ERRORS MEASUREMENT OF INTERPOLATION METHODS FOR GEOID MODELS: STUDY CASE IN THE BRAZILIAN REGION

• Autor(a) principal: Arana, Daniel
• Data de Publicação: 2018
• Outros Autores: Prol, Fabricio dos Santos, Camargo, Paulo de Oliveira, Guimarães, Gabriel do Nascimento
• Tipo de documento: Artigo
• Idioma: eng
• Título da fonte: Boletim de Ciências Geodésicas
• Texto Completo: https://revistas.ufpr.br/bcg/article/view/58633
• topic: Geociências; Geodésia; MAPGEO2015; Bilinear; Spline; RBF

The geoid is an equipotential surface regarded as the altimetric reference for geodetic surveys and it therefore, has several practical applications for engineers. In recent decades the geodetic community has concentrated efforts on the development of highly accurate geoid models through modern techniques. These models are supplied through regular grids which users need to make interpolations. Yet, little information can be obtained regarding the most appropriate interpolation method to extract information from the regular grid of geoidal models. The use of an interpolator that does not represent the geoid surface appropriately can impair the quality of geoid undulations and consequently the height transformation. This work aims to quantify the magnitude of error that comes from a regular mesh of geoid models. The analysis consisted of performing a comparison between the interpolation of the MAPGEO2015 program and three interpolation methods: bilinear, cubic spline and neural networks Radial Basis Function. As a result of the experiments, it was concluded that 2.5 cm of the 18 cm error of the MAPGEO2015 validation is caused by the use of interpolations in the 5'x5' grid.