Raphael Santos da |
contributor_str_mv |
Lima, Luciano Rodrigues Ornelas de Vellasco, Pedro Colmar Gonçalves da Silva Silva, José Guilherme Santos da Sarmanho, Arlene Maria Cunha |
dc.subject.eng.fl_str_mv |
Hollow section joints Numerical analysis Finite element method Nonlinear analysis |
topic |
Hollow section joints Numerical analysis Finite element method Nonlinear analysis Ligações tubulares Análise numérica Método dos elementos finitos Análise não linear Aço tubular - estruturas Método dos elementos finitos CNPQ::ENGENHARIAS::ENGENHARIA CIVIL |
dc.subject.por.fl_str_mv |
Ligações tubulares Análise numérica Método dos elementos finitos Análise não linear Aço tubular - estruturas Método dos elementos finitos |
dc.subject.cnpq.fl_str_mv |
CNPQ::ENGENHARIAS::ENGENHARIA CIVIL |
description |
The widespread adoption of hollow section structures, mainly due to the advantages associated with the structural and aesthetic behavior, led to an intense use in the countries of Europe, Southeast Asia, North America and Australia. Countries like Canada, England, Germany and Holland use these structures intensively and have a current industrialized production with an associated high level of technological development. Increasing the supply of such profiles, combined with recent investigations in this area, leads the Brazil to enter in this world stage. However, the Brazilian standards that governing the design of these profiles are not yet updated, especially the tubular joints design. Given this perspective, this work presents an analysis of connections such as "K" and " T" with circular hollow sections. A comparison between the analytical design formulations proposed by Eurocode 3 Part 1.8, 2nd edition of the guide design of tubular joints of the CIDECT, Brazilian standard PN 02.125.03-004 and limit deformation criteria was performed. For each of the joints types analyzed, a finite element model was developed in ANSYS program, later to be calibrated and validated with experimental and numerical results present in literature. The models physical and geometrical non-linearities have been incorporated in the model to mobilize the joint full load capacity. The material nonlinearity was considered by Von Mises criteria through stress versus strain bilinear constitutive law. The geometric non-linearity was introduced in the model by Lagrange Updated Formulation considering the expected large deformation to allow redistribution of load in the joint after the initial yielding. This work also proposes the modeling of a planar truss made of circular hollow section structures to establish a comparison between a single joint and the response of joint as a part of a full scale truss structure. |
publishDate |
2012 |
dc.date.issued.fl_str_mv |
2012-08-15 |
dc.date.available.fl_str_mv |
2013-07-17 |
dc.date.accessioned.fl_str_mv |
2021-01-06T19:01:22Z |
dc.type.status.fl_str_mv |
info:eu-repo/semantics/publishedVersion |
dc.type.driver.fl_str_mv |
info:eu-repo/semantics/masterThesis |
format |
masterThesis |
status_str |
publishedVersion |
dc.identifier.citation.fl_str_mv |
SILVA, Raphael Santos da. Avaliação de ligações K e T entre perfis estruturais tubulares circulares.. 2012. 165 f. Dissertação (Mestrado em Estruturas; Geotecnia; Construção Civil) - Universidade do Estado do Rio de Janeiro, Rio de Janeiro, 2012. |
dc.identifier.uri.fl_str_mv |
http://www.bdtd.uerj.br/handle/1/11549 |
identifier_str_mv |
SILVA, Raphael Santos da. Avaliação de ligações K e T entre perfis estruturais tubulares circulares.. 2012. 165 f. Dissertação (Mestrado em Estruturas; Geotecnia; Construção Civil) - Universidade do Estado do Rio de Janeiro, Rio de Janeiro, 2012. |
url |
http://www.bdtd.uerj.br/handle/1/11549 |
dc.language.iso.fl_str_mv |
por |
language |
por |
dc.rights.driver.fl_str_mv |
info:eu-repo/semantics/openAccess |
eu_rights_str_mv |
openAccess |
dc.format.none.fl_str_mv |
application/pdf |
dc.publisher.none.fl_str_mv |
Universidade do Estado do Rio de Janeiro |
dc.publisher.program.fl_str_mv |
Programa de Pós-Graduação em Engenharia Civil |
dc.publisher.initials.fl_str_mv |
UERJ |
dc.publisher.country.fl_str_mv |
BR |
dc.publisher.department.fl_str_mv |
Centro de Tecnologia e Ciências::Faculdade de Engenharia |
publisher.none.fl_str_mv |
Universidade do Estado do Rio de Janeiro |
dc.source.none.fl_str_mv |
reponame:Biblioteca Digital de Teses e Dissertações da UERJ instname:Universidade do Estado do Rio de Janeiro (UERJ) instacron:UERJ |
instname_str |
Universidade do Estado do Rio de Janeiro (UERJ) |
instacron_str |
UERJ |
institution |
UERJ |
reponame_str |
Biblioteca Digital de Teses e Dissertações da UERJ |
collection |
Biblioteca Digital de Teses e Dissertações da UERJ |
bitstream.url.fl_str_mv |
http://www.bdtd.uerj.br/bitstream/1/11549/1/Raphael+Santos+da+Silva+Pt+1.pdf http://www.bdtd.uerj.br/bitstream/1/11549/2/Raphael+Santos+da+Silva+Pt+2.pdf |
bitstream.checksum.fl_str_mv |
57f3549e7844af71e9a07d38bdaf1936 eba893b4f133537c83a7d1bfdf4fb295 |
bitstream.checksumAlgorithm.fl_str_mv |
MD5 MD5 |
repository.name.fl_str_mv |
Biblioteca Digital de Teses e Dissertações da UERJ - Universidade do Estado do Rio de Janeiro (UERJ) |
repository.mail.fl_str_mv |
bdtd.suporte@uerj.br |
_version_ |
1811728659446235136 |