Detalhamento de paredes de reservatórios de concreto armado usando a ferramenta Dynamo
Autor(a) principal: | |
---|---|
Data de Publicação: | 2023 |
Tipo de documento: | Trabalho de conclusão de curso |
Idioma: | por |
Título da fonte: | Repositório Institucional da UFAM |
Texto Completo: | http://riu.ufam.edu.br/handle/prefix/6968 |
Resumo: | This present assignment aims to show a routine for the creation, distribution and automatic implementation of flexural reinforcement in reinforced concrete tank walls, through visual programming. Being a worldwide known software, especially with regard to the application of BIM methodology, Revit does not have specific resources for structural design, and is a type of program that does not include automatic checks against the guidelines established in Brazilian standards. Its way of implementing the reinforcement is done by prismatic element, being necessary to perform cuts in a geometric model to insert reinforcement "manually", or in three- dimensional view, and only then detail them, according to a previously performed design. The development of this type of project involves repetitive actions that can be made easier with the creation of automatic calculation routines. With the intention of facilitating and reducing these detailing processes, a visual programming routine was created in the Dynamo environment, responsible for automating the implementation of reinforcement in the model of reinforced concrete tank structures. The results indicate that, through computational routines, it may be possible to increase the efficiency of Revit software and integrate knowledge of programming and structural design, thus providing the market with greater efficiency and technology for the various stages that involve the detailing of projects. |
id |
UFAM-1_43a97276be61df797e601f42581c34ee |
---|---|
oai_identifier_str |
oai:localhost:prefix/6968 |
network_acronym_str |
UFAM-1 |
network_name_str |
Repositório Institucional da UFAM |
repository_id_str |
|
spelling |
Detalhamento de paredes de reservatórios de concreto armado usando a ferramenta DynamoRevitDynamoReservatórios de concreto armadoDetalhamento de armadurasENGENHARIAS: ENGENHARIA CIVIL: ESTRUTURAS: ESTRUTURAS DE CONCRETOModelagem de informação da construçãoConstrução de concreto armadoProjeto estruturalThis present assignment aims to show a routine for the creation, distribution and automatic implementation of flexural reinforcement in reinforced concrete tank walls, through visual programming. Being a worldwide known software, especially with regard to the application of BIM methodology, Revit does not have specific resources for structural design, and is a type of program that does not include automatic checks against the guidelines established in Brazilian standards. Its way of implementing the reinforcement is done by prismatic element, being necessary to perform cuts in a geometric model to insert reinforcement "manually", or in three- dimensional view, and only then detail them, according to a previously performed design. The development of this type of project involves repetitive actions that can be made easier with the creation of automatic calculation routines. With the intention of facilitating and reducing these detailing processes, a visual programming routine was created in the Dynamo environment, responsible for automating the implementation of reinforcement in the model of reinforced concrete tank structures. The results indicate that, through computational routines, it may be possible to increase the efficiency of Revit software and integrate knowledge of programming and structural design, thus providing the market with greater efficiency and technology for the various stages that involve the detailing of projects.O presente trabalho visa apresentar uma rotina para a criação, distribuição e implementação automática das armaduras de flexão em paredes de reservatório de concreto armado, por meio de programação visual. Sendo um software mundialmente conhecido, especialmente no que se refere a aplicação da metodologia BIM, o programa Revit não dispõe de recursos específicos para o dimensionamento estrutural, e é um tipo de programa que não inclui verificações automáticas em relação às diretrizes estabelecidas nas normativas brasileiras. A sua forma de implementação das armaduras é feita por elemento prismático, sendo necessário realizar cortes em um modelo geométrico para inserir armaduras “manualmente”, ou em vista tridimensionais, e somente então detalhá-las, conforme um dimensionamento realizado previamente. Percebe-se que o desenvolvimento desse tipo de projeto envolve ações repetitivas e que podem ser facilitadas com a criação de rotinas de cálculo automático. Com o intuito de facilitar e reduzir esses processos de detalhamento, foi criado no presente trabalho uma rotina em programação visual no ambiente Dynamo, responsável pela automatização da implementação das armaduras no modelo de estruturas de reservatórios de concreto armado. Os resultados indicam que, por meio de rotinas computacionais, pode ser possível aumentar a eficiência do software Revit e integrar conhecimentos de programação e de projetos estruturais, proporcionando assim ao mercado, maior eficiência e tecnologia para as diversas etapas que envolvem o detalhamento de projetos.1NãoBrasilFT - Faculdade de TecnologiaManaus (AM)Engenharia Civil - Bacharelado - ManausSilva, Wagner Queirozhttp://lattes.cnpq.br/6875550399729689Moncayo, Winston Junior ZumaetaPio, José Luiz de SouzaMoraes, Jackeline Barbosa de2023-10-02T19:02:35Z2023-10-02T19:02:35Z2023-06-23info:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/bachelorThesishttp://riu.ufam.edu.br/handle/prefix/6968porAn error occurred getting the license - uri.info:eu-repo/semantics/openAccessreponame:Repositório Institucional da UFAMinstname:Universidade Federal do Amazonas (UFAM)instacron:UFAM2023-10-02T19:03:53Zoai:localhost:prefix/6968Repositório InstitucionalPUBhttp://riu.ufam.edu.br/oai/requestopendoar:2023-10-02T19:03:53Repositório Institucional da UFAM - Universidade Federal do Amazonas (UFAM)false |
