QUALITY OF SAWN TIMBER DRYING OF Eucalyptus dunnii

Detalhes bibliográficos
Autor(a) principal: Severo, Elias Taylor Durgante
Data de Publicação: 2000
Tipo de documento: Artigo
Idioma: por
Título da fonte: Ciência Florestal (Online)
DOI: 10.5902/19805098399
Texto Completo: https://periodicos.ufsm.br/cienciaflorestal/article/view/399
Resumo: In the present study, the behaviour of Eucalyptus dunnii wood drying in a conventional pilot kiln was evaluated, using three drying schedules. Each drying schedule had an initial vaporization (presteaming) of 3 hours after one hour of initial warming and an intermediate vaporization of 5 hours for the collapse recovery when the wood was at 17% of humidity. The results show that among the used drying schedule only the schedule regarded as the mildest presented a good result in terms of dry wood quality. Among the discovered defects, there were 37,5% of collapse, 35% of cupping and 10% of split. Hoviever, though from this total only 15% of the collapse and cupping were regarded as strong defects.
id UFSM-6_827e1230208a1b84c552d8bf7158253f
oai_identifier_str oai:ojs.pkp.sfu.ca:article/399
network_acronym_str UFSM-6
network_name_str Ciência Florestal (Online)
spelling QUALITY OF SAWN TIMBER DRYING OF Eucalyptus dunniiQualidade da secagem de madeira serrada de Eucalyptus dunnii. Eucaliptus dunniipresteamingconventional drying.Eucalyptus dunnii/i>pré-vaporizaçãosecagem convencional. In the present study, the behaviour of Eucalyptus dunnii wood drying in a conventional pilot kiln was evaluated, using three drying schedules. Each drying schedule had an initial vaporization (presteaming) of 3 hours after one hour of initial warming and an intermediate vaporization of 5 hours for the collapse recovery when the wood was at 17% of humidity. The results show that among the used drying schedule only the schedule regarded as the mildest presented a good result in terms of dry wood quality. Among the discovered defects, there were 37,5% of collapse, 35% of cupping and 10% of split. Hoviever, though from this total only 15% of the collapse and cupping were regarded as strong defects. No presente estudo, foi avaliado o comportamento de secagem da madeira de Eucalyptus dunnii em estufa piloto convencional, utilizando-se três programas de secagem. Cada programa de secagem teve uma vaporização inicial (pré-vaporização) de 3 horas após uma hora de aquecimento inicial e uma vaporização intermediária de 5 horas para recuperação do colapso, quando a madeira se encontrava a 17% de umidade. Os resultados mostram que, entre os programas de secagem utilizados, somente o programa considerado o mais suave apresentou um bom resultado em termos de qualidade de madeira seca. Entre os defeitos encontrados estão 37,5% de colapso, 35% de encanoamento e 10% de rachaduras. Embora, desse total, somente 15% do colapso e encanoamento foram classificados como defeitos fortes.Universidade Federal de Santa Maria2000-03-30info:eu-repo/semantics/articleinfo:eu-repo/semantics/publishedVersionapplication/pdfhttps://periodicos.ufsm.br/cienciaflorestal/article/view/39910.5902/19805098399Ciência Florestal; Vol. 10 No. 1 (2000); 109-124Ciência Florestal; v. 10 n. 1 (2000); 109-1241980-50980103-9954reponame:Ciência Florestal (Online)instname:Universidade Federal de Santa Maria (UFSM)instacron:UFSMporhttps://periodicos.ufsm.br/cienciaflorestal/article/view/399/271Severo, Elias Taylor Durganteinfo:eu-repo/semantics/openAccess2017-06-07T18:29:44Zoai:ojs.pkp.sfu.ca:article/399Revistahttp://www.ufsm.br/cienciaflorestal/ONGhttps://old.scielo.br/oai/scielo-oai.php||cienciaflorestal@ufsm.br|| cienciaflorestal@gmail.com|| cf@smail.ufsm.br1980-50980103-9954opendoar:2017-06-07T18:29:44Ciência Florestal (Online) - Universidade Federal de Santa Maria (UFSM)false
dc.title.none.fl_str_mv QUALITY OF SAWN TIMBER DRYING OF Eucalyptus dunnii
Qualidade da secagem de madeira serrada de Eucalyptus dunnii.
title QUALITY OF SAWN TIMBER DRYING OF Eucalyptus dunnii
spellingShingle QUALITY OF SAWN TIMBER DRYING OF Eucalyptus dunnii
QUALITY OF SAWN TIMBER DRYING OF Eucalyptus dunnii
Severo, Elias Taylor Durgante
Eucaliptus dunnii
presteaming
conventional drying.
