Effect of workpiece geometry on the uniformity of nitrided layers
Autor(a) principal: | |
---|---|
Data de Publicação: | 2001 |
Outros Autores: | , |
Tipo de documento: | Artigo |
Idioma: | eng |
Título da fonte: | Repositório Institucional da UFRN |
Texto Completo: | https://repositorio.ufrn.br/handle/123456789/31468 |
Resumo: | The growth behavior of plasma-nitrided layers on workpieces with complex geometry was systematically investigated. AISI 316 stainless steel pellets with different heights were nitrided under a mixture of N2–80% H2 at different temperatures (673, 773 and 843 K) and pressures (100 and 500 Pa). Significant differences in thickness and hardness of the resulting nitrided layers were observed as a function of nitriding parameters. The thickness of nitrided layers increased with sample height, excepted those nitrided at 843 K. The diameter of eroded rings, commonly observed on nitrided samples, varied with coupon height. Changes in both layer thickness and eroded ring diameter are presently addressed based on the thermal balance and charge density that take place near the edges of the samples |
id |
UFRN_67af3271bc2d2c02597ffe4dc21b4159 |
---|---|
oai_identifier_str |
oai:https://repositorio.ufrn.br:123456789/31468 |
network_acronym_str |
UFRN |
network_name_str |
Repositório Institucional da UFRN |
repository_id_str |
|
spelling |
Alves Júnior, ClodomiroSilva, Eronildes Felisberto daMartinelli, Antonio Eduardo2021-02-10T20:00:27Z2021-02-10T20:00:27Z2001-05-01ALVES JÚNIOR, Clodomiro ; SILVA, E. F. ; MARTINELLI, A. E. . Effect of Workpiece geometry on the uniformity of nitrided layers. Surface and Coatings Technology, v. 139, n.1, p. 1-5, 2001. Disponível em: https://www.sciencedirect.com/science/article/abs/pii/S0257897200011464?via%3Dihub Acesso em: 26 nov. 2020. https://doi.org/10.1016/S0257-8972(00)01146-40257-8972https://repositorio.ufrn.br/handle/123456789/3146810.1016/S0257-8972(00)01146-4ElsevierAttribution 3.0 Brazilhttp://creativecommons.org/licenses/by/3.0/br/info:eu-repo/semantics/openAccessStainless steelErosionPlasma nitridingGlow discharge sputteringEffect of workpiece geometry on the uniformity of nitrided layersinfo:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/articleThe growth behavior of plasma-nitrided layers on workpieces with complex geometry was systematically investigated. AISI 316 stainless steel pellets with different heights were nitrided under a mixture of N2–80% H2 at different temperatures (673, 773 and 843 K) and pressures (100 and 500 Pa). Significant differences in thickness and hardness of the resulting nitrided layers were observed as a function of nitriding parameters. The thickness of nitrided layers increased with sample height, excepted those nitrided at 843 K. The diameter of eroded rings, commonly observed on nitrided samples, varied with coupon height. Changes in both layer thickness and eroded ring diameter are presently addressed based on the thermal balance and charge density that take place near the edges of the samplesengreponame:Repositório Institucional da UFRNinstname:Universidade Federal do Rio Grande do Norte (UFRN)instacron:UFRNCC-LICENSElicense_rdflicense_rdfapplication/rdf+xml; charset=utf-8914https://repositorio.ufrn.br/bitstream/123456789/31468/2/license_rdf4d2950bda3d176f570a9f8b328dfbbefMD52LICENSElicense.txtlicense.txttext/plain; charset=utf-81484https://repositorio.ufrn.br/bitstream/123456789/31468/3/license.txte9597aa2854d128fd968be5edc8a28d9MD53ORIGINALEffectWorkpiece_MARTINELLI_2001.pdfEffectWorkpiece_MARTINELLI_2001.pdfapplication/pdf819578https://repositorio.ufrn.br/bitstream/123456789/31468/1/EffectWorkpiece_MARTINELLI_2001.pdfcf2cb068947f7fea80bfce4a6cd2f09dMD51TEXTEffectWorkpiece_MARTINELLI_2001.pdf.txtEffectWorkpiece_MARTINELLI_2001.pdf.txtExtracted texttext/plain18123https://repositorio.ufrn.br/bitstream/123456789/31468/4/EffectWorkpiece_MARTINELLI_2001.pdf.txtf8601962442f909ab3875a7756bd2f99MD54THUMBNAILEffectWorkpiece_MARTINELLI_2001.pdf.jpgEffectWorkpiece_MARTINELLI_2001.pdf.jpgGenerated Thumbnailimage/jpeg1762https://repositorio.ufrn.br/bitstream/123456789/31468/5/EffectWorkpiece_MARTINELLI_2001.pdf.jpg9b1e6b2a5acc8ccc5fc9c35a6effc83fMD55123456789/314682021-02-14 05:48:02.497oai:https://repositorio.ufrn.br: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Repositório de PublicaçõesPUBhttp://repositorio.ufrn.br/oai/opendoar:2021-02-14T08:48:02Repositório Institucional da UFRN - Universidade Federal do Rio Grande do Norte (UFRN)false |
dc.title.pt_BR.fl_str_mv |
Effect of workpiece geometry on the uniformity of nitrided layers |
title |
Effect of workpiece geometry on the uniformity of nitrided layers |
spellingShingle |
Effect of workpiece geometry on the uniformity of nitrided layers Alves Júnior, Clodomiro Stainless steel Erosion Plasma nitriding Glow discharge sputtering |
