Análise comparativa entre propriedades mecânicas, termofísicas e geométricas de tijolos produzidos pelos fornos caieira e abóbada
Autor(a) principal: | |
---|---|
Data de Publicação: | 2011 |
Tipo de documento: | Dissertação |
Idioma: | por |
Título da fonte: | Repositório Institucional da UFRN |
Texto Completo: | https://repositorio.ufrn.br/jspui/handle/123456789/15640 |
Resumo: | In the State of Rio Grande do Norte potteries are distributed in several counties in the four meso, which are: West Potiguar, Center Potiguar, Agreste Potiguar and East Portiguar. The ceramics, mostly, are responsible for products used in construction as bricks, tiles and white brick and wood used as fuel. This paper had a primary focus in the region of Seridó. The furnaces in this region, used to manufacture bricks are configured Caieira and Valt, in most of them using principles rustic, usually operated in an empirical way, using principles of control rather primitive, predominantly visual control. The focus of this study was to analyze the differences in the thermophysical, mechanical and geometric characteristics of bricks produced by Caieira and vault furnaces, using the NBR 15720 and the evaluation of energy efficiency in both furnaces. Thermophysical characteristics were analyzed through tests to determine the water absorption obtained from the difference between dry mass and wet mass of the sample and analysis of the thermal gradient, the mechanical characteristics from determination of the compressive strength of ceramic brick popularly known as bricks and also analyzed the geometrical characteristics of the bricks in order to verify the homogeneity of manufacturing. The tests showed that the energy difference of the two furnaces is not considered responsible for a significant difference in the properties of the products |
id |
UFRN_352f5ad62008d17cba913c90556f68d7 |
---|---|
oai_identifier_str |
oai:https://repositorio.ufrn.br:123456789/15640 |
network_acronym_str |
UFRN |
network_name_str |
Repositório Institucional da UFRN |
repository_id_str |
|
spelling |
Silva, Rodrigo Márcio dahttp://lattes.cnpq.br/6920219141949735http://lattes.cnpq.br/7103009428184656Souza, Luiz Guilherme Meira dehttp://lattes.cnpq.br/0801747108308706Souza, Roberto Silva dehttp://lattes.cnpq.br/4012782800846844Mendes, José Ubiragi de Lima2014-12-17T14:58:06Z2011-11-292014-12-17T14:58:06Z2011-03-30SILVA, Rodrigo Márcio da. Análise comparativa entre propriedades mecânicas, termofísicas e geométricas de tijolos produzidos pelos fornos caieira e abóbada. 2011. 77 f. Dissertação (Mestrado em Tecnologia de Materiais; Projetos Mecânicos; Termociências) - Universidade Federal do Rio Grande do Norte, Natal, 2011.https://repositorio.ufrn.br/jspui/handle/123456789/15640In the State of Rio Grande do Norte potteries are distributed in several counties in the four meso, which are: West Potiguar, Center Potiguar, Agreste Potiguar and East Portiguar. The ceramics, mostly, are responsible for products used in construction as bricks, tiles and white brick and wood used as fuel. This paper had a primary focus in the region of Seridó. The furnaces in this region, used to manufacture bricks are configured Caieira and Valt, in most of them using principles rustic, usually operated in an empirical way, using principles of control rather primitive, predominantly visual control. The focus of this study was to analyze the differences in the thermophysical, mechanical and geometric characteristics of bricks produced by Caieira and vault furnaces, using