Eucalyptus dunnii
/i>
pré-vaporização
secagem convencional.
Severo, Elias Taylor Durgante
Eucaliptus dunnii
presteaming
conventional drying.
Eucalyptus dunnii
/i>
pré-vaporização
secagem convencional.
title_short QUALITY OF SAWN TIMBER DRYING OF Eucalyptus dunnii
title_full QUALITY OF SAWN TIMBER DRYING OF Eucalyptus dunnii
title_fullStr QUALITY OF SAWN TIMBER DRYING OF Eucalyptus dunnii
QUALITY OF SAWN TIMBER DRYING OF Eucalyptus dunnii
title_full_unstemmed QUALITY OF SAWN TIMBER DRYING OF Eucalyptus dunnii
QUALITY OF SAWN TIMBER DRYING OF Eucalyptus dunnii
title_sort QUALITY OF SAWN TIMBER DRYING OF Eucalyptus dunnii
author Severo, Elias Taylor Durgante
author_facet Severo, Elias Taylor Durgante
Severo, Elias Taylor Durgante
author_role author
dc.contributor.author.fl_str_mv Severo, Elias Taylor Durgante
dc.subject.por.fl_str_mv Eucaliptus dunnii
presteaming
conventional drying.
Eucalyptus dunnii
/i>
pré-vaporização
secagem convencional.
topic Eucaliptus dunnii
presteaming
conventional drying.
Eucalyptus dunnii
/i>
pré-vaporização
secagem convencional.
description In the present study, the behaviour of Eucalyptus dunnii wood drying in a conventional pilot kiln was evaluated, using three drying schedules. Each drying schedule had an initial vaporization (presteaming) of 3 hours after one hour of initial warming and an intermediate vaporization of 5 hours for the collapse recovery when the wood was at 17% of humidity. The results show that among the used drying schedule only the schedule regarded as the mildest presented a good result in terms of dry wood quality. Among the discovered defects, there were 37,5% of collapse, 35% of cupping and 10% of split. Hoviever, though from this total only 15% of the collapse and cupping were regarded as strong defects.
publishDate 2000
dc.date.none.fl_str_mv 2000-03-30
dc.type.driver.fl_str_mv info:eu-repo/semantics/article
info:eu-repo/semantics/publishedVersion
format article
status_str publishedVersion
dc.identifier.uri.fl_str_mv https://periodicos.ufsm.br/cienciaflorestal/article/view/399
10.5902/19805098399
url https://periodicos.ufsm.br/cienciaflorestal/article/view/399
identifier_str_mv 10.5902/19805098399
dc.language.iso.fl_str_mv por
language por
dc.relation.none.fl_str_mv https://periodicos.ufsm.br/cienciaflorestal/article/view/399/271
dc.rights.driver.fl_str_mv info:eu-repo/semantics/openAccess
eu_rights_str_mv openAccess
dc.format.none.fl_str_mv application/pdf
dc.publisher.none.fl_str_mv Universidade Federal de Santa Maria
publisher.none.fl_str_mv Universidade Federal de Santa Maria
dc.source.none.fl_str_mv Ciência Florestal; Vol. 10 No. 1 (2000); 109-124
Ciência Florestal; v. 10 n. 1 (2000); 109-124
1980-5098
0103-9954
reponame:Ciência Florestal (Online)
instname:Universidade Federal de Santa Maria (UFSM)
instacron:UFSM
instname_str Universidade Federal de Santa Maria (UFSM)
instacron_str UFSM
institution UFSM
reponame_str Ciência Florestal (Online)
collection Ciência Florestal (Online)
repository.name.fl_str_mv Ciência Florestal (Online) - Universidade Federal de Santa Maria (UFSM)
repository.mail.fl_str_mv ||cienciaflorestal@ufsm.br|| cienciaflorestal@gmail.com|| cf@smail.ufsm.br
_version_ 1822181488047685632
dc.identifier.doi.none.fl_str_mv 10.5902/19805098399