Acúmulo e carreamento de poluentes em superfície de estacionamento

• Autor(a) principal: Pauletti, Luciana Inácio
• Data de Publicação: 2012
• Tipo de documento: Dissertação
• Idioma: por
• Título da fonte: Repositório Institucional da UFG
• dARK ID: ark:/38995/0013000007w2c
• Texto Completo: http://repositorio.bc.ufg.br/tede/handle/tede/4491
• topic: Acúmulo; Carreamento; Superfície pavimentada,; Água pluvial urbana; Build-up; Wash-off; Paved surface; Urban stormwater; ENGENHARIAS

The stormwater runoff in urban areas is an important source of non-point pollutants. This study aimed to quantify the build-up and wash-off of pollutants, particularly metals, water runoff from a paved surface urban Goiânia. Studies to estimate the processes of build-up and wash-off are still incipient in Brazil. We evaluated twelve plots paved with size of 3m2, located in a public parking lot, where they were analyzed on build-up and wash-off in June and July 2012. To wash-off was used a rainfall simulator in three intensities, 69 mm/h, 109 mm/h and 180 mm/h. Quantitation of accumulation in sampled surfaces determined load per m2 to obtain the coefficient build-up as well as for the analysis of the influence of background dried days before sampling campaigns. The build-up was adjusted at four possible equations for use in models water quality: (1) Linear, (2) Power (3) Exponential, and (4) Michaelis-Menton by obtaining the best fit. The water quality parameters analyzed were used for calculation of Average Concentration Event (CME), building polutogramas, coefficient of wash-off and correlation analyzes. The accumulation rate obtained was, on average, 8.53 g/m2dia, and more days dry, the greater the accumulation of pollutants. Levels of metals were found in all analyzed plots for all simulated events in different periods. There sharp and direct correlation between variables, particularly suspended solids and metals. The intensity of rain on the wash-off was clear, since the simulated rain intensity shifted with greater dirtier. Parameters were obtained for modeling the quality of rainwater.