the NBR 15720 and the evaluation of energy efficiency in both furnaces. Thermophysical characteristics were analyzed through tests to determine the water absorption obtained from the difference between dry mass and wet mass of the sample and analysis of the thermal gradient, the mechanical characteristics from determination of the compressive strength of ceramic brick popularly known as bricks and also analyzed the geometrical characteristics of the bricks in order to verify the homogeneity of manufacturing. The tests showed that the energy difference of the two furnaces is not considered responsible for a significant difference in the properties of the productsNo estado do Rio Grande do Norte as olarias são distribuídas em diversos municípios, nas quatro mesorregiões, que são: Oeste Potiguar, Centro Potiguar, Agreste Potiguar e Leste Potiguar. As cerâmicas, em sua maioria, são responsáveis por produtos utilizados na construção civil como tijolos furados, tijolos brancos e telhas e utilizam como combustível a lenha. Este trabalho teve um enfoque principal na indústria cerâmica na região do Seridó. Os fornos nessa região, utilizados para a fabricação de tijolos furados possuem a configuração caieira e abóbada, geralmente operados de forma empírica, utilizando princípios de controle bastante primitivos, sendo predominante o controle visual. O objetivo deste trabalho foi analisar as diferenças nas características termofísicas, mecânicas e geométricas dos tijolos produzidos pelos fornos caieira e abóbada, utilizando a NBR 15720, que trata de blocos de alvenaria e a avaliação do rendimento energético de ambos os fornos. Foram analisadas as características termofísicas por meio dos ensaios de determinação da absorção de água obtido a partir da diferença entre a massa seca e a massa úmida das amostras e da análise do gradiente térmico; as características mecânicas a partir da determinação da resistência à compressão dos blocos cerâmicos popularmente conhecidos como tijolos e também foram analisadas as características geométricas dos tijolos com o objetivo de verificar a homogeneidade da fabricação. Os ensaios realizados mostraram que a diferença energética dos dois tipos de fornos analisados não é responsável por uma diferença significativa nas propriedades dos produtos produzidosapplication/pdfporUniversidade Federal do Rio Grande do NortePrograma de Pós-Graduação em Engenharia MecânicaUFRNBRTecnologia de Materiais; Projetos Mecânicos; TermociênciasArgilaCerâmicaFornosTijolosConformidadeClayFurnacesBricksConformityCNPQ::ENGENHARIAS::ENGENHARIA MECANICAAnálise comparativa entre propriedades mecânicas, termofísicas e geométricas de tijolos produzidos pelos fornos caieira e abóbadainfo:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/masterThesisinfo:eu-repo/semantics/openAccessreponame:Repositório Institucional da UFRNinstname:Universidade Federal do Rio Grande do Norte (UFRN)instacron:UFRNORIGINALRodrigoMS_DISSERT.pdfapplication/pdf4460162https://repositorio.ufrn.br/bitstream/123456789/15640/1/RodrigoMS_DISSERT.pdf823c9d3e0475b4431fb15b4de861b51bMD51TEXTRodrigoMS_DISSERT.pdf.txtRodrigoMS_DISSERT.pdf.txtExtracted texttext/plain106074https://repositorio.ufrn.br/bitstream/123456789/15640/6/RodrigoMS_DISSERT.pdf.txteec23190e926a15303da15d19817f2c2MD56THUMBNAILRodrigoMS_DISSERT.pdf.jpgRodrigoMS_DISSERT.pdf.jpgIM Thumbnailimage/jpeg3935https://repositorio.ufrn.br/bitstream/123456789/15640/7/RodrigoMS_DISSERT.pdf.jpg7a95e6c8a54670349a1e7db7103d57d4MD57123456789/156402017-11-01 22:35:22.191oai:https://repositorio.ufrn.br:123456789/15640Repositório de PublicaçõesPUBhttp://repositorio.ufrn.br/oai/opendoar:2017-11-02T01:35:22Repositório Institucional da UFRN - Universidade Federal do Rio Grande do Norte (UFRN)false |
