Síntese, caracterização e estudo das propriedades magnéticas do Zn1-xFexO (0,00 ≤ x ≤ 0,09) produzido por reação de combustão

• Autor(a) principal: ALVES, Thiago Eduardo Pereira
• Data de Publicação: 2010
• Tipo de documento: Dissertação
• Idioma: por
• Título da fonte: Repositório Institucional da UFG
• dARK ID: ark:/38995/0013000009xkc
• Texto Completo: http://repositorio.bc.ufg.br/tede/handle/tde/1032
• topic: DMS; Combustão; Magnetismo; RTFM; DMS; Combustion; Magnetism; RTFM; CNPQ::CIENCIAS EXATAS E DA TERRA::QUIMICA

In this work compounds Zn1-xFexO, with 0.00 ≤ x ≤ 0.09, were synthesized by combustion reaction method with two different heating processes, in a thermal blanket and muffle furnace. Chemical analysis of compounds was performed by atomic absorption spectroscopy (AAS) and Fourier transform infrared (FTIR). Structural analysis of the crystalline phase, the diameter of the crystallites and the lattice parameters were checked by X-ray diffraction (XRD, powder method) and refinement software (Unitt and powder X cell). The analysis of surfaces and morphologies were determined by adsorption and desorption of N2 (ASAP, BET model) and transmission electron microscopy (TEM). Finally, Magnetic measurements were performed by vibrating sample magnetometer (VSM). The stoichiometric determined by atomic absorption is in good agreement with the calculated value for all samples. The samples were synthesized in a thermal blanket which corresponds to the wurtzite crystal structure with no secondary phases. The samples synthesized in furnace had wurtzite crystal structure, however, showed a small sample to phase segregation above 5%. The second phases are found with spinel phase indicate that the formation of zinc ferrite. The data of thermal analysis, infrared and X-ray diffraction, we show that the synthesis product in blanket form moving slowly in several stages, while that in the synthesis furnace gets the product directly. We noted the tendency of the formation of smaller particles for the samples from the thermal blanket, as well as high surface areas for these samples, those prepared in a muffle grating. Images by transmission electron microscopy confirm the observations made by x-ray diffraction measurements of surface areas by BET model. The magnetic measurements show ferromagnetic phenomenon only for the sample produced in a muffle. The saturation magnetization was calculated by extrapolation, and their values are promising when compared with the literature. The Curie temperatures were estimated for some samples and all values were well above room temperature.