title_short |
Effect of workpiece geometry on the uniformity of nitrided layers |
title_full |
Effect of workpiece geometry on the uniformity of nitrided layers |
title_fullStr |
Effect of workpiece geometry on the uniformity of nitrided layers |
title_full_unstemmed |
Effect of workpiece geometry on the uniformity of nitrided layers |
title_sort |
Effect of workpiece geometry on the uniformity of nitrided layers |
author |
Alves Júnior, Clodomiro |
author_facet |
Alves Júnior, Clodomiro Silva, Eronildes Felisberto da Martinelli, Antonio Eduardo |
author_role |
author |
author2 |
Silva, Eronildes Felisberto da Martinelli, Antonio Eduardo |
author2_role |
author author |
dc.contributor.author.fl_str_mv |
Alves Júnior, Clodomiro Silva, Eronildes Felisberto da Martinelli, Antonio Eduardo |
dc.subject.por.fl_str_mv |
Stainless steel Erosion Plasma nitriding Glow discharge sputtering |
topic |
Stainless steel Erosion Plasma nitriding Glow discharge sputtering |
description |
The growth behavior of plasma-nitrided layers on workpieces with complex geometry was systematically investigated. AISI 316 stainless steel pellets with different heights were nitrided under a mixture of N2–80% H2 at different temperatures (673, 773 and 843 K) and pressures (100 and 500 Pa). Significant differences in thickness and hardness of the resulting nitrided layers were observed as a function of nitriding parameters. The thickness of nitrided layers increased with sample height, excepted those nitrided at 843 K. The diameter of eroded rings, commonly observed on nitrided samples, varied with coupon height. Changes in both layer thickness and eroded ring diameter are presently addressed based on the thermal balance and charge density that take place near the edges of the samples |
publishDate |
2001 |
dc.date.issued.fl_str_mv |
2001-05-01 |
dc.date.accessioned.fl_str_mv |
2021-02-10T20:00:27Z |
dc.date.available.fl_str_mv |
2021-02-10T20:00:27Z |
dc.type.status.fl_str_mv |
info:eu-repo/semantics/publishedVersion |
dc.type.driver.fl_str_mv |
info:eu-repo/semantics/article |
format |
article |
status_str |
publishedVersion |
dc.identifier.citation.fl_str_mv |
ALVES JÚNIOR, Clodomiro ; SILVA, E. F. ; MARTINELLI, A. E. . Effect of Workpiece geometry on the uniformity of nitrided layers. Surface and Coatings Technology, v. 139, n.1, p. 1-5, 2001. Disponível em: https://www.sciencedirect.com/science/article/abs/pii/S0257897200011464?via%3Dihub Acesso em: 26 nov. 2020. https://doi.org/10.1016/S0257-8972(00)01146-4 |
dc.identifier.uri.fl_str_mv |
https://repositorio.ufrn.br/handle/123456789/31468 |
dc.identifier.issn.none.fl_str_mv |
0257-8972 |
dc.identifier.doi.none.fl_str_mv |
10.1016/S0257-8972(00)01146-4 |
identifier_str_mv |
ALVES JÚNIOR, Clodomiro ; SILVA, E. F. ; MARTINELLI, A. E. . Effect of Workpiece geometry on the uniformity of nitrided layers. Surface and Coatings Technology, v. 139, n.1, p. 1-5, 2001. Disponível em: https://www.sciencedirect.com/science/article/abs/pii/S0257897200011464?via%3Dihub Acesso em: 26 nov. 2020. https://doi.org/10.1016/S0257-8972(00)01146-4 0257-8972 10.1016/S0257-8972(00)01146-4 |
url |
https://repositorio.ufrn.br/handle/123456789/31468 |
dc.language.iso.fl_str_mv |
eng |
language |
eng |
dc.rights.driver.fl_str_mv |
Attribution 3.0 Brazil http://creativecommons.org/licenses/by/3.0/br/ info:eu-repo/semantics/openAccess |
rights_invalid_str_mv |
Attribution 3.0 Brazil http://creativecommons.org/licenses/by/3.0/br/ |
eu_rights_str_mv |
openAccess |
dc.publisher.none.fl_str_mv |
Elsevier |
publisher.none.fl_str_mv |
Elsevier |
dc.source.none.fl_str_mv |
reponame:Repositório Institucional da UFRN instname:Universidade Federal do Rio Grande do Norte (UFRN) instacron:UFRN |
instname_str |
Universidade Federal do Rio Grande do Norte (UFRN) |
instacron_str |
UFRN |
institution |
UFRN |
reponame_str |
Repositório Institucional da UFRN |
collection |
Repositório Institucional da UFRN |
bitstream.url.fl_str_mv |
https://repositorio.ufrn.br/bitstream/123456789/31468/2/license_rdf https://repositorio.ufrn.br/bitstream/123456789/31468/3/license.txt https://repositorio.ufrn.br/bitstream/123456789/31468/1/EffectWorkpiece_MARTINELLI_2001.pdf https://repositorio.ufrn.br/bitstream/123456789/31468/4/EffectWorkpiece_MARTINELLI_2001.pdf.txt https://repositorio.ufrn.br/bitstream/123456789/31468/5/EffectWorkpiece_MARTINELLI_2001.pdf.jpg |
bitstream.checksum.fl_str_mv |
4d2950bda3d176f570a9f8b328dfbbef e9597aa2854d128fd968be5edc8a28d9 cf2cb068947f7fea80bfce4a6cd2f09d f8601962442f909ab3875a7756bd2f99 9b1e6b2a5acc8ccc5fc9c35a6effc83f |
bitstream.checksumAlgorithm.fl_str_mv |
MD5 MD5 MD5 MD5 MD5 |
repository.name.fl_str_mv |
Repositório Institucional da UFRN - Universidade Federal do Rio Grande do Norte (UFRN) |
repository.mail.fl_str_mv |
|
_version_ |
1814832764987375616 |