dc.title.none.fl_str_mv |
Detalhamento de paredes de reservatórios de concreto armado usando a ferramenta Dynamo |
title |
Detalhamento de paredes de reservatórios de concreto armado usando a ferramenta Dynamo |
spellingShingle |
Detalhamento de paredes de reservatórios de concreto armado usando a ferramenta Dynamo Moraes, Jackeline Barbosa de Revit Dynamo Reservatórios de concreto armado Detalhamento de armaduras ENGENHARIAS: ENGENHARIA CIVIL: ESTRUTURAS: ESTRUTURAS DE CONCRETO Modelagem de informação da construção Construção de concreto armado Projeto estrutural |
title_short |
Detalhamento de paredes de reservatórios de concreto armado usando a ferramenta Dynamo |
title_full |
Detalhamento de paredes de reservatórios de concreto armado usando a ferramenta Dynamo |
title_fullStr |
Detalhamento de paredes de reservatórios de concreto armado usando a ferramenta Dynamo |
title_full_unstemmed |
Detalhamento de paredes de reservatórios de concreto armado usando a ferramenta Dynamo |
title_sort |
Detalhamento de paredes de reservatórios de concreto armado usando a ferramenta Dynamo |
author |
Moraes, Jackeline Barbosa de |
author_facet |
Moraes, Jackeline Barbosa de |
author_role |
author |
dc.contributor.none.fl_str_mv |
Silva, Wagner Queiroz http://lattes.cnpq.br/6875550399729689 Moncayo, Winston Junior Zumaeta Pio, José Luiz de Souza |
dc.contributor.author.fl_str_mv |
Moraes, Jackeline Barbosa de |
dc.subject.por.fl_str_mv |
Revit Dynamo Reservatórios de concreto armado Detalhamento de armaduras ENGENHARIAS: ENGENHARIA CIVIL: ESTRUTURAS: ESTRUTURAS DE CONCRETO Modelagem de informação da construção Construção de concreto armado Projeto estrutural |
topic |
Revit Dynamo Reservatórios de concreto armado Detalhamento de armaduras ENGENHARIAS: ENGENHARIA CIVIL: ESTRUTURAS: ESTRUTURAS DE CONCRETO Modelagem de informação da construção Construção de concreto armado Projeto estrutural |
description |
This present assignment aims to show a routine for the creation, distribution and automatic implementation of flexural reinforcement in reinforced concrete tank walls, through visual programming. Being a worldwide known software, especially with regard to the application of BIM methodology, Revit does not have specific resources for structural design, and is a type of program that does not include automatic checks against the guidelines established in Brazilian standards. Its way of implementing the reinforcement is done by prismatic element, being necessary to perform cuts in a geometric model to insert reinforcement "manually", or in three- dimensional view, and only then detail them, according to a previously performed design. The development of this type of project involves repetitive actions that can be made easier with the creation of automatic calculation routines. With the intention of facilitating and reducing these detailing processes, a visual programming routine was created in the Dynamo environment, responsible for automating the implementation of reinforcement in the model of reinforced concrete tank structures. The results indicate that, through computational routines, it may be possible to increase the efficiency of Revit software and integrate knowledge of programming and structural design, thus providing the market with greater efficiency and technology for the various stages that involve the detailing of projects. |
publishDate |
2023 |
dc.date.none.fl_str_mv |
2023-10-02T19:02:35Z 2023-10-02T19:02:35Z 2023-06-23 |
dc.type.status.fl_str_mv |
info:eu-repo/semantics/publishedVersion |
dc.type.driver.fl_str_mv |
info:eu-repo/semantics/bachelorThesis |
format |
bachelorThesis |
status_str |
publishedVersion |
dc.identifier.uri.fl_str_mv |
http://riu.ufam.edu.br/handle/prefix/6968 |
url |
http://riu.ufam.edu.br/handle/prefix/6968 |
dc.language.iso.fl_str_mv |
por |
language |
por |
dc.rights.driver.fl_str_mv |
An error occurred getting the license - uri. info:eu-repo/semantics/openAccess |
rights_invalid_str_mv |
An error occurred getting the license - uri. |
eu_rights_str_mv |
openAccess |
dc.publisher.none.fl_str_mv |
Brasil FT - Faculdade de Tecnologia Manaus (AM) Engenharia Civil - Bacharelado - Manaus |
publisher.none.fl_str_mv |
Brasil FT - Faculdade de Tecnologia Manaus (AM) Engenharia Civil - Bacharelado - Manaus |
dc.source.none.fl_str_mv |
reponame:Repositório Institucional da UFAM instname:Universidade Federal do Amazonas (UFAM) instacron:UFAM |
instname_str |
Universidade Federal do Amazonas (UFAM) |
instacron_str |
UFAM |
institution |
UFAM |
reponame_str |
Repositório Institucional da UFAM |
collection |
Repositório Institucional da UFAM |
repository.name.fl_str_mv |
Repositório Institucional da UFAM - Universidade Federal do Amazonas (UFAM) |
repository.mail.fl_str_mv |
|
_version_ |
1798061062771179520 |