dc.title.por.fl_str_mv |
Análise comparativa entre propriedades mecânicas, termofísicas e geométricas de tijolos produzidos pelos fornos caieira e abóbada |
title |
Análise comparativa entre propriedades mecânicas, termofísicas e geométricas de tijolos produzidos pelos fornos caieira e abóbada |
spellingShingle |
Análise comparativa entre propriedades mecânicas, termofísicas e geométricas de tijolos produzidos pelos fornos caieira e abóbada Silva, Rodrigo Márcio da Argila Cerâmica Fornos Tijolos Conformidade Clay Furnaces Bricks Conformity CNPQ::ENGENHARIAS::ENGENHARIA MECANICA |
title_short |
Análise comparativa entre propriedades mecânicas, termofísicas e geométricas de tijolos produzidos pelos fornos caieira e abóbada |
title_full |
Análise comparativa entre propriedades mecânicas, termofísicas e geométricas de tijolos produzidos pelos fornos caieira e abóbada |
title_fullStr |
Análise comparativa entre propriedades mecânicas, termofísicas e geométricas de tijolos produzidos pelos fornos caieira e abóbada |
title_full_unstemmed |
Análise comparativa entre propriedades mecânicas, termofísicas e geométricas de tijolos produzidos pelos fornos caieira e abóbada |
title_sort |
Análise comparativa entre propriedades mecânicas, termofísicas e geométricas de tijolos produzidos pelos fornos caieira e abóbada |
author |
Silva, Rodrigo Márcio da |
author_facet |
Silva, Rodrigo Márcio da |
author_role |
author |
dc.contributor.authorID.por.fl_str_mv |
|
dc.contributor.authorLattes.por.fl_str_mv |
http://lattes.cnpq.br/6920219141949735 |
dc.contributor.advisorID.por.fl_str_mv |
|
dc.contributor.advisorLattes.por.fl_str_mv |
http://lattes.cnpq.br/7103009428184656 |
dc.contributor.referees1.pt_BR.fl_str_mv |
Souza, Luiz Guilherme Meira de |
dc.contributor.referees1ID.por.fl_str_mv |
|
dc.contributor.referees1Lattes.por.fl_str_mv |
http://lattes.cnpq.br/0801747108308706 |
dc.contributor.referees2.pt_BR.fl_str_mv |
Souza, Roberto Silva de |
dc.contributor.referees2ID.por.fl_str_mv |
|
dc.contributor.referees2Lattes.por.fl_str_mv |
http://lattes.cnpq.br/4012782800846844 |
dc.contributor.author.fl_str_mv |
Silva, Rodrigo Márcio da |
dc.contributor.advisor1.fl_str_mv |
Mendes, José Ubiragi de Lima |
contributor_str_mv |
Mendes, José Ubiragi de Lima |
dc.subject.por.fl_str_mv |
Argila Cerâmica Fornos Tijolos Conformidade |
topic |
Argila Cerâmica Fornos Tijolos Conformidade Clay Furnaces Bricks Conformity CNPQ::ENGENHARIAS::ENGENHARIA MECANICA |
dc.subject.eng.fl_str_mv |
Clay Furnaces Bricks Conformity |
dc.subject.cnpq.fl_str_mv |
CNPQ::ENGENHARIAS::ENGENHARIA MECANICA |
description |
In the State of Rio Grande do Norte potteries are distributed in several counties in the four meso, which are: West Potiguar, Center Potiguar, Agreste Potiguar and East Portiguar. The ceramics, mostly, are responsible for products used in construction as bricks, tiles and white brick and wood used as fuel. This paper had a primary focus in the region of Seridó. The furnaces in this region, used to manufacture bricks are configured Caieira and Valt, in most of them using principles rustic, usually operated in an empirical way, using principles of control rather primitive, predominantly visual control. The focus of this study was to analyze the differences in the thermophysical, mechanical and geometric