Avaliação físico-química e microbiológica de lodo antigo proveniente de um sistema de lagoas de estabilização usado para tratamento de efluentes de indústrias frigoríficas

• Autor(a) principal: Carneiro, Ricardo de Sousa
• Data de Publicação: 2014
• Tipo de documento: Dissertação
• Idioma: por
• Título da fonte: Repositório Institucional da UFMT
• Texto Completo: http://ri.ufmt.br/handle/1/527
• topic: Biossólidos; Patógenos em lodos; Destinação de lodo de ETE; CNPQ::ENGENHARIAS; Biosolids; Pathogens in sludge; Disposal of sludge STE

Slaughterhouses are inserted as the most frequent industrial enterprise in Mato Grosso justified mainly by agriculture is the main economic activity in the state, making slaughterhouses an option to add value to what is created here, especially in the production of cattle and poultry. Intrinsic to the slaughter industry is the generation of wastewater that must be treated prior to disposal in soil or water bodies. Stabilization ponds are the main type of treatment of this effluent in refrigerators in the state. This type of treatment generates a semisolid residue called sludge. This by-product can be rich in nutrients making it a material that is called biosolids. However, to receive this designation sludge stabilization ponds shall provide chemical and biological characteristics consistent with its use. These characteristics are also relevant as to pathogenicity. In Brazil, the CONAMA Resolution 375/2006 establishes parameters for concentration of microorganisms for use of sludge generated in wastewater treatment systems as a source of nutrients to the soil. In Várzea Grande – MT a complex of industries slaughter, installed since the late '70s, their effluents destined to a wastewater treatment system consisting of stabilization ponds containing two anaerobic ponds, a facultative pond and maturation pond. In January 2012 this treatment effluent was deactivated and replaced by another in another area, the sludge present in the system was assembled in both aerobic lagoons aiming its stabilization, dewatering and blanketing of pathogens. Given this context, this study evaluated qualitative and quantitatively the accumulated sludge from the waste stabilization ponds of complex industries with a view to disposal in soil. To this end, two studies bathymetry, one in October 2012 and another in January 2014, the determination of physico-chemical parameters of TSS, pH, BOD, COD, nitrogen and phosphorus concentrations and the determination of helminth eggs were performed , thermotolerant coliforms and Salmonella with the second test bathymetry. Finally, it is concluded that the sludge collected in anaerobic pounds reduced by approximately 30% in volume, has satisfactory nitrogen concentration compared to other materials used as biosolids, but poor in phosphorus performing the same comparison. Salmonella is absent and has high moisture content, around 98%, and concentrations of thermotolerant coliform microorganisms and helminth eggs above those permitted by CONAMA Resolution 375/2006 which prevents, for now, their use in soil. Was also determined according to the methodology presented formulations and local conditions, that until February 2015 the sludge possess humidity close to 70%. Suggestions for accelerated dewatering and blanketing are also present in this work.