characteristics of bricks produced by Caieira and vault furnaces, using the NBR 15720 and the evaluation of energy efficiency in both furnaces. Thermophysical characteristics were analyzed through tests to determine the water absorption obtained from the difference between dry mass and wet mass of the sample and analysis of the thermal gradient, the mechanical characteristics from determination of the compressive strength of ceramic brick popularly known as bricks and also analyzed the geometrical characteristics of the bricks in order to verify the homogeneity of manufacturing. The tests showed that the energy difference of the two furnaces is not considered responsible for a significant difference in the properties of the products |
publishDate |
2011 |
dc.date.available.fl_str_mv |
2011-11-29 2014-12-17T14:58:06Z |
dc.date.issued.fl_str_mv |
2011-03-30 |
dc.date.accessioned.fl_str_mv |
2014-12-17T14:58:06Z |
dc.type.status.fl_str_mv |
info:eu-repo/semantics/publishedVersion |
dc.type.driver.fl_str_mv |
info:eu-repo/semantics/masterThesis |
format |
masterThesis |
status_str |
publishedVersion |
dc.identifier.citation.fl_str_mv |
SILVA, Rodrigo Márcio da. Análise comparativa entre propriedades mecânicas, termofísicas e geométricas de tijolos produzidos pelos fornos caieira e abóbada. 2011. 77 f. Dissertação (Mestrado em Tecnologia de Materiais; Projetos Mecânicos; Termociências) - Universidade Federal do Rio Grande do Norte, Natal, 2011. |
dc.identifier.uri.fl_str_mv |
https://repositorio.ufrn.br/jspui/handle/123456789/15640 |
identifier_str_mv |
SILVA, Rodrigo Márcio da. Análise comparativa entre propriedades mecânicas, termofísicas e geométricas de tijolos produzidos pelos fornos caieira e abóbada. 2011. 77 f. Dissertação (Mestrado em Tecnologia de Materiais; Projetos Mecânicos; Termociências) - Universidade Federal do Rio Grande do Norte, Natal, 2011. |
url |
https://repositorio.ufrn.br/jspui/handle/123456789/15640 |
dc.language.iso.fl_str_mv |
por |
language |
por |
dc.rights.driver.fl_str_mv |
info:eu-repo/semantics/openAccess |
eu_rights_str_mv |
openAccess |
dc.format.none.fl_str_mv |
application/pdf |
dc.publisher.none.fl_str_mv |
Universidade Federal do Rio Grande do Norte |
dc.publisher.program.fl_str_mv |
Programa de Pós-Graduação em Engenharia Mecânica |
dc.publisher.initials.fl_str_mv |
UFRN |
dc.publisher.country.fl_str_mv |
BR |
dc.publisher.department.fl_str_mv |
Tecnologia de Materiais; Projetos Mecânicos; Termociências |
publisher.none.fl_str_mv |
Universidade Federal do Rio Grande do Norte |
dc.source.none.fl_str_mv |
reponame:Repositório Institucional da UFRN instname:Universidade Federal do Rio Grande do Norte (UFRN) instacron:UFRN |
instname_str |
Universidade Federal do Rio Grande do Norte (UFRN) |
instacron_str |
UFRN |
institution |
UFRN |
reponame_str |
Repositório Institucional da UFRN |
collection |
Repositório Institucional da UFRN |
bitstream.url.fl_str_mv |
https://repositorio.ufrn.br/bitstream/123456789/15640/1/RodrigoMS_DISSERT.pdf https://repositorio.ufrn.br/bitstream/123456789/15640/6/RodrigoMS_DISSERT.pdf.txt https://repositorio.ufrn.br/bitstream/123456789/15640/7/RodrigoMS_DISSERT.pdf.jpg |
bitstream.checksum.fl_str_mv |
823c9d3e0475b4431fb15b4de861b51b eec23190e926a15303da15d19817f2c2 7a95e6c8a54670349a1e7db7103d57d4 |
bitstream.checksumAlgorithm.fl_str_mv |
MD5 MD5 MD5 |
repository.name.fl_str_mv |
Repositório Institucional da UFRN - Universidade Federal do Rio Grande do Norte (UFRN) |
repository.mail.fl_str_mv |
|
_version_ |
1802117